My Reference dialogue box is not appearing separately but it's embedded within autocad. This leaves me with a very small area for the drawing. How do I make it pop up separately. AutoCAD 2012. See attached snapshot.
View 1 Replieshow to turn off the Block Reference Dialogue Box that appears when you put your cursor over and object or text?
View 2 Replies View RelatedI have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
I'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
New illustration of concept:
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
there is problem with my auto cad.when i double click on dwg file, Auto cad run and file open in it....its ok...same time when i click another dwg file Autocad run again Separately and file open in it not in already running Autocad. if i open 2,3 or more dwg files same time each time Autocad run separately.
View 9 Replies View RelatedI just had to reinstall AutoCAD this week for being a very bad boy. Now, when I switch between open files, my screen goes blank. It takes a regen to get all my stuff to appear again.
It even goes blank in my viewport... I have to go into the viewport and regen separately from the main drawing.
Is it possible to emboss multiple elements at once, without selecting each of them separately? I got over 2k elements on sketch which are needed to be embossed, it would be really pain to do it manually.
View 6 Replies View RelatedWhen drawing in .stb-file (with layer dependent plot style, plotting in monochrome) and when Dimension Text Style is set to Romans (must not be changed), then how to change line weight of Lines and Text separately?
View 3 Replies View RelatedI'm working on a link between AutoCad and Excel. In order to complete the tasks at hand, I need the measurement units to be in a decimal form, and not the traditional feet and inches. Is there a way to set data extraction units separately from the regular dimensional styles? Or have you figured out a way to do this from the Excel side?
View 5 Replies View RelatedHeres the issue;
I created my main corridor which is a 4 lane arterial with ditching on both sides targeted to my prelim surface. On my main corridor i have several intersections and approaches which i created intersections for and set the targets so they are correct, i also created secondary roads for all intersections. Now that it is visually correct there is a few things i would like to do.
1) Combine all intersections to my main corridor and create surface for adjusted volumes.
2) Raise combined corridor and intersections to adjust cuts / fills so that all attached intersection and adjacent corridors adjust with the main corridor.
Do i have to go to my main corridor profile and move each curve and tangent separately, then check all other profiles and intersection to insure everything has been adjusted?
what I want is to set the frames separately and not globally, as it is provided when saving the GIF image.
So, is there any tool to set the delay between the frames but separately?
E.g. I have two frames, let's say f1 and f2, what I want is a delay 10 secs (10k ms) between the f1 and f2, and then a delay 10 ms between f2 and f1.
I have "Sweet On You" spelled out in 3D with each letter having its own layer. Can I render the individual 3D layers together or do I have to do them separately? What should the letters look like after they're rendered? When I render them individually, the previously rendered letter turns white.
View 10 Replies View RelatedIn cs6 if I have two objects in a group I just select one and move it. In CC it moves all of the objects in a group.
View 1 Replies View RelatedI'm having some audio issues which seem to be a recent developement, possibly since the last update.
some audio files on my timeline have a click at the begining of the file, even when an audio dissolve is applied.
even worse, on export, some audio cuts have an enormous 'Boing' sound, like a delay effect.
the only way I can seem to get around this is to export the audio seperately via Audition.
I'm using premiere Pro CC on a mac pro, with Mountain Lion.
I've just created a load of subpaths with strokes now when i try to move their anchor points the stroke doesn't follow it.
View 3 Replies View RelatedIm fairly new in using 3DS Max and would like to ask for tips in how should I go about creating my first game design.
I have few questions and I hope that members of the forum enlighten me on these issues:
1. How do I define the dimensions of things in 3DS max so that it follows the iPad/iPhone specs?
2. Should I create the models/characters separately then import them all together in the map that I created or I create them all together in the same file with the map?
Why am i forced to open up parts separately when trying to open my assembly. Once I open my assembly I get pop up windows asking me to either open, skip, or find the part it specifies.
View 2 Replies View RelatedI have one LW polyline consisting lines and one or two arcs. I want to calculate length of all line segments and arc segments separately and the resulted values to be shown as attributes (seperate attributes for line segments and arc segments).
View 3 Replies View RelatedI’m trying to take several layers from a group, merge them, and export them into jpgs, then move on to the next layer group. Saving all the files in a new directory called "images" My layers are organized into groups, I’d also like to be able to have the script ignore layers that end with a specific character (or some other tag)
[URL]
This one exports the top visible layer(s) as a jpg with the same filename as the .PSD
<code>
function createFolder( folderObj ){ if( !folderObj.parent.exists ) createFolder( folderObj.parent ); if( !folderObj.exists ) folderObj.create(); }; function exportSFW( doc, saveFile, qty ) { var exportOpts = new ExportOptionsSaveForWeb( ); exportOpts.format = SaveDocumentType.JPEG exportOpts.includeProfile = true;//default false exportOpts.quality = qty; if ( saveFile.exists ) saveFile.remove( ); doc.exportDocument( saveFile, ExportType.SAVEFORWEB, exportOpts ); };
[code]....
I am having issues with rigging a simple character in Maya 2013. I was able to set up the joints and the skeleton but when I move the joints to start animating, the model moves separatly from the skeleton. It seems to be moving in the same direction but exponentially more than the skeleton, creating separation between the model and the skeleton. I am new to rigging and was going off the tutorial and am stuck at this point.
View 2 Replies View RelatedI've created a collage using Microsoft Picture It! by cutting images out of photographs and layering them. Can I open this file in Photoshop Elements and be able to move the layered images around separately?
View 1 Replies View RelatedAutoCAD LT crashes without any dialogue box, in a matter of seconds. This has happened to a whole set of drawings. I have purged, audited, recovered all and copied all the drawing documentation into a new drawing file and it still occurs.
View 3 Replies View RelatedI'm using AutoCAD 2012 and when I try and start the 'ARRAY' command I do not get the popup dialogue box like in earlier versions. I remember recently having the same issue with the HATCH command, but this was solved by altering the 'HPDLGMODE' setting. I've looked for a similar setting for ARRAY but so far come up with nothing.
Any settings that will revive this dialogue box?
Autocad used to perform the LOFT command partially in the COMMAND LINE and additional properties could be setted in the DIALOGUE BOX.
I used to draw my lofted elements :
1. Pick sections in order
2. Following Guide, Path,...
3. Dialogue box ( sections smooth fit, ruled, normal to,...)
4. Volume was drawn.
Nowdays it's a bit more extended but in step 2 when u pick a path the volume is drawn immediately and I can't append additional properties like in step 3.
Filedia is on 1
How do I get to the Loft dialogue box ?
when I use the insert command by typing I, I used to get a dialogue box in order to locate the file I wanted to insert, but now I do not get the dialogue box, I get the box with the WBLOCK command when I type W. I have ATTDIA set to 1 and changed it several times to no avail.
View 7 Replies View RelatedIs it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies View RelatedNot sure if this is a graphics card issue or not but I'm running autocad architecture 2011 and when I open the layer dialogue box none of the layer names, linetypes, colors and such show's up. The box opens fine, but I can't see anything within the dialogue box. The file that is currently open shows through into the dialogue box.
View 2 Replies View RelatedAfter trying to rotate a view in a viewport window, I have lost the ability to pick the viewport and right-click to bring up the properties list. What did I change?
View 2 Replies View Relatedhow to access offline help dialogue box, which contains in the form of contents so that I can learn AutoCAD systematically? I have AutoCAD 2013 & I have installed 237 MB offline help setup too.
View 8 Replies View RelatedSuddenly today my open dialogue box has reverted to an old-fashioned looking small thing about 7" x 4 1/2" which only shows 7 files at a time. Always before I got a nice big Windows Explorer style box nearly filing the screen. I'm running Windows 7 and Inventor 2011. Is there a switch somewhere to revert to the 'old' type box and that's got switched somehow?
View 4 Replies View Related