AutoCad :: How To Update Tool Images
Sep 30, 2008
I am going through our block library one block at a time (electrical, fire alarm, intercom, low voltage symbols). I have to scale most of them to be 1=1 rather than 10=1, change the default text style, and make sure I've got consistent sizes.
A problem I've noticed on our tool palette that I insert from is, some of the tool images are so small that you don't see what they are, you have to go by the name.
When / how is this image created? I've tried to zoom extents on the file it's self, save it, then use "update tool image" on the pallet.
View 9 Replies
ADVERTISEMENT
Jul 8, 2013
On two occasions now since last software update, when I open Autocad LT 2013, my tool bars are all gone. I use a customized layout/workspace based off the original/classic layout option. When I change layout to drafting/annotation, toolbars for that layout appear, but when I switch back to my saved layout, all tool bars are still gone and I have to go through whole process of adding the ones I want again.
View 2 Replies
View Related
Jun 25, 2006
Is there any sort of "Live Update" tool that Comes w/ Inventor 10 series? I have been to the "downloads" page at Autodesk site for Inventor 10, and have already installed sp3a, and a couple of the hotfixes (1054780 & 1057155) - I was trying to follow the dates and hotfix numbers in an effort to bring my product completely up to date, but now Inventor does not seem to be working correctly - I suspect that I did something in the wrong order. How can I know that my product is completely up-to-date, and is it possible to get a sequential list of SP's and Hotfixes so I know what order I'm supposed to install? I have also tried "repair" from the installation disk, but after "gathering all required information", nothing happens.
View 3 Replies
View Related
Mar 31, 2014
I use lightroom to order and do small edits to photos. Alot of the time I will batch a set of photos through a couple actions (photoshop) before I start with lightroom.My problem arises when I (more often than not my colleuge) will start working with the wrong source pictures (either scaled down size or not batched yet). So i've got a collection with all the wrong sized photos as source. So my question is if i replace the picture withe the proper resolution files which are named the same is there a way i can force lighroom to "relink" with the high res versions? I tried deleting the source files with the hope that lightroom would ask me to relink them but it didn't.
View 3 Replies
View Related
Mar 10, 2012
The first thing I noticed was that I could not use the type tool to create 'live' text on a layer. With the type tool selected I get the following error message when clicking to begin typing:
"Could not complete your request because of a programme error."
I quit Photoshop then attempted to launch the application by opening the file. The application opened but the file wouldn't, giving the same error message.
I quite Photoshop again and relaunched the application from the Dock. The applicatiuion opens fine but displays the same error message (before I have attempted to open a file).
With a file open I checked the type palette, where the dafault typeface is shown as Myriad Pro, but the default settings are:
Type size: 1pt
Linefeed (leading): 1pt
Kerning: 1
Tracking 1
Type height: 0%
Type width: 0%
Baseline shift: 0
Colour: black
Language: multiple
Type quality: none
Some odd settings there. The type tool bar (at the top of my display) has blank fields. Typing desired values into any of these fields doesn’t resolver the issue.I have tried restarting, creating a new file but to no avail. The type tools in Illustrator and InDesign are working as expected, so it would appear to be a Photoshop problem and I’m stumped ..
I’m running CS5.5 (Photoshop 12.1) on a Macbook Pro 2.5Ghz Core i7 with 8Gb RAM
View 4 Replies
View Related
Sep 9, 2012
During an attempt to align a set of three images in a stack, photoshop crashed with the usual (for me) ati.dll indicated in the Event Viewer. The nice thing about it is after I restarted PS the project was restored, minus the base layer, a transparent layer large enough to allow manual alignment. (Auto Align didn't work in Stacks.)
So crashing continues.
CS6 fully updated
Win 7 Ultimate.
View 2 Replies
View Related
Dec 17, 2012
A few days ago I updated Lightroom to version 4.3. Since then, the "auto save to xmp" doesn't work. It is checked, but I keep finding files that "have been changed recently". So not only that it's not auto-saving them, but it is also finding "new images" that "have been recently changed" even though I didn't open or edited them in the past several months..
View 8 Replies
View Related
Sep 21, 2013
After the OS X 10.8.5 update on my current generation 27' iMac moving 1:1 images results in very low resolution for those areas I am moving to with as long as a two second delay before the image snaps back into full resolution. Not only that but when it snaps back into full resolution you see a shift in alignment and a snapping into place with the nearby area that was already in full resolution. This is awful and is occuring with Lightroom 5 and 5.2.
My iMacs specs are the current generation 27" iMac, i7 3.4 Ghz, 32GB RAM, and the NVIDIA GeForce GTX 680MX 2GB running OS X 10.8.5.
I did not have this issue with OS X 10.8.3.
View 1 Replies
View Related
Jan 1, 2013
Is there a quick way to replace/update images in Edge animate? It was simple to do in Flash but I haven't seen the same function in Edge.
View 4 Replies
View Related
Sep 26, 2013
My MacBook Pro had been able to use the Rotate Canvas feature in the earlier release of Photoshop CC I downloaded in July, 2013. With the update in September, this feature has stopped working and it no longer detects my video card. True, I don't have 512 Megs of Video memory. And I have tried to install updated NVidia drivers for my computer... but even it refuses to update. My computer has 2 video cards depending on power settings.
OS X 10.6.8
NVIDIA GeForce 9400M (when in energy savings mode)
NVIDIA GeForce 9600M GT (normal and usually the display driver I use)
I can not accept that rotate canvas does not work because of my video card or my lack of video card memory. Both Maya and ZBrush are able to handle this operation using software rendered modes. Maya is also able to use my hardware using Viewport 2.0.
View 1 Replies
View Related
Oct 13, 2012
The management of the importation of externally linked images still has the problem in previous versions.
1) You can't import more than one picture at a time, externally connected simultaneously in the document.
2) If you move the picture within it, in a new folder, there is the possibility of assigning the new path to more 'photos at the same time but only one at a time.
So if I have 100 photos to be updated with the new path I have to do with each photo. While it would be much more logical to assign the same path to more 'selected photos.
View 4 Replies
View Related
Dec 9, 2013
I made a change to my materials library. I changed the color (from dark grey to light grey) of one material. I then saved this back to my library.
Now, when I start a new part, I get a warning that the material does not match the library. So, rather than using the material in the part, I opened the template and updated the material to match the library. (Manage >Update Styles).
This is where the problems come into play. In the update styles dialog, if I compare materials against my custom materials and then compare it to my Favorites, it just a continuious circle. It is like the favorites are stored inside the part and do not get updated to match the custom materials library. (I thought the whole idea behind using a library was to get the information out of the parts).
Here is a short video showing what it does. [URL] .....
The only way I can get the favorites to match is to delete the favorite material, update the style and the add the favorite back in. That is a bunch of work. The problem I got with this is that there are thousands of parts that have been created that has this favorite in it. The only way to update these is to open each part (if I knew which one), delete the favorite, update the materials and then add the favorite back in.
I see the same thing in 2013 and 2014.
View 3 Replies
View Related
Nov 26, 2012
How can i Have bom With Image From Inventor 2013?
View 1 Replies
View Related
Feb 1, 2013
I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem with my bambo tablet.I've used this tablet for 3-4 years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.
My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.
View 1 Replies
View Related
May 2, 2012
I have just updated a whole load of block symbols as some numpty didn't put them on layer 0. When i have created a tool palette of the symbols, 4 of approx 30 symbols have got such a tiny tool image, that its impossible to see them, but oddly the rest are fine.
I have checked the blocks are zoomed to extents, checked the drawing limits are the same ones that are okay, and checked that the size of the block is the same, effectively i can not see any difference between the blocks. Even when i increase the image size to max in the tool palette view options the symbol is to small to identify. Oddly in windows explorer and in ACAD design center there is no issue with the tool image size.
Whilst i could manually create a new image, and tell the tool palette to use it, if this happens with all the blocks, it could be time consuming, when there could be a very simple answer i have over looked.
View 7 Replies
View Related
Mar 6, 2008
In LT2008. Dragging blocks (individual files) from ADC to tool palette. Some of the images are unreadable, just a dot or two. The drawing files are saved with the image filling the screen. Changing the size of the image in the tool palette does not work. I have tried plotting to .jpg and .png, the images are grayed. What is the best way to make a nice image for the tool palette to display at a medium size?
View 7 Replies
View Related
Jun 12, 2013
I just loaded 2014 onto a new computer and poof every custom toolbar has a question mark. Yet the image displays on the preview in the cui.
All of my button images are in a folder on my C: drive and that path is in the support file search path.
I went to one of the buttons and click on the small and large image and browsed to the folder with the BMP files and clicked it for both small and large.. And when I clicked 'ok' everything started to display correctly.
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
View 2 Replies
View Related
Aug 20, 2013
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
View 3 Replies
View Related
Nov 21, 2013
I am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
View 5 Replies
View Related
Mar 29, 2013
i installed the update update x3, but corel open at the start a window "Problem at the Download Update2.exe". Although at ending corel.
View 3 Replies
View Related
Feb 20, 2013
i just noticed that there is no manual update file for ACR 7.2. most of our company computers are offline.
how should we update them without a manual update file?
[URL]..........
adobes says the final ACR 7.2 update is available through the CS6 update.well that is of no use when you have offline computers. This update will be released as manual update file too?! any infos?
View 16 Replies
View Related
Sep 29, 2012
I get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
View 5 Replies
View Related
Sep 21, 2013
When transfering images from Lightroom to Photoshop HDR for instance. message says update Camera Raw. Update attempts all come back to 'update server is not in service' --
View 1 Replies
View Related
Sep 29, 2013
Whenever I try to use a selection tool my image starts to flash from a blank screen back to the image and i can't do anything after that point unless I undo the selection.
View 1 Replies
View Related
May 22, 2005
way to remove images from their backgrounds.
Which works best for you? Pen tool, Extract Tool or plugin?
View 9 Replies
View Related
Jul 13, 2013
Im giving an example with a random picture.
[URL]
Im trying to be abled to twirl the picture not the entire frame.
View 4 Replies
View Related
Mar 27, 2008
When I try to crop an image using photoshop the crop tool will only allow a square image, it will not let me have one side longer than the other. I've tried to just use the tool once the box is highlighted to adjust the position of one or more sides but it will only allow me to do this at the corners, once again resulting in a square even though it is a rectangle I want.
View 3 Replies
View Related
Sep 11, 2004
recently in photoshop i have been designing web layouts and theres one thing i need help on. I was wondering if anyone could post a good slicing tutorial that clearly explains how you can the html contents to your site, for expample once you've made a content box, how then do i slice it so that i can add text inside the box and the box can also get bigger the more text that is added. Any help with this will be appreciated . Also one little problem i seem to be having is that when i use the fill tool and fill inside a cut out (marching ants) it always overlaps the edges of the lines and looks like its been blurred,anyone know why this happens?
View 1 Replies
View Related
Sep 18, 2012
How do I reset photoshop to its original condition. The cloning tool does not copy the correct images.
View 1 Replies
View Related
Nov 2, 2005
I'm trying to blend a couple of images together using the gradient tool.
I moved one image to the other using the move tool, I then added Layer Mask (in the layers palette), i then got my gradient tool and selected black,white.....I used the gradient tool on the left side of the image and it blended beautifully.
So, now that the left side is blended nicely, I attempt to blend the right side. The right side blends very nice.....but my left side went back to where it was originally.
How do I blend multiple sides of the image?
View 9 Replies
View Related
Nov 21, 2013
I have never used the slice tool. Well i load an image jpb
I select the slice tool and i create 3 slice box. How can i cut , trim in short have 3 image of these 3 slices?
In short i want to grab from image 3 sices and create 3 new images ,based on my slices. Can i do it?
View 2 Replies
View Related
