i have some drawings that i wish to print in B&W, some have monochrome.ctb in the selection box and the other one's have monochrome.stb, what is the difference between ctb and stb and can I changed them somehow?
The problem I am having is I can not print in B&W when the drawings are using stb but can when they are ctb
What is the difference between Actual Pixels and Actual Print Size?
View 15 Replies View Relatedwhat is difference between .dwg, .dwf, .dxf files.
View 6 Replies View Relatedin autocad civil 3D, there is a A value for alignment design. What is the difference between A value and K value?
View 4 Replies View RelatedI've never really understood the reasons behind choosing between shx and ttf fonts. It always looked to me that the shx fonts were more of a creation solely due to pen plotters where a filled font was slower to plot. But since the shx fonts are still out there and the pen plotters aren't, is this because of some other advantage or is it just a case of supporting legacy drawings?
View 3 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedQuestion - What is the difference between the world UCS and the top UCS?
I am working in a fairly large model and when I have the UCS set to world and do the ID command I get the correct coordinance. However when I am in a plan view and UCS is set to top the co ordinance come in roughly 600 feet different. How to set the UCS so that co ordinance will be the same no matter what UCS is being used? Or explain why this would be?
I've used Autocad for about 2 years now, but I've never had any contact with the coding aspect of it.
1) What is the difference between .lsp format and .fas?From what I gather, .fas cannot be editted (I think) so what is the advantage (if any)?
2) How would I convert a .lsp to .fas (or vice-versa if possible)?
difference between regen & update?
specially at the point of speed.
(thisdrawing.application.update) phrase can work exactly same with regen ?
which one is preferrable ?
Back in the day of AutoCAD in architecture school I would use the command DIM to dimension something.
Of course later when I type that in now I can't click anything and it doesn't work. I know to use Dimension Linear (DIMLIN) now but I was wondering what's the difference between the two- possilby between AutoCAD Arch and the regular version?
I'm using AutoCAD Architecture 2013.
difference between a customized workspace and a saved profile? What are the specific uses of each?
View 2 Replies View RelatedMy drawing office is in need of a Plotter.
Would a Hp printer be sufficient,or is a Plotter more suited to the task.
What are the differences between a Plotter and Printer?
what's the different between
Dim oDb As Database = HostApplicationServices.WorkingDatabase
and
Dim oDb As Database = Application.DocumentManager.MdiActiveDocument.Database
why this difference in weight is appearing? Obviously i probably did something wrong. But what?
Inventor Version: 2014 SP1
Config : Intel (R) Xeon (R) CPU E5506 @ 2.13 GHz, 24 GB, 64bit win7
what the difference is between the landing and a dogleg of a mleader? What is the difference between the properties:
EnableDogleg
DoglegLength
EnableLanding
LandingGap
Difference between the two windows UNITS and STARTUP What is the unit to adjust?
For example, the If I UNITS I set the units to meters What is the difference with the STARTUP Set the meter to be.
Any way to get an expression that calculated the difference between two points and pick up the results as point elevation.
View 5 Replies View RelatedWhat actually is the difference between the standard sheet eg ARCH D (36x24) and ARCH Expand D (36x24) sheet sizes? this have to do with printable margin areas?
View 3 Replies View RelatedI want to delete unnecessary templates. I use metric ones, and there are two metric assembly templates. What are, in general, the differences between assembly templates?
There are many style differences between drawing templates, but for part and assembly?
I am joining plines on the same layer, etc. I was taught to use PEDIT-Join but noticed that I can do the same function with just the JOIN command. Is there any difference? Is one better/safer to use?
View 7 Replies View Relatedthe difference between a '3d solid' and a 'mass element' - or point me to a reference?
View 4 Replies View Relatedthis question is related to 3D modeling in HVAC detailing, piping and plumbing
What is the difference between a circular and nested xref?
except for the quantity of the line . the case is I was taught to make a title block tempelate. For each single item, like text"STUDENTS NAME " or "PART NMAE" , and inluding the attributes, I was instructed to use single line text instead of mutliple line. I was told that single line won't change. What does it mean it won't change?
I feel that single line is more precisely controlled ,while the multiple line text is more ofen used in puting the notes in a drawing. But in what case use what I am confuesd. Especailly when make the tible block, It seems to use the single line text is the unique way to make each feature in its status.
difference between Trim and Pline Boolean operation?
View 5 Replies View RelatedWhat is the difference between Constrain and Assemble?
They both seem to create the same mating constraints, but Assemble doesn't work with adaptive parts.
Any other difference (other than the interface)?
why there is huge difference in Dynamic Simulation results when you use two different input methods? I used input grapher and in linear ramp, I entered input (time/ distance) manually for 6 points and ran simulation. Then I used Spline and used a text file to enter SAME data and it gave me at least 10 times different results. Can't figure out why this difference. This changes my entire design.
View 3 Replies View RelatedI can draw a closed polyline representing a closed area.
I can then toggle its 'closed' property and it seems to make no difference. area is same, I can extrude or create regions, I can hatch in either case.
in which specific situations we should bother about whether a polyline is closed or not?
what is the difference between extrude and sweep command in terms of extruding a close polyline using a path?
View 4 Replies View Relateddoes it make a difference if its a line or a poly line? in oder for this command to work?
View 9 Replies View RelatedWhat is the difference between a regular block and a wblock?
Or is wblock just a command?
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.