how to make the circles on my parameter locations smaller? What controls this feature?
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I've downloaded a DEM and made a surface from it creating a HUGE file. I only need about an eighth of that area. How can I crop the surface to be a smaller area? I realize I can create a boundary, but I really don't need all the data outside the boundary.... I want a smaller file so it doesn't have to create one of those *.mms files.
Surely I don't have to export the boundaried area as triangles to a regular ACAD file, then make a surface from those triangles... do I? Not that it's that big of a hassle, but seems like a roundabout way of doing things.
How can one make a survey file smaller? The current file is 11 mb with survey figures and cogo points. It takes too long to load versus simple cad. How can I speed it up?
When I exported to autocad, first it crashed, then the annotation ability seemed to be missing and the points scaled/disappearred.
Or is this how it is...
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have 3 circles, randomly spaced. They will always be the same size. I want to resize them all about there centre points using just one parameter in the properties fly out. I've created individual linear/stretch for each circle, but I can't work out how to combine them.
AutoCAD 2012 Structural Detailing SP1 & Revit Structure 64bit
Win 7 64bit
I am new to using Tool Palettes. I have created a folder on my C: drive which contains all my tool palettes. Right now, I get the symbol of a circle with a line drawn through it and cannot use my tool palettes.
In the Options tab, I noticed that there are the "Tool Palettes File Locations" and also "Authoring Palette File Locations". What is the difference between the two? Do I need to do something to both so I can use my tool palettes without difficulty?
I work for the IT department of a company who uses Civ3d 2011.
We've a problem that when the software is deployed to machines it doesn't display the tool palettes. After some investigation and following steps on this website I've identified that the issue is the tool palettes are installed inn to the profile of whoevers account installs the software. if its deplyoed this will be the Sys Admin account and not the profile of the relevant user account.
What is the location of the tool palette settings within the registry or the relevant configuration files in the profile so that I can either script or embed it in to the package?
I am trying to revise my horizontal alignment by dragging it to locations. It is not adjusting the way i want around curves, it keeps moving one end when i change the other.I am working in civil 3d 2010, is there a way to change the constraints or revise it correctly?
View 4 Replies View RelatedI need to rough in a drainage pipe network that connects several structures around a site. The pipe inverts need to be 6.5' below the finished floor of each unit and must maintain a minimum 2% slope. The network needs an outfall at some undetermined point on the site. The pipes must follow some existing roads, so they are not interconnected directly to each structure.
How can I go about determining the potential outfall locations?
I have been using survey database with the working folder set to the project location on our Z:. It was working fine until I come into work this morning and I can no longer open survey databases on the server. I can set the working folder and I can create new databases on the server but I cannot access them. Moving the working folder to a local drive fixes everything.
View 1 Replies View RelatedI needed to make a bunch of concentric circles (something like 30 or 40), and I used offset command; I'm wondering if there's a way to 'array offset'? It's already done and wasn't that difficult, but I just have to know..
View 2 Replies View RelatedI have a huge file that I am working with. I keep getting fatal errors. I am trying to make the file size smaller. Within the file there are 1836 layers, I am trying to reduce that number greatly. There are also lots and lots of blocks. I have heard that it is possible to make all of the objects on one layer and also compress layers.
View 9 Replies View RelatedI have xref-ed two .dwg files into my drawing. They are on top of each other, and now I want to make horizontal sections from several smaller areas containing both files. However, when I do, all lines turn olive green and I loose the original layer structure (in the section, that is, not the original x-ref).
Is there a way to make these sections and keep the original layers in the sections? I'd rather not use xclip.
How to make the dimension get bigger and smaller as we “scale” the drawing?
For example, the drawing in the screenshot below is scaled by 0.5 but that didn’t affect the “size” of the dimension (height of the text, extension lines, …).
Is there a way to get the dimension line affected as we scale the drawing such that the “dimension text” and the “extension line” are increased/ decreased with the scale factor?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
recommend a good way to indicate the location of cross section sample lines in a profile view (of same alignment) as vertical lines? the sample lines have been created at user defined locations from polylines, and do not follow a particular station order. my first thought was to use transparent command to draw line in profile view using station from plan view, but i have in excess of 100 cross sections, and that may be time consuming.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
Is there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I'm trying to make a part of different tubes by sweeping circles along lines. However one side of the part joins correctly, but other not. I'ill add photos of correct smooth join and uncorrencly unsmooth.
View 3 Replies View RelatedI don't use Photoshop for extensive stuff, I like to make graphics for Glitter-Graphics for fun. I can't find out how to make an image smaller. When I go to the top and click on layer and try to make it smaller, it disappears althogther. How does the crop tool work? Also after I hve one picture open, if I open another the first disappears, why?
View 9 Replies View RelatedI'm trying to take a face from one picture and put it onto a face on another picture as a layer but they're different sizes. I know to use the lasso tool to move the face over but how do I shrink it down to size?
View 3 Replies View RelatedI have been trying to make my avatar smaller then 8kb, but it just gets blurry. I have it set to 100 pixels by 100 pixels like the instructions say.
View 1 Replies View RelatedI am currently working on making a map out of a satellite image. I am stuck trying to figure out how to get text to be small enough to be legible. I have cropped and resized the original image, It is 137x224 @ 72ppi. I want the text smaller, I think I cant get enough definition because the pixels are huge, text size 7 and under becomes like 6 squares per letter and there is no definition.
The same effect is keeping me from getting well defined and sharp lines. I try to stroke a path and the line looks like a row of squares instead of a line.
I'm trying to make this picture's file size smaller. It's the startup page for my website that I'm making. The file size is somewhere around 130 kb, and it takes a while for it to load up for a website. Yes I've used Imageready, and that doesn't help a whole lot. I just want it to load up quicker, without losing a lot of quality. The website is for the Air Force, I'm joining as a pilot and am making a site documenting my growing up in an air force family, and my going in the Air Force myself.
View 5 Replies View RelatedI would like to make the dimension text smaller so that the information doesn't become so crowded. I notice that the dimensions are written like 12' - 10 3/4", with a space between the ' and the - and a space between the - and the 10, rather than 12'-10 3/4", like an old-fashioned person like me would write. Is there a way to control that? I looked into the dimension edit dialog box & couldn't see a way. AutoCAD writes them like I like.
View 3 Replies View RelatedI'm making a swatchbook (Pantone ® style), with a large 100% swatch and three smaller ones (5%,25% and 50% ink.). Right now I've got a 7x7 grid with all the swatches as I want (see screenshot), however the other 26 other pages only have the 100% swatch. Is there an 'automated' way I can make the smaller swatches in the 3 different percentages?
View 3 Replies View Relatedget a solution on compressing the pdf file which is created by illustrator.
The case is, i got a pdf file and then i am using illustrator to edit it and then save as pdf.
After that, i found that the pdf file size is quiet large. Someone know how to make the file become smaller but not using those compress software such as winzip and etc.
I am making an image smaller (from 1200 pixels wide to 700), and no matter what I try it always turns out pixelated. I hate it! I just want the size of the image to get smaller without compromising the quality of said image. Here's what I've tried:
- Saving to different formats before resizing (TIF, PNG, etc)
- Changing the X and Y resolution from 150, to 300, even 900 before resizing. It seems to have no effect.
- Changing the interpolation from cubic to the others (the others ones all look worse)
I am at a loss! I am using "image/scale image" to resize, by the way. And the original image was a 1200-wide TIF. I don't see why I'm not able to increase the number of pixels while making the image smaller to maintain the integrity of the original image.
This is what happens when I resize from large to small (in this case 600px to 60px).
View 2 Replies View RelatedCan't seem to figure out the correct style menu to access in order to turn the pink circles that represent (I believe) the station markers OFF when I go to view my corridors in object viewer or section editor...
View 1 Replies View RelatedI have a large amount of "ellipses" in a Civil 3D 2013 drawing that were created as "circles" in Cyclone 8.03 (the laser scanning software from Leica-Geosystems). I need to work with circles so I can label the diameter of each in my drawing. Is there a way to automatically convert these ellipses, that have the same exact minor and major axis, into circles? Other wise I will have to reapeat the work in Civil 3D using the same point cloud!
View 8 Replies View RelatedI have noticed since using c3d 2013 circle "markers" appearing at the curves on my alignments. I can't find the control to change / turn off?
View 1 Replies View RelatedHow to get these crop circles where two pipes join, from time to time? (See attached inside red rectangle.) The pipes are connected at the same elevation in a straight run, but we need a vertical bend there, and hence the Null Structure.
View 1 Replies View RelatedWhen using the oil brush, the color selector circle in the mixer palette is huge. Is there a way to make the selector circle smaller when using the oil brush The dropper at the center of the circle didn't show up in the screen grab.
View 4 Replies View Related
