AutoCAD Civil 3D :: Difference Between A Value And K
Mar 11, 2012in autocad civil 3D, there is a A value for alignment design. What is the difference between A value and K value?
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Difference Elevation Between Two Points
Mar 21, 2013Any way to get an expression that calculated the difference between two points and pick up the results as point elevation.
View 5 Replies View RelatedAutoCAD Civil 3D :: Difference Between Pedit And Join
Jan 5, 2014I am joining plines on the same layer, etc. I was taught to use PEDIT-Join but noticed that I can do the same function with just the JOIN command. Is there any difference? Is one better/safer to use?
View 7 Replies View RelatedAutoCAD Civil 3D :: Calculate Difference Between 2 Different Cross-sections?
Feb 5, 2013With reference to the picture attached, I am trying to find the overlapping area between two different cross-sections. I.e.the area of green minus the area of white.
The hard way to do it would be to sketch a closed polyline over the area I want but I have about 100 of these to do and more to come.
Windows 7 64-bit
Intel Core i7-3840QM 2.80GHz
NVIDIA Geforce GTX 680M 4GB
16GB RAM
AutoCAD Civil 3D :: Difference Between Flooded And Surcharged Nodes
Aug 19, 2013difference (and the utility) for displaying a flooded (blue) and a surcharged (red) node? I assume that the surcharged (red) node is when water is bubbling out of the grate, what is the flooded node, and when would I want to check on the flooded nodes?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCAD Civil 3D :: Difference Between Contour And Surface Smoothing
Apr 21, 2013Which is better to do: contour smoothing or surface smoothing? I did a little test with a surface with no smoothing, a surface with contour smoothing set to medium, and a surface with surface smoothing. The results puzzled me. The contours in the surface with no smoothing matched the contours of the surface with surface smoothing. The profiile of the surface with no smoothing matched the profile of the surface with contour smoothing. Are these results typical? I was surprised that the contours of the surface with surface smoothing didn't look smoother. I was also surprised that the surface with no smoothing and the surface with contour smoothing generated the same profile.
View 3 Replies View RelatedAutoCAD Civil 3D :: Incremental Station Elevation Difference Report
Nov 18, 2013I need to conceive a Incremental Station Elevation Difference Report (Toolspace - Toolbox) where each station is worth 20 meters. But I don't know how to set C3D 2013?
View 2 Replies View RelatedAutoCAD Civil 3D :: Report For Incremental Station Elevation Difference
Mar 20, 2013I have more than 200 alignments of road network. The profile design are already done for this. I want to generate Incremental Station Elevation Difference report for all the alignments.
For this I have to select each alignment, its respective profile & generate the report for it. As am having more than 200 Alignments I will have to repeat the process 200 times. Is there any way to make the process easier like generating report for all the alignments at once?
AutoCAD Civil 3D :: Creating Thickness Contours (difference Between 2 Surfaces)
Mar 1, 2012I have created 2 surfaces of a matierial that is buried, using drill hole data. I have a surface for the top, and then a surface for the bottom of this material. I then created a 3rd suface comparing these 2, creating an isopac contour showning the thickness of the material. My question is this:.....is there a way to make the zero (0) contour show up? I have a .5 contour interval, but 0 doesn't generate. Could i be missiing something in the settings?
View 9 Replies View RelatedAutoCAD Civil 3D :: Profile View Data Level Difference Units?
Mar 8, 2013In my profile view I have existing and proposed levels in m.
The level difference is also in m but I'd like it to be scaled to show mm, as this is quicker to read on site.
Is there some way to edit the equation and multiply by 1000?
AutoCAD Civil 3D :: What Is The Difference Between Set Working Folder And Set Data Shortcuts Project Folder
Jul 12, 2012I created a new drawing in a project that already has a data shortcut folder created. How do I attach to it?
What is the difference between "Set Working Folder" and "Set Data Shortcuts Project Folder"
AutoCAD Civil 3D :: Difference Between Override And Child Override?
Sep 6, 2013What is the difference between an Override and a Child Override?
Why do some sections have Override Check Boxes but no Child Override Arrows, and vice versa?
What happens when you click a Green Check Mark in the box?
What happens when you click a Red "X" on the arrow?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
AutoCad :: What Is Difference Between DWG / DWF And DXF
Mar 5, 2007what is difference between .dwg, .dwf, .dxf files.
View 6 Replies View RelatedAutoCAD LT :: Difference Between SHX And TTF Font
Feb 21, 2008I've never really understood the reasons behind choosing between shx and ttf fonts. It always looked to me that the shx fonts were more of a creation solely due to pen plotters where a filled font was slower to plot. But since the shx fonts are still out there and the pen plotters aren't, is this because of some other advantage or is it just a case of supporting legacy drawings?
View 3 Replies View RelatedAutoCad :: Print In B&W - Difference Between CTB And STB
Jul 31, 2013i have some drawings that i wish to print in B&W, some have monochrome.ctb in the selection box and the other one's have monochrome.stb, what is the difference between ctb and stb and can I changed them somehow?
The problem I am having is I can not print in B&W when the drawings are using stb but can when they are ctb
AutoCAD 2010 :: What Is The Difference Between World UCS And Top UCS
Feb 15, 2013Question - What is the difference between the world UCS and the top UCS?
I am working in a fairly large model and when I have the UCS set to world and do the ID command I get the correct coordinance. However when I am in a plan view and UCS is set to top the co ordinance come in roughly 600 feet different. How to set the UCS so that co ordinance will be the same no matter what UCS is being used? Or explain why this would be?
AutoCAD 2013 :: What Is Difference Between LSP Format And FAS
Nov 5, 2013I've used Autocad for about 2 years now, but I've never had any contact with the coding aspect of it.
1) What is the difference between .lsp format and .fas?From what I gather, .fas cannot be editted (I think) so what is the advantage (if any)?
2) How would I convert a .lsp to .fas (or vice-versa if possible)?
AutoCAD VB :: Difference Between Regen And Update?
Mar 29, 2011difference between regen & update?
specially at the point of speed.
(thisdrawing.application.update) phrase can work exactly same with regen ?
which one is preferrable ?
AutoCAD Architecture :: Difference Between DIM And DIMLIN?
Nov 16, 2012Back in the day of AutoCAD in architecture school I would use the command DIM to dimension something.
Of course later when I type that in now I can't click anything and it doesn't work. I know to use Dimension Linear (DIMLIN) now but I was wondering what's the difference between the two- possilby between AutoCAD Arch and the regular version?
I'm using AutoCAD Architecture 2013.
AutoCad :: Difference Between Workspace And Profile
Jan 26, 2014difference between a customized workspace and a saved profile? What are the specific uses of each?
View 2 Replies View RelatedAutoCad :: Difference Between A Plotter And Printer?
Jul 21, 2011My drawing office is in need of a Plotter.
Would a Hp printer be sufficient,or is a Plotter more suited to the task.
What are the differences between a Plotter and Printer?
AutoCAD .NET :: Difference Between Database Definitions
Apr 22, 2013what's the different between
Dim oDb As Database = HostApplicationServices.WorkingDatabase
and
Dim oDb As Database = Application.DocumentManager.MdiActiveDocument.Database
AutoCAD Inventor :: Difference In Weight Is Appearing?
Oct 14, 2011why this difference in weight is appearing? Obviously i probably did something wrong. But what?
Inventor Version: 2014 SP1
Config : Intel (R) Xeon (R) CPU E5506 @ 2.13 GHz, 24 GB, 64bit win7
AutoCAD .NET :: Difference Between Landing And Dogleg Of A Mleader?
Jun 23, 2013what the difference is between the landing and a dogleg of a mleader? What is the difference between the properties:
EnableDogleg
DoglegLength
EnableLanding
LandingGap
AutoCAD 2013 :: Difference Between UNITS And STARTUP
Sep 8, 2013Difference between the two windows UNITS and STARTUP What is the unit to adjust?
For example, the If I UNITS I set the units to meters What is the difference with the STARTUP Set the meter to be.
AutoCAD LT :: Arch Sheet Size Difference
Jul 25, 2013What actually is the difference between the standard sheet eg ARCH D (36x24) and ARCH Expand D (36x24) sheet sizes? this have to do with printable margin areas?
View 3 Replies View RelatedAutoCAD Inventor :: What Is The Difference Between Assembly Templates
Aug 12, 2013I want to delete unnecessary templates. I use metric ones, and there are two metric assembly templates. What are, in general, the differences between assembly templates?
There are many style differences between drawing templates, but for part and assembly?
AutoCad 3D :: Difference Between 3d Solid And Mass Element
Mar 30, 2011the difference between a '3d solid' and a 'mass element' - or point me to a reference?
View 4 Replies View RelatedAutoCad 3D :: Difference Between Circular And Nested Xref
Aug 18, 2011this question is related to 3D modeling in HVAC detailing, piping and plumbing
What is the difference between a circular and nested xref?
AutoCad 2D :: Difference Between Multiple And Single Line?
Feb 12, 2013except for the quantity of the line . the case is I was taught to make a title block tempelate. For each single item, like text"STUDENTS NAME " or "PART NMAE" , and inluding the attributes, I was instructed to use single line text instead of mutliple line. I was told that single line won't change. What does it mean it won't change?
I feel that single line is more precisely controlled ,while the multiple line text is more ofen used in puting the notes in a drawing. But in what case use what I am confuesd. Especailly when make the tible block, It seems to use the single line text is the unique way to make each feature in its status.
AutoCad :: Difference Between Trim And Pline Boolean?
Dec 27, 2011difference between Trim and Pline Boolean operation?
View 5 Replies View Related