I am currently searching for a way to link a mid for a section, to a section cut on a plan. The plan and the section are in different CAD files. We are wanting to make it so we can change the number on the mids and it will update on the plan sheets.
View 5 RepliesI am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedI'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedIn my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedI think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedI need to divide a bridge deck section (sort of trapezoidal shape with circular hollow section inside) but I need to keep the centroid level of each section to be at the same height. is there any simple way of doing it using Autocad 2014?
View 0 Replies View RelatedIn the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedSo, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View RelatedI am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedI am using AutoCAD 2013
My solid model is imported from IGES file format. I'd like to make a plane at specified location (perpendicular from the surface), and I'd like to have a cross sectional geometry cut by that plane. (attached pic.)
1. How can I make a plane following perpendicular line from the surface?
2. How can I export the cross sectional geometry?
When you start a new drawing, you use a DWT
When you insert a pagesetup/layout, you use a DWT
When you insert anything else (like your default layers into an existing drawing), you use DWG.
However, in the described case... the DWG would basically be the same as the DWT (as it would be your default layer setup, or have your company styles etc), so you would create the DWG by going to new and then save immediately.
What bothers me about this is that you then basically have two files... which should be one file - or at least they should be linked: version control.
How do I make sure, non-manually, that the "template DWG" and the "template DWT" are the same, remain the same etc? Or how do I eliminate one of the two?
AutoCAD Mechanical has the "Drawing Setup" utility to import a DWT - am I just overlooking a similar option in Vanilla?
Well I had a day and a half trying to figure out how to bring Excel data into LT. Again. Here is what I have found out:
Running Excel 2010 I have a xls files (of type '97-2003 xls - file includes VBA). The file spits out a ton of data that I want to put in a schedule in AutoCAD. The schedule format needs to match our standard format - RomanS in white and blue.
If I copy and paste as a link the font remains stuck as Arial (regardless of source font) and can't be relaxed unless you go one cell at a time in the text editor. Also the resultant table size is tiny -
If I save the file to .XLSM (macro enabled '10 excel file) the results are the same. If I save the file to .XLSX ('10 excel file and ditch the VBA project) the results are sublime - the font is ok and I can go back and forth from AutoCAD to my now broken spreadsheet because VBA IS MISSING! The resultant table size is tiny but I can deal. I don't see how AutoCAD can work with xlsx but not xlsm.
I also found that if I save the sheet (values only) as a .csv file I can use that to create a table from file without font overrides screwing everything up.
I'm running AutoCAD LT 32bit on a Win7 32bit OS. My Office version is 2010. I would like to link data to a '97-'03 version of an xls or an xlsm without having the font overridden to Arial.
ACA 2011, 64bit.Trying to create fields that link to my aec project name, and number, and description. I'll use the AEC fields in my titleblock to make my titleblock management quite a bit easier.
If I open my template file and try to create a field that links to the AEC project "Project Name". It will come up as ####. I do not want to have a bunch of number signs in my titleblock. project number, and other fields show up as the same #######.
But if I create a new construct from the project navigator, open the new construct, and create a field that links to the AEC project "Project Name". It will come up as Project52. Autocad is now picking up the proper name, and number and everything works fine.
Shouldnt files that are opened in the old fashioned way be able to link to AEC fields? Or should I create & open all files from the project navigator from now on?
I am linking a model to an excel spreadsheet. Normally you would specify what cell on the first sheet (Sheet1) to start in. I have been told that you can link to other sheets in the workbook as well. Is this possible? I have tried, but have not been successful. If it is possible, how is it done?
View 6 Replies View RelatedHow can I link an external database(say access/oracle) to a drawing so that I m able to insert/update attribute directly from the autocad map drawing.
View 1 Replies View RelatedBasically what I am trying to do is link the length of a flange on one part to a different part. Am I able to take the dimension from another part and say I want this flange to be a certain length plus the seperate part dimension?
View 5 Replies View RelatedI'm currently working with AutoCAD Civil 3D Land Desktop Companion. The drawing has hundreds of callouts for different elements all over the site. The callouts are in form of a block, with a number inside. The number corresponds to a notes page which lists each detail in chronological order. (nothing new there)
Due to an expanding and shifting job site, notes have been added and deleted. The problem is now we have to go back through and update all the callout blocks. For example: We have 75 notes in our list, if note number 3 changes or is deleted, we need to go through and change all the numbers in all the blocks to reflect the change to the list.
Is there a way to link blocks to an mtext list? or possibly a spreadsheet?
I have created a new title block for my company and i have a revision table on it. I use the tabs to go from different paper spaces and i would like to find a solution to where if i enter information on my first page it will automatically copy exactly what i put to the other tables on the other tabs.
View 4 Replies View RelatedSo i have a box with a left side, right side, top, bottom and a door in an assembly.I've linked all the parameters to the 'right side component' so that when i change it, it updates all the other parts in the assembly.
What I want to accomplish is to be able to use my BASE SIZED BOX ( say 500 x 500 ) to create many different sized boxes.The problem I have is when I save the assembly as a new one and save and replace all the components for the bigger box, all the components still reference the old part ( 500 x 500 right side component) instead of the bigger ( 600 x 600 right side component.
how to link parameters, don't know ilogic, and just know the basics of assemblies and part modeling.
I need to know if there is a way to link an attributed F-N bubble with qty's to the BOM. This is for electrical wiring diagrams for aircraft. So I have serveral part numbers to a BOM, but no real accurate way of finding total quantities other than manually going though the drawing.
View 2 Replies View RelatedWhen I draw a new line from end point to end point using osnap, and then want to move that new line I drew, it also moves the lines I onsapped to.
View 1 Replies View Related