Any way to change the order that the parameter properties appear in the property manager. Currently I think they are appearing in the order in which I placed them, but I would likr to re-arrange them.
View 3 RepliesThe "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedI need to use the dimension created by an action-parameter as a variable in a user defined function but AutoCAD will not allow me (see attached).
How may I access the action-parameter's dimension ?
What is the variable to change the dynamic grip parameter size and color.
View 3 Replies View RelatedHow do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
I've got a block that has a couple of rotation parameters. The main one works OK. But the secondary one that is incremental and only 180 doesn't. Everything looks OK but the objects don't rotate according to the parameter but 90 degrees from what I think it should.
View 2 Replies View RelatedI need a rectangle block which on insertion prompts me for some data (name/tag/item number) and then displays it (this I can do). This is al pretty straightforward. But I also want to be able to fill in width and height and then have the block stretch to the correct size. So basically what I think I need is to have the value of a parameter refer to the value of an attribute. I've gotten it to work the other way around, where the attribute displays the size of one side of the rectangle (after stretching and regenerating), but I'd really like to have it working the other way.
View 4 Replies View Relatedis it possible to have a label set to a parmeter so that after inserting a block I can see what each parameter is.
the label could just be there or show when the cursor is over the parameter symbol?
autocad 2007
windows 7
What I'm trying to do is have a graphic scale with a set list of scales the user can pick from. This was easy using the Visibility Parameter.
However, I want to add a "custom" vis state where, once they select this option, the attributed definition box will pop up and give them the option to input whatever scale they are using.Check out the attached .dwg to see what I've done so far (I just have the attributes on the "custom" vis state).
Is it possible to link a parameter value to a function? I want text or attributes to never be "upside down".
If it is rotated with a rotation parameter the text would need to be automatically flipped or rotated if the angle is less than say >3*PI / 4 and < 7*PI/8.
I have been trying unsuccessfully for several days to achieve a stable setup for the attached. This is the closest I have been able to get so far but as you can see if you change the width then the rotation parameter, the stability of the block very quickly breaks down.
The problem seems to be associated with the move action which determines the center point of the angle parameter. It seems to only work properly when you change the width parameter and the rotate handle is in the 180deg. Any other position of the angle parameter results in incorrect alignment of the geometry.
I am trying to create a block that has a stretch and array command, but I would also like to rotate each arrayed item indvidually. However I cannot select the rotate parameter as part of the array function, so the block end up only containing one rotate grip.
View 2 Replies View RelatedI have 3 circles, randomly spaced. They will always be the same size. I want to resize them all about there centre points using just one parameter in the properties fly out. I've created individual linear/stretch for each circle, but I can't work out how to combine them.
AutoCAD 2012 Structural Detailing SP1 & Revit Structure 64bit
Win 7 64bit
I've only got LT2008 at the moment, but this is a pet project that if my office upgrades me I want to finish.
Is it possible to rotate a line by using the length of a separate line? But the degrees of rotation need to be worked out by the length of the line
as in the following sum
angle of rotated line = (fixed number/360) * length of linear line
Left handed and PROUD
I am trying to be able to have my outreach arm stretch horizontally and on angles of 5 / 10 / 15 degrees from the pole. I have been able to make the polar stretch for this and it works fine though what i am trying to do is have the luminaire height also stretch and move when the size of the outreach changes (i can make the linear dimension work the way i want though not the luminaire parameter) as when you add the paremter into the stretch action is only moves the top and leaves the bottom at the same location which is not giving me the correct height.
The block itself is alot more complicated then this I have stripped most of the parameters out to make it less confusing but the end result would allow the user to input the outreach angle, outreach length and luminaire height. I have attached drawing for your reference.
I am very new to dynamic blocks. I am starting off learning the small stuff before I get to the larger more complex blocks to convert to dynamic.
I have a reference block I am trying to "master" all the functions we would like to see.
I have two major concerns.
1) Why can't I rotate this block (via rotate action) and have the attributes stay at angle zero? I thought I built the parameters and actions correct.
2) I haven't ran across anything that explains how to stretch 2 linear parameters at the same time with the same distance (ex: stretch both at .25, .5, .75)
how (if) I can set up my dynamic blocks so that I can set the parameter values as I insert the block, rather than with the grips afterwards?
To take a simple example; I have a block consisting of a rectangle, with 2 linear stretch parameters - length, width. Can I set it up so that when I insert the block, it asks for the length and breadth,just as it would for attributes.
I have a dynamic block that I am trying to add some pretty basic functionality to (at least it seems like it should be simple!). Since I’m still relatively new to DB’s, I figured I’d give some background on what I’m trying to do, cause maybe it could be done with a much easier approach than I have come up with. So if you don’t feel like reading the details, see the fourth paragraph for my actual question.
The block is a sheet reference annotation (that shows: SheetNum/TotalNumOfSheets) that we typical put in the notes section of our construction drawings. It looks nice when the text (which are attributes), lines up with the text in the note (usually Mtext, but sometimes a Mleader). So I constantly find myself completing the tedious task of placing the block at the insert point of the Mtext (which is always justified LEFT TOP), and then calculating the distance down to line that I want the block to line up with.
So what I want the block to be able to do is to be able to have the user grab the block by its basepoint, place it at the insert point of the Mtext object, and just enter the text height of the Mtext note, the line space factor, and the target line of the note that the sheet reference block should line up (the input would all be done via custom block properties in the Properties Palette). And since we almost always use a text height of 0.125 and Line Space factor of 1, those will be the defaults, and really the only thing that would need to be entered would be the line number of the Mtext that the annontation should line up with.
I already figured out most of the constraint parameters necessary and calculated the offset equation using custom parameters. I have all the linework moving correctly using the vertical constraint parameters, however, I cannot figure out how to get the Attributes to move along with the linework. I know how to move text and attributes using Action Parameters, but I can’t do it with Constraint Parameters. So I figured that maybe I could chain an Action Parameter to the Constraint Parameter, but I couldn’t figure out how to do this either. Also, I am using visibity states and would like the visibility grip to move along with everything else as well.
My block is attached. I used some lines for the Constraint Parameters to be associated with, but they are only there for the block to operate correctly, therefore they are invisible in both of the visiblity states. Probably not the best way, but it works.
I've got a block with 2 lines of text, the second line being optional. If the second line is omitted, the first line should be moved down, so it's centered.
I can handle the second line being omitted with a visibility parameter. And I can handle the first line being moved down with a move parameter. But how can I link the two?
Ideally, I'd be able to re-use the line 1 attribute and display it in whichever place was correct, but that doesn't seem to be possible.
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
how can some of the attributes in the properties invisible
View 3 Replies View RelatedA simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies View RelatedDynamic block is for a title block which can be horizontal or vertical and a few different positions.
My lookup table controls the orientation and position of all the items including a number of attributes. But for two attributes I have allowed a grip on the Point Parameters so they can be dragged left/right if there is not enough room when the text is longer.
I can reposition the attributes but if I reposition twice then the Lookup table resets to its "Unmatched" configuration which I don't want. I believe I have to have an "unmatched" setting and "allow reverse lookup" and at the same time I want the user to be able to customize the position of these attributes.
Have dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).
Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.
Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?
Have attached what I have so far.
Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.
Is there a way to rearrange custom block properties in a DB?
View 9 Replies View RelatedI am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies View RelatedI am unsure weather to post this in Dyn Block technical or Fields as it comprises elements of both.
I am trying to get a field to return a 'lookup properties' value...
Actually, what I am trying to do is use a field to display either a + or a - depending upon upon the state of a flip parameter.
How I have been trying to achieve that is by using a lookup table to assign:
Input Properties.....Lookup Properties
Not flipped........=............+
Flipped.............=............-
Then I'm setting a Field to look at the Object 'Lookup Parameter' and return 'Lookup Action'.
The field then displays '#########' when testing the block.
When I return to edit the field it complains 'the object referenced y the field has been erased'. Both the table and parameter are still there, so I don't know what the problem is. Is there a better way of having a field return a specific value based upon a parameter state?
What I'm interested in is finding a method of connecting several properties from several Autocad drawings to a single table. I would create several custom properties in each drawing and use some of them to fill the boxes in the drawing itself (already implemented) and some of them to fill the table which could later be printed or used in some other manner (maybe even combined with an ERP software interface). Some of the properties would be used both in the drawing and in the table. What I would really like to achieve is to be able to change the property values in the drawings by changing the values in the table and vice versa.
I know how to do it for one of the drawings but I don't know if it's possible to connect several? It doesn't have to be custom properties, it can also be a table in each of the drawing if it's easier to connect with a central table that way. I suppose the best way to gather all the drawings in one place would be to use Sheet Set Manager. A bit of a problem with the sheet set manager is that we have 5 layers set up for each of the drawings and I would like to import only one of them into the sheet set. The thing is picking them by hand would take time and that's the thing I wanted to avoid in the first place. Is there maybe an option to use only import the last active layer into the sheet set?
I work for a company that makes sheet metal cabinets. Each cabinet we construct has 17 parts that all different different blank sizes and notching. I have a template for each part right now that I have to shrink or stretch to the appropriate size every time we get a custom size order.
What I've created so far is an excel spreadsheet that determines the sizes of all the parts based on the overall height width and depth of the custom cabinet that was ordered. Any way to define a parts properties with a dynamic block and get the width depth or height imported in from the excel spreadsheet to automatically adjust the size.
[URL]
After spending a lot of time creating a particular dynamic block, I realized that the order of custom properties of this block as shown in the Properties Palette is not organized in an optimal order.
For example I have "Cabinet Width" at the top of the custom properties list, and "Cabinet Height" way down near the bottom. This is going to make my Cad operators hunt around too much for the property they need to adjust.
The apparent order is by creation - first created custom property is listed first, last created is shown last. I really don't want to remake this dynamic block just to get the properties in a logical order.
I was wondering if it is possible to reorder the custom properties as shown in the properties palette?