when I publish to PDF, CAD automatically names the PDF file as the drawing name and then the tab name eg, Radome Lighting Mounts - 22-095 with the Radome Lighting Mounts being the drawing name and 22-095 being the name of the layout tab.
My question is, are you able to reverse this so that the file name of the PDF reads 22-095 - Radome Lighting Mounts?
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
Â
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
Â
P.S. Here is an example of what I mean:
Â
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
Â
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
I have no problems publishing to one file from multiple tabs, or plotting to multiple single files named after each tab. I want to batch plot to a single file with bookmarks named after each tab in my AutoCad file. I would think that it would name each bookmark "Filename-TabName" as it goes down the batch plotting (publishing) list. Right now, I print to individual files and combine. This creates bookmarks for each filename like I want, but I have to name my tabs in order, or re-order everything each time which is time consuming.
Is there a setting to create bookmarks as you print to a single file that are named after each tab? This would be cool and very useful. I cannot imagine that I am the only one who wants this.
I changed my Publish options on the Project Navigator for publishing to PDF as a single sheet per sheet layout. Now I want to put it back so that when I publish it does ALL sheet into one PDF file and I can not figure out how to put it back. Now ever time I publish it does each sheet as a separate pdf.
View 5 Replies View RelatedIf I open a drawing created in 2009 and try to publish it in 2010, DSD file message pops saying about unsaved changes (see attached). Since I don't use sheet sets, I do not have any use for DSD file. Is there a way to disable it?
In 2009 it was simple not to include model tab while publishing. Where is this option in 2010? I don't want to remove model tab from the list every time I publish drawings.
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
On the web I have seen a video on how to make an app from your Edge Animate project [URL]. I have tried to follow this video, but when I publish my project, no .zip file is created.
View 7 Replies View Related1) Is it possible to extract data from dwf file in autocad 2012?
2)I need to extract blockNames from dwg file but i dont know how to extract blackNames because text in dwg file may change but pattern will remain same.
I am using Visual studio 2010 and Autocad 2012
I'm looking for a way of retrieving command names defined in an arx/dbx file, and doing it from an external process (i.e. without loading the file into AutoCAD).Ditto for checking the Acad version the arx was compiled for.
View 9 Replies View RelatedI'm trying to get the filenames of some drawings in a folder. I've got the following code, but it's not working. I get a file count from the line "filecount = objFiles.Count", so it's recognizing "objFiles" as the collection of files in the folder, but everything after that simply does nothing. Oddly, I can change the "If" statement from "<>" to "=", and it still reads the "Then" statement in both cases. However, the FileName is blank.
Dim objFile As FileDialogs
   Set objFile = New FileDialogs
   objFile.Title = strFolderName
   objFile.StartInDir = "C:Documents and Settings"
   strFolderName = objFile.ShowOpen
Â
[Code] ...........
Is it possible in Lightroom to automatically append/prepend directory names in the file path into the file name itself? Example:
Â
DirectoryA Sub-directoryB filename.jpg (original file name)
Â
==>Â
Â
DirectoryA Sub-directoryB DirectoryA_Sub-directoryB_filename.jpg (concatenated new file name)
Â
If this is not natively possible within Lightroom, any plug-in that delivers this functionality?
All my efforts to make PDF files has failed. I get empty PDF files, and I have tried almost all variations of settings.
View 14 Replies View RelatedI need to export 3dpolylines from C3D 2013 to an ERSI SHP file.
Using the mapexport command I’m able to do this, however, the lines in the shp file don’t retain the layer name and colours that are in the C3D file.
Do I need assign ‘object data’ (or something similar) to the 3D polylines before exporting the shp file.
Can I copy the file names of open dialog box?
View 4 Replies View Relatedis there a way of find and replace tab names in one drawing file? one file with six tabs named 001 rev A, 002 rev A etc. i would like to change all the "rev A" to "rev 0" with out going into each tab seperatly and changing them.
View 2 Replies View RelatedI am getting an error and crash when trying to publish to pdf file in X5.
View 3 Replies View RelatedI thought I had found the answer to file naming nightmares with the autogenerated sequential numbers in Vault. Â Everything went OK until I renamed some frame generated files with the design assistant and checked those in. Â Vault obviously doesn't look to see if a file name is already in use because it did not go to the next free number, it just blindly continued with the sequence, ignoring the fact that those names were taken.
Is there any way to have Vault check and keep proper count when parts are added or renamed manually? Â Or at least manually set the counter to the next available number?
I'm trying Frame Generator one last time to design the custom frames we build for our equipment. I've always had problems with getting FG to generate the right part numbers and file names. I have the part numbers figured out, but does Frame Generator still not have a good way to automatically create unique file names for frame members? If no one can get it to automatically generate unique file names, how do you manage all of the duplicate file names generated over time?
View 1 Replies View RelatedI have a data shortcut file where i keep my EG surface that now has File Name.dwg [DS] [DS] [DS] [DS]. What's the deal? Has this managed to morph itself into something it's not. It used to have only one, had two for awhile, and now 4 references to the DS (Datashort cut project folder).
Have I done something wrong here to get these wonky file names, would be nice to see just 1 reference being made to my DS Project folder.
my plot file names don't include the drawing name, only the layout name. it used to include the drawing name. i must have changed something but i don't what.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
We are using a title block and it has an attribute field that links to the file name. Now one of our projects is adding the revision to the CAD file name, but it messes up our drawing sheets.
i.e. It was fine when the CAD file name was 111-A222-ZZ-X-123456.dwg and this would display the complete 111-A222-ZZ-X-123456 in the drawing title.
Now we need to do this, the CAD file name, 111-A222-ZZ-X-123456-001002-A1.dwg and we still need to just show 111-A222-ZZ-X-123456 in the title block, striping away the 001002-A1.
I notice that whenever I plot with DWG to PDF.pc3 the filename for the PDF always comes out as:
(.dwg file name)-(paper space name).pdf
Is there any way to change the inputs for this? Let's say for example I wanted AutoCAD to automatically insert a timestamp at the end for me, so that the filename is always:
(.dwg file name)-(paper space name)-(date and time here).pdf
This would keep me better organized and also make it easier for my less computer savvy coworkers to go through old drawings and see changes between drawings. I know I could type it by hand every single time, but why do that if there's a way to have AutoCAD do it for me
I have a parent directory with x-amount of folders contained inside. I say X-amount because I would like to keep adding or deleting folders as time progresses. I want the folders contained within this parent directory do be read into a lisp variable and then be printed to the command prompt till every folder is displayed by name, then the loop may stop.
View 5 Replies View RelatedI have a text file with a list of image tile names with their bottom left hand easting and northing see attached. I have a lisp that asks for the name of the image then should  insert the image at its coordinate with a predefined scale and rotation but it isn't working so I would like an alternative method to test.
View 4 Replies View RelatedI can no longer change the name of raw files when saving as JPEG. Software will convert to JPEG but only with the same file name. Previously saved files work fine.
View 1 Replies View Relatedi'm currently working on a new website with a friend, we are using Dropout to share the files, he's the coder, and i design. Im using a pc at the moment, and he's on a Mac, when i save my files, they are saved with capital letters, and to upload it in dreamweaver on a Mac they cant have capital letters. So my question is, is it possible to change the file name to .jpg instead of .JPG? And how do i do it?
View 2 Replies View RelatedIs there a way to print filenames from Paint.net?
View 7 Replies View RelatedI would like to add in the right down corner, the file name of the picture.... I did it in the past under Picture Lab but I do not know how to do it under VideoStudio... Is it possible ?
View 2 Replies View RelatedI'm using Photoshop and the Fit Image command to resize my images for a slide show program. The slide show software does not offer the ability to place the image number anywhere on the image. Is there someway to write an action in Photoshop that will grab the image name and place it where I designate on the image? Even stretching the canvas and filling with black and placing the name there would work. I'm not sure if this is possible or if I need to find an Apple Script to do this.
View 7 Replies View RelatedHow do I get the file names for the photos I imported into Lightroom 4 to show up.
View 2 Replies View RelatedIs it possible to watermark my images with their filenames in Lightroom 5?
View 2 Replies View Related
