I have 3 circles, randomly spaced. They will always be the same size. I want to resize them all about there centre points using just one parameter in the properties fly out. I've created individual linear/stretch for each circle, but I can't work out how to combine them.
AutoCAD 2012 Structural Detailing SP1 & Revit Structure 64bit
Win 7 64bit
I need to use the dimension created by an action-parameter as a variable in a user defined function but AutoCAD will not allow me (see attached).
How may I access the action-parameter's dimension ?
I've got a block with 2 lines of text, the second line being optional. If the second line is omitted, the first line should be moved down, so it's centered.
I can handle the second line being omitted with a visibility parameter. And I can handle the first line being moved down with a move parameter. But how can I link the two?
Ideally, I'd be able to re-use the line 1 attribute and display it in whichever place was correct, but that doesn't seem to be possible.
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
What is the variable to change the dynamic grip parameter size and color.
View 3 Replies View RelatedHow do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
Sure wish you could manipulate the Column Offset of an Array Action with a Stretch Action.
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
I am attaching a rotate parameter and action to a dynamic block.
I get the "Specify base point" bit okay but I can't figure out what "Specify radius of parameter" does.
Do I have to include or exclude other parameters like Flip or Stretch? I get some weird results when I rotate an object with other parameters.
Is it possible to place the Grip in a specific place? It always seems to like to sit on top of another parameter name.
I am looking to create a dynamic block that changes in scale, ex. If I have two (2) viewports in paper space, one 1/4"=1'-0" the other 1/8"=1'-0" I want my blocks to appear to be the same size in paper space.
Also, I would like my blocks to change attributes/features ex. If I have a "light switch block" I would like to have the option of switching the block from a 3-way switch, 4-way switch etc.
I've got a block that has a couple of rotation parameters. The main one works OK. But the secondary one that is incremental and only 180 doesn't. Everything looks OK but the objects don't rotate according to the parameter but 90 degrees from what I think it should.
View 2 Replies View RelatedI need a rectangle block which on insertion prompts me for some data (name/tag/item number) and then displays it (this I can do). This is al pretty straightforward. But I also want to be able to fill in width and height and then have the block stretch to the correct size. So basically what I think I need is to have the value of a parameter refer to the value of an attribute. I've gotten it to work the other way around, where the attribute displays the size of one side of the rectangle (after stretching and regenerating), but I'd really like to have it working the other way.
View 4 Replies View Relatedis it possible to have a label set to a parmeter so that after inserting a block I can see what each parameter is.
the label could just be there or show when the cursor is over the parameter symbol?
autocad 2007
windows 7
What I'm trying to do is have a graphic scale with a set list of scales the user can pick from. This was easy using the Visibility Parameter.
However, I want to add a "custom" vis state where, once they select this option, the attributed definition box will pop up and give them the option to input whatever scale they are using.Check out the attached .dwg to see what I've done so far (I just have the attributes on the "custom" vis state).
Is it possible to link a parameter value to a function? I want text or attributes to never be "upside down".
If it is rotated with a rotation parameter the text would need to be automatically flipped or rotated if the angle is less than say >3*PI / 4 and < 7*PI/8.
Any way to change the order that the parameter properties appear in the property manager. Currently I think they are appearing in the order in which I placed them, but I would likr to re-arrange them.
View 3 Replies View RelatedI have been trying unsuccessfully for several days to achieve a stable setup for the attached. This is the closest I have been able to get so far but as you can see if you change the width then the rotation parameter, the stability of the block very quickly breaks down.
The problem seems to be associated with the move action which determines the center point of the angle parameter. It seems to only work properly when you change the width parameter and the rotate handle is in the 180deg. Any other position of the angle parameter results in incorrect alignment of the geometry.
The "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedI am trying to create a block that has a stretch and array command, but I would also like to rotate each arrayed item indvidually. However I cannot select the rotate parameter as part of the array function, so the block end up only containing one rotate grip.
View 2 Replies View RelatedI've only got LT2008 at the moment, but this is a pet project that if my office upgrades me I want to finish.
Is it possible to rotate a line by using the length of a separate line? But the degrees of rotation need to be worked out by the length of the line
as in the following sum
angle of rotated line = (fixed number/360) * length of linear line
Left handed and PROUD
I am trying to be able to have my outreach arm stretch horizontally and on angles of 5 / 10 / 15 degrees from the pole. I have been able to make the polar stretch for this and it works fine though what i am trying to do is have the luminaire height also stretch and move when the size of the outreach changes (i can make the linear dimension work the way i want though not the luminaire parameter) as when you add the paremter into the stretch action is only moves the top and leaves the bottom at the same location which is not giving me the correct height.
The block itself is alot more complicated then this I have stripped most of the parameters out to make it less confusing but the end result would allow the user to input the outreach angle, outreach length and luminaire height. I have attached drawing for your reference.
I am very new to dynamic blocks. I am starting off learning the small stuff before I get to the larger more complex blocks to convert to dynamic.
I have a reference block I am trying to "master" all the functions we would like to see.
I have two major concerns.
1) Why can't I rotate this block (via rotate action) and have the attributes stay at angle zero? I thought I built the parameters and actions correct.
2) I haven't ran across anything that explains how to stretch 2 linear parameters at the same time with the same distance (ex: stretch both at .25, .5, .75)
how (if) I can set up my dynamic blocks so that I can set the parameter values as I insert the block, rather than with the grips afterwards?
To take a simple example; I have a block consisting of a rectangle, with 2 linear stretch parameters - length, width. Can I set it up so that when I insert the block, it asks for the length and breadth,just as it would for attributes.
I have a dynamic block that I am trying to add some pretty basic functionality to (at least it seems like it should be simple!). Since I’m still relatively new to DB’s, I figured I’d give some background on what I’m trying to do, cause maybe it could be done with a much easier approach than I have come up with. So if you don’t feel like reading the details, see the fourth paragraph for my actual question.
The block is a sheet reference annotation (that shows: SheetNum/TotalNumOfSheets) that we typical put in the notes section of our construction drawings. It looks nice when the text (which are attributes), lines up with the text in the note (usually Mtext, but sometimes a Mleader). So I constantly find myself completing the tedious task of placing the block at the insert point of the Mtext (which is always justified LEFT TOP), and then calculating the distance down to line that I want the block to line up with.
So what I want the block to be able to do is to be able to have the user grab the block by its basepoint, place it at the insert point of the Mtext object, and just enter the text height of the Mtext note, the line space factor, and the target line of the note that the sheet reference block should line up (the input would all be done via custom block properties in the Properties Palette). And since we almost always use a text height of 0.125 and Line Space factor of 1, those will be the defaults, and really the only thing that would need to be entered would be the line number of the Mtext that the annontation should line up with.
I already figured out most of the constraint parameters necessary and calculated the offset equation using custom parameters. I have all the linework moving correctly using the vertical constraint parameters, however, I cannot figure out how to get the Attributes to move along with the linework. I know how to move text and attributes using Action Parameters, but I can’t do it with Constraint Parameters. So I figured that maybe I could chain an Action Parameter to the Constraint Parameter, but I couldn’t figure out how to do this either. Also, I am using visibity states and would like the visibility grip to move along with everything else as well.
My block is attached. I used some lines for the Constraint Parameters to be associated with, but they are only there for the block to operate correctly, therefore they are invisible in both of the visiblity states. Probably not the best way, but it works.
I have a rather unusual problem. I'm using AutoCADLT2013. I have a dynamic block, with chained parameters. The block works perfectly, however, I'm expanding the contents, and trying to add more polylines to existing actions.
I have the following Actions showing: Stretch, Lookup, and Visibility. All of these actions are on unchained Parameters. The 2 Actions I'm missing are Arrays, both on chained Parameters with no Grips.
I've used ACTIONBAR on both Parameters (Show, then Hide, then Show again, I don't want to use Reset!), yet the Action Bars still won't show!
I've been messing for nigh on 2 hours and I can't figure it out. To make things worse, I can't use the Parameter Manager, due to it disappearing when in Block Editor.
I really don't want to have to start again, as it was a right pain in the rectum to get to work right.
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
i work at a small structural firm and am about the most experienced cad user here, which isn't saying much. I have never wrote any LISP's or anything, but have created many dynamic blocks and have edited some programing my boss got from a previous employee for adding dropdown menus with blocks/layers/etc. Just so you know my level of knowledge when it comes to answering my question. Also I am limited to using 2009 but other co-workers have up to 2013 so i would like this to work for all users. And i have done a bit of research but based on everyone elses level of knowledge am finding a lot of conflicting info and solutions that, to me, are in another language.
So I have a table that is created using polylines and text. It's a funky shape and AutoCAD's tables are a pain for it. i have created a dynamic block where i can array the rows down and the columns left. The issue is, i would like the test to come with each row, but still be editable once the block is done. I have figured out if row one is composed of 5 columns of text put into a single attribute, it is fine. But once you use the array action, to say 3 rows (including now 3 sets of attributes) they are not editable. So what is the work around, if there is indeed a work around?
the two option i see are to only array the rows and columns and left the text outside that block and manually copy it done to how ever many rows the user needs.... Or to have 2 blocks come in together, one as described before, and the other which just arrays the text and then i explode it to edit each line.. but then if you later choose to addd another line you would be left with doing that manually anyway..
I'm having an issue with the action bar locations. While I am creating the dynamic block, the actions all attach them selves to their respective parameters. The problem is that somehow at some time, the action bars change their mind and all lock down to the origin. All my action bars and icons are on top of each other. Is there a parameter to adjust to make the action bars move back to their parameters? Images are attached.
View 5 Replies View RelatedI would like to stretch my extruded shelf using a list of value settings.
I completed the steps in block edit but it will only allow my object to move to my value sets.
In 2D I have no issue.
What am I missing when modifying 3D objects.
See attached blocks.
I foolishly thought i'd sorted making hatch work within a dynamic block that requires user input to set length and width of block...the hatch would fill to the revised size when the user sets the length and width in the properties dialogue...woohoo. Off I go home from work having defeated the nemesis of the day.
Open up my drawing today and can I get the hatch to act as it did yesterday?
I built my block (a simple rectangle all told) added my parameters in block editor. length and width linear actions with 0 grips as I don't want stretching by grips. Added the stretch actions. Tested the block (without hatch)...working. Only then did I hatch, so into block editor and using associative, send to back, normal island detection and selecting the rectangle to hatch. tested block ...working. great. Inserted the block into new drawing...working.
Opened AutoCAD today...Not working...hatch remaining as original size
Tried building new block exactly as I did yesterday...no joy...
On a side note...it works if I leave grips on but only if I use the grips to activate the hatch (it still doesn't work by just typing into properties though) that's not going to cut it as I don't want to be telling everyone to wiggle the grips so to speak.