AutoCad :: Importing GPS Locations From MapSource To 2012
Aug 9, 2012
I'm attempting to import a .dxf file, with Waypoints, Waypoint Attributes, Tracks, Track Attributes, etc., from Garmin MapSource into AutoCAD 2012. I'm able to open the .dxf file in AutoCAD 2012 and visualize all of the points and attributes; however, when I attempt to select any item on the attribute layers, a Fatal Error Message is generated, reading: "FATAL ERROR: Unhandled e0434352h Exception at fd7ecacdh". The program issues this error and then automatically aborts after selecting "OK".
To be clear,I'm able to select the actual waypoints but never the attributes, which contain information relevant to the elevation of each point.
View 3 Replies
ADVERTISEMENT
May 30, 2013
I am new to using Tool Palettes. I have created a folder on my C: drive which contains all my tool palettes. Right now, I get the symbol of a circle with a line drawn through it and cannot use my tool palettes.
In the Options tab, I noticed that there are the "Tool Palettes File Locations" and also "Authoring Palette File Locations". What is the difference between the two? Do I need to do something to both so I can use my tool palettes without difficulty?
View 1 Replies
View Related
Dec 19, 2011
I’m using AutoCAD MAP 3D 2012. I’m trying to import a .mdb file. The text that I’m working from says because I’m working on a 64 bit machine I will have to download from Microsoft a file called Microsoft Access Database Engine and install the proper drivers. I’ve downloaded the file and run it and rebooted my machine but I still can’t bring in the .mdb file.
View 7 Replies
View Related
Jan 19, 2012
I am drawing in 3D in autocad 2012 and are getting solidworks models from the client. I also have solidworks 2011 installed on my machine and was trying to import the solidworks models into autocad as 3D solids.
View 4 Replies
View Related
May 29, 2012
Any time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.
View 9 Replies
View Related
Oct 11, 2012
Have an open image in gimp 2.8 on suse 12.2, I call the "import palette" function, I set 64 colors, step 32, check the "from all layers" etc etc, and in the preview I see the 64 color palette I'd like. Looks good.
BUT: underneath the preview it says "the selected source contains no colors."And continuing the palette is indeed empty.
-----BEGIN GEEK CODE BLOCK-----Version: 3.12GCS d--(+)@ s-:+ a C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y?------END GEEK CODE BLOCK------
View 1 Replies
View Related
Feb 15, 2013
This has happened repeatedly for me, importing a slate with soft text from 2012 corrupts my default library. I get-
"The following bins are corrupted: Default Library Choose recover or hit the Enter key to try and recover a backup version of the bins."
Recovering fails and I'm forced to hit cancel which let's me into the project with my media gone.
View 1 Replies
View Related
Jul 26, 2012
I would like to use my part number in the upper left hand corner of my dwg tab and also on my parts list tab as well as it original location in the title block of my dwg. How can I set this up so when I change the part number in my title block it will also automatically populate the other 2 locations? I am using Lt 2010.
View 2 Replies
View Related
Oct 25, 2013
I would like to know how to import locations which i have marked on Google map to AutoCAD, and i know the stratigraphic of those locations and i want to represent it in AutoCAD, I want it in such a way that when i click on that particular location in AutoCAD drawing, the stratigraphic should be shown for that location.
View 6 Replies
View Related
Oct 19, 2012
How do I set up the templates in 2013? we just migrated from 2012 and now some of the templates are not showing up. When we installed the vault we created a drive that the vault resides in. The templates also reside on this drive but outside of the vault. in 2012 when I selected the icon to create a new part/assy/drawing I would get the following drop down menu:
now in 2013 we have a new and imporved splash screen with more options, I think:
However as you can see, there is nothing to choose. If I use the drop down arrow this work, but not much as I have the 4 standard part, assy, drawing and project icons appear. We have used the options menu and changed the file search paths to point to our template folder but we still do not have any options in the new menu and the drop still does not show options for sheetmetal or square parts. The drawing does open with the correct template though. I have also opened each template in 2013 and saved it so it should be migrated to the new format. but that has not worked. How to set up the new splash menu to work?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 6 Replies
View Related
Apr 2, 2013
i put my lisp files path in the trusted locations and my lisps wont load.
they only load if i have the location listed in the support file search path.
View 5 Replies
View Related
May 17, 2011
I just upgraded from ACAD 2007 3d to 2012 3d. The rest of my organization is using a "mix" of older versions, so we still save to the 2004 format. Text objects "moving" to different locations or disappearing on opening files in newer versions of ACAD? I've had two instances so far. In one case, a 2012 LT user added a leader/text and the 2000 LT user could see it. The text was clearly there in the 2012 users file. In the other case, I opened a file I worked on in 2007 and text objects seem to be moved about randomly when looking at it in 2012. Everything still looks good with the file opened in the 2007 though.
View 4 Replies
View Related
Dec 18, 2013
I'm trying find some code that will allow me to save a PDF in 2 different locations.
I want to save a copy on my C: drive - this part has been done, but I'd like the code expanded to save a copy on the F: drive (under a similar path to that on the C: drive.
For example, for drawing XXX-XXX.dwg (C:Vault WorkspaceCADSalesEnquiries201313-XXXDrawings), I would like a PDF created in C:Vault WorkspaceCADSalesEnquiries201313-XXXDrawingsPDF (this part has been done) and i would also like a copy saved in F:SalesEnquiries201313-XXXDrawingsPDF.
I do not know which will be easier; to create 2 PDFs, or create 1 and copy it to F:
View 2 Replies
View Related
May 10, 2012
I want to display the network server name automatically (preferably using a diesel expression).
I currently use diesel expressions to show the saved path and drawing name, but since we have a multitude of servers I'd like to show the server name as well. At the minute it just shows the network map name, i.e. N:, but I'd like to prefix that with the actual serve name, i.e. SERV-FILE-1 (or something like that).
View 2 Replies
View Related
Nov 23, 2010
I was looking to insert a steel shape into an assembly, and can't seem to find the Content Center Files? I am using IV2011, any tips on where to located these files?....VAR used all default install locations
View 5 Replies
View Related
Apr 2, 2012
I work for the IT department of a company who uses Civ3d 2011.
We've a problem that when the software is deployed to machines it doesn't display the tool palettes. After some investigation and following steps on this website I've identified that the issue is the tool palettes are installed inn to the profile of whoevers account installs the software. if its deplyoed this will be the Sys Admin account and not the profile of the relevant user account.
What is the location of the tool palette settings within the registry or the relevant configuration files in the profile so that I can either script or embed it in to the package?
View 1 Replies
View Related
Dec 3, 2011
I have a unique challenge. I use my personal laptop for my CAD work at work. We are now setup with Vault 2012 and Inventor 2012 and we are setup to pull our Templates, standard files and content center parts from the vault.
I have become so busy that I would like to do some of my work at home on evenings and weekends. Other than the obvious problems of having no life and working for nothing, I am having the problem of not being able to access templates or CC parts at home. I can store the CC and templates on my C drive but am not sure where to set Inventor to point to the files on my drive or if there is an easy to do so depending on where I am.
View 1 Replies
View Related
Mar 28, 2012
When I create a parts list in an IDW for an assembly, I place it above our title block. The list seems to "snap" into place. Unfortunately, when a part is added to the assembly, the table expands into the title block. I want to keep the parts list headings at the top of table. Is there any way to make the table grow upwards, instead of down into the title block?
View 4 Replies
View Related
Apr 18, 2012
I am trying to revise my horizontal alignment by dragging it to locations. It is not adjusting the way i want around curves, it keeps moving one end when i change the other.I am working in civil 3d 2010, is there a way to change the constraints or revise it correctly?
View 4 Replies
View Related
Mar 14, 2012
how to make the circles on my parameter locations smaller? What controls this feature?
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
View 1 Replies
View Related
Jul 11, 2012
I would like to use iLogic to find the location of the points of a line, determine if the line is approximately vertical, and apply a vertical constraint if it is vertical.
Here is the code process I envision:
1. Automatically select a straight line.
2. Find the location of its end points.
3. Compare the X-value of the end points to see if they are vertically aligned (or almost so).
4. If they are vertically aligned, apply a vertical constraint.
5. Select next line and repeat.
Is this possible with iLogic? I don't see any way of calling a line's sketch points or finding their location.
View 4 Replies
View Related
Aug 21, 2013
I need to rough in a drainage pipe network that connects several structures around a site. The pipe inverts need to be 6.5' below the finished floor of each unit and must maintain a minimum 2% slope. The network needs an outfall at some undetermined point on the site. The pipes must follow some existing roads, so they are not interconnected directly to each structure.
How can I go about determining the potential outfall locations?
View 3 Replies
View Related
Nov 6, 2013
I am trying to extract part locations from an assembly file. I've been successful UNTIL I come to a part/subAssembly where the workAxes is orientated differently then the overall assembly axis. Is it possible to compare the local axis to the global axis? If the answer is 'yes', can sample code be posted (i.e. dim sameOrientation as bool; sameOrientation = ... )?
Also, once I know that "sameOrientation = false," how would one convert local coordinates to global coordinates?
View 2 Replies
View Related
Sep 6, 2012
I have been using survey database with the working folder set to the project location on our Z:. It was working fine until I come into work this morning and I can no longer open survey databases on the server. I can set the working folder and I can create new databases on the server but I cannot access them. Moving the working folder to a local drive fixes everything.
View 1 Replies
View Related
Aug 5, 2011
Is there a way (or a “trick”) to have one attribute at two different locations inside of one block (I want to avoid filling in the same text twice when this block is inserted or edited)?
View 9 Replies
View Related
Nov 13, 2012
How are arrowhead attachment locations calculated when using the Automatic Balloon command? Arrowheads seem to attached to objects at rather strange places!
I normally use auto-ballooning to place balloons within a drawing and then "season to taste". Is there a way to control how and where the arrowhead gets attached to an object?
View 3 Replies
View Related
Aug 22, 2011
I found this routine but It doesn't work really good (see attachment):
1. We can select block instead of typing the name of it (or simply add this option)
2. That the undo command undo the whole lsp routine instead of undoing all single insertion.
3. That we can Hit the escape key at any point in the routine and it stops the routine correctly instead of writing "too many argu" maybe by undoing the insertion or by stopping the routine correctly at this point.
4. I just found that it does not paste the block directly on the points...? Finally this lsp didn't work at all !
I would like to have a lsp that do SIMPLY this:
1 : Ask wich "points" you want to convert (You know these points that you can change the appearrance in the menu format point style, thats what I mean by "points"). And By the way it would be cool if I could choose to convert the points or to paste my block on those without converting them but it is not that important.
2. Select block in the block listing of insert block popup window and paste it by his default insertion point to all the selected points.
Infos: New blocks on current layer.
View 9 Replies
View Related
Jun 8, 2012
Im trying to come up with a lisp that will export x and y coords to a txt or cvs file. However, I need the lisp to export in this format
Units Inch
WPT 1 0 0 ( X=0 Y=0)
WPT 2 1 1 (X=1 Y=1)
WPT 3 2 2
I need to be able to set my zero with move origin and the export the points.
View 9 Replies
View Related
Jul 19, 2012
I add 3 folder locations to the Support File Search Path. At random, all 3 of these locations disappear. I haven't tracked when this happens and what maybe happened previously, but I know I'm not the only one within my office that this has happened to. The paths are on a file server for our blocks.
Not sure how relevant this is, but I have a HP Z420 Workstation, W7-64-bit, Autodesk Building Design Suite Ultimate, using AutoCAD MEP 2013.
View 9 Replies
View Related
May 15, 2013
recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 2 Replies
View Related
Sep 17, 2013
Is there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 2 Replies
View Related
