I'm trying to take a face from one picture and put it onto a face on another picture as a layer but they're different sizes. I know to use the lasso tool to move the face over but how do I shrink it down to size?
View 3 Replieshow I could create one of those images that uses hundreds of images to create one image using the colors in each picture to take the color of the area it is representing in the big picture. I know there is a word for this type of picture, but can't think of it.
View 3 Replies View RelatedI am new to Adobe and I can not figure out if you can resize to email the picture smaller?
View 4 Replies View RelatedI want to resize an image without loosing picture quality but I'm not making it larger - I'm making it smaller. For example, there are small stars in the background which seem get deleted when I resize it.
But here's the thing - After resizing it (but before "confirming" my changes), it looks perfect. Then I hit enter and then it deletes certain details. Basically I can look at the image at the size and quality I want in PS but I can't save it that way. And it's not a matter of saving it with a higher quality level, it happens as soon as I resize. WTF?
I have Paint Shop Pro PHOTO XI. I want to shrink a photograph so when it's printed on a standard 6x4 print the picture only takes up a part of the print. Is this possible? If so, how do I go about it?
View 4 Replies View RelatedI don't use Photoshop for extensive stuff, I like to make graphics for Glitter-Graphics for fun. I can't find out how to make an image smaller. When I go to the top and click on layer and try to make it smaller, it disappears althogther. How does the crop tool work? Also after I hve one picture open, if I open another the first disappears, why?
View 9 Replies View RelatedI have been trying to make my avatar smaller then 8kb, but it just gets blurry. I have it set to 100 pixels by 100 pixels like the instructions say.
View 1 Replies View RelatedI'm trying to make this picture's file size smaller. It's the startup page for my website that I'm making. The file size is somewhere around 130 kb, and it takes a while for it to load up for a website. Yes I've used Imageready, and that doesn't help a whole lot. I just want it to load up quicker, without losing a lot of quality. The website is for the Air Force, I'm joining as a pilot and am making a site documenting my growing up in an air force family, and my going in the Air Force myself.
View 5 Replies View Relatedget a solution on compressing the pdf file which is created by illustrator.
The case is, i got a pdf file and then i am using illustrator to edit it and then save as pdf.
After that, i found that the pdf file size is quiet large. Someone know how to make the file become smaller but not using those compress software such as winzip and etc.
I am currently working on making a map out of a satellite image. I am stuck trying to figure out how to get text to be small enough to be legible. I have cropped and resized the original image, It is 137x224 @ 72ppi. I want the text smaller, I think I cant get enough definition because the pixels are huge, text size 7 and under becomes like 6 squares per letter and there is no definition.
The same effect is keeping me from getting well defined and sharp lines. I try to stroke a path and the line looks like a row of squares instead of a line.
I would like to make the dimension text smaller so that the information doesn't become so crowded. I notice that the dimensions are written like 12' - 10 3/4", with a space between the ' and the - and a space between the - and the 10, rather than 12'-10 3/4", like an old-fashioned person like me would write. Is there a way to control that? I looked into the dimension edit dialog box & couldn't see a way. AutoCAD writes them like I like.
View 3 Replies View RelatedI've downloaded a DEM and made a surface from it creating a HUGE file. I only need about an eighth of that area. How can I crop the surface to be a smaller area? I realize I can create a boundary, but I really don't need all the data outside the boundary.... I want a smaller file so it doesn't have to create one of those *.mms files.
Surely I don't have to export the boundaried area as triangles to a regular ACAD file, then make a surface from those triangles... do I? Not that it's that big of a hassle, but seems like a roundabout way of doing things.
I'm making a swatchbook (Pantone ® style), with a large 100% swatch and three smaller ones (5%,25% and 50% ink.). Right now I've got a 7x7 grid with all the swatches as I want (see screenshot), however the other 26 other pages only have the 100% swatch. Is there an 'automated' way I can make the smaller swatches in the 3 different percentages?
View 3 Replies View RelatedHow can one make a survey file smaller? The current file is 11 mb with survey figures and cogo points. It takes too long to load versus simple cad. How can I speed it up?
When I exported to autocad, first it crashed, then the annotation ability seemed to be missing and the points scaled/disappearred.
Or is this how it is...
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I am making an image smaller (from 1200 pixels wide to 700), and no matter what I try it always turns out pixelated. I hate it! I just want the size of the image to get smaller without compromising the quality of said image. Here's what I've tried:
- Saving to different formats before resizing (TIF, PNG, etc)
- Changing the X and Y resolution from 150, to 300, even 900 before resizing. It seems to have no effect.
- Changing the interpolation from cubic to the others (the others ones all look worse)
I am at a loss! I am using "image/scale image" to resize, by the way. And the original image was a 1200-wide TIF. I don't see why I'm not able to increase the number of pixels while making the image smaller to maintain the integrity of the original image.
This is what happens when I resize from large to small (in this case 600px to 60px).
View 2 Replies View RelatedI am pretty new to Photoshop and I have come across a few things that I would love to do but I cant figure out how to do them. Also, I have elements so I'm not even sure if I can do them. Anyway one of the things I am trying to learn is how to put lines over an image. For example the very first picture on this site: ...
View 1 Replies View RelatedWhen using the oil brush, the color selector circle in the mixer palette is huge. Is there a way to make the selector circle smaller when using the oil brush The dropper at the center of the circle didn't show up in the screen grab.
View 4 Replies View Relatedhow to make my edited mp4 video files smaller so that They upload and download much quicker. I did some editing to some MPEG-4 video files and when I was finished I found out that the file sizes of each video blew up to huge numbers. During the editing I did add some transitions and .MPEG photo images. I didn't think that the video size would grow to that amount. I really would like to keep the MPEG-4 format for the convenience to the viewer. I just need to have it in the smallest file size possible. how I can get my "MP4 H264 - MPEG-4 AVC Resolution 640x480" videos to an acceptable file size?
View 8 Replies View Relatedhow to make the circles on my parameter locations smaller? What controls this feature?
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
Is there a way to make a smaller grid size on a 16x16 block than 16x16 grid ??
View 1 Replies View RelatedWhat I want to do, is take the path tool, make a pattern around a picture (which is rectangle) placing it on a picture of a board like this...and then pull the picture horizontally, and vertically, to make it circular, to fit the perimeter of the board. If I understand it correctly, when you use the path tool...it allows you to make an image round (from rectangular) is that true?
View 1 Replies View RelatedI have a huge file that I am working with. I keep getting fatal errors. I am trying to make the file size smaller. Within the file there are 1836 layers, I am trying to reduce that number greatly. There are also lots and lots of blocks. I have heard that it is possible to make all of the objects on one layer and also compress layers.
View 9 Replies View RelatedI have xref-ed two .dwg files into my drawing. They are on top of each other, and now I want to make horizontal sections from several smaller areas containing both files. However, when I do, all lines turn olive green and I loose the original layer structure (in the section, that is, not the original x-ref).
Is there a way to make these sections and keep the original layers in the sections? I'd rather not use xclip.
How to make the dimension get bigger and smaller as we “scale” the drawing?
For example, the drawing in the screenshot below is scaled by 0.5 but that didn’t affect the “size” of the dimension (height of the text, extension lines, …).
Is there a way to get the dimension line affected as we scale the drawing such that the “dimension text” and the “extension line” are increased/ decreased with the scale factor?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How does this person make picture 2, I want to know how he has edited it? I have spoken to my photographer and he thinks he has used a photoshop tool.
Please I really want to know, I can take the base picture easy but need to get the picture 2 "finish"
I have included 2 pictures, My picture is number 1 and picture 2 below is the one I am trying to look like, can you try and edit my picture 1 image to see if you can match picture 2?
I used a light box to take picture 1
I have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies View RelatedI have a picture, and I would like to make it look like if it was an old picture. I added a sepia layer, but it still looks like a new picture. What else can I do in order to make it look like a real old picture?
View 5 Replies View RelatedI want to make a picture that I'm going to put on a t-shirt for a friend. What I want is to Photoshop the heads of the first two pictures onto the two chickens in the third picture. Also, I want you to add an S written ahead of "HERMANOS" so that it reads "SHERMANOS".
View 2 Replies View Relatedbetter version of a gag picture I just made on PowerPoint.
I always tell my sister her dog looks like a croissant when she is curled up in her bed, so I tried to insert a picture I took yesterday onto a stock picture of some croissants.
How do I make a circular picture with Photoshop?
View 2 Replies View Related