AutoCad :: Why Tool Palette Images Are Small
May 2, 2012
I have just updated a whole load of block symbols as some numpty didn't put them on layer 0. When i have created a tool palette of the symbols, 4 of approx 30 symbols have got such a tiny tool image, that its impossible to see them, but oddly the rest are fine.
I have checked the blocks are zoomed to extents, checked the drawing limits are the same ones that are okay, and checked that the size of the block is the same, effectively i can not see any difference between the blocks. Even when i increase the image size to max in the tool palette view options the symbol is to small to identify. Oddly in windows explorer and in ACAD design center there is no issue with the tool image size.
Whilst i could manually create a new image, and tell the tool palette to use it, if this happens with all the blocks, it could be time consuming, when there could be a very simple answer i have over looked.
View 7 Replies
ADVERTISEMENT
Mar 6, 2008
In LT2008. Dragging blocks (individual files) from ADC to tool palette. Some of the images are unreadable, just a dot or two. The drawing files are saved with the image filling the screen. Changing the size of the image in the tool palette does not work. I have tried plotting to .jpg and .png, the images are grayed. What is the best way to make a nice image for the tool palette to display at a medium size?
View 7 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
Jun 9, 2011
In ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
View 1 Replies
View Related
May 2, 2012
I have released a new tool for ACAD users and it would be great if I could find some beta testers. so what about you? 3D Injector is a stand alone application designed to create 3D Drawings from small images. Once the image is selected, the program will inject the necessary code into the ACAD command line to create a 3D mesh based on this image. Every pixel on the image is converted into a 3D point where the Z coordinate is elevated according to the pixel luminosity. URL....
View 7 Replies
View Related
Mar 9, 2006
I'm trying to create a Tool Palette for Autocad 2000 from VB.Net.
View 5 Replies
View Related
Sep 18, 2013
My question has to do with the Annotation Tool Palette out-of-the-box. For a given scale, the Call out bubble circle and text is a different size from the Section call out. See attached image.
View 2 Replies
View Related
Nov 29, 2011
How to the fix the little buttons (icons) on the tool palette(s)?
Sometimes, by mistake, I drag an (or many) icon(s) to another place. I work with autocad 2010.
View 6 Replies
View Related
Apr 9, 2013
I am using AutoCAD 2011. Because when I typically draw a circle I use the center, diameter style to create a circle. The factory default is Center, Radius. I would like to make the center, diameter my default setting whenever I chose to draw a circle. I would like to know how to make that change then how do I get it onto a custom tool palette?
View 5 Replies
View Related
Aug 8, 2013
I am trying to add a block to my tool palette. I am able to add it, but when I click on the palette to add it to a drawing, it acts like it's going to work but nothing shows up in the drawing. I have added it to the source drawing, saved the source drawing, dragged it into the palette. All is well until I try to place it in a drawing. The other blocks work fine.
View 9 Replies
View Related
Mar 6, 2013
Is there a way to create more than one tool palette in AutoCAD instead of just adding tabs onto an existing tool palette?
View 1 Replies
View Related
May 11, 2011
I heard tool palettes are easy to create and use? I am being able to drop in doors and windows into plans. Is there an easy way to create these tool palettes?
View 2 Replies
View Related
Jan 16, 2012
We use autocad 2011 and we are trying to create a new tool palette. We have no problem dragging and dropping to our existing tool palettes, but we can not drop to anything new we create. We do not have any read/write issues. I have tried saving workspace, restarting CAD just erases the palette i tried to create.
View 2 Replies
View Related
Dec 7, 2011
Is there any option to load the dll on every drawing opened, like vba macro is loaded in start up suite. or is there any possibility to open a tool palette on every drawing opened.
View 2 Replies
View Related
May 20, 2013
I am using autocad lt 2014 and have some multi leaders on a tool palette that work fine but if I hit enter or right click for enter the multi leader will use what ever leader is set from the multi leader style that is set on the multi leader style control, but only the leader will come in wrong the text will come in correct.
View 6 Replies
View Related
Nov 12, 2012
I want to create a new Tool Palette Group. How can I do?
View 6 Replies
View Related
May 1, 2013
Quite often when I open drawings or just open AutoCAD my tool palete is there but none of the tools are there to select from? If I reset the tool palette it does the same. Sometimes they are there and sometimes they are not?? I have tried uninstalling and reinstalling but it still happens. I'm using AutoCAD LT 2013 for Mac. Screen shot attached.
View 1 Replies
View Related
Aug 20, 2013
I have created one drawing with 10 Layouts in different formats(A1,A0...etc) and with different Legends on it. I need to give these layouts to lot of users, where everyone uses one layout out of 10 in their drawing. Is there any way to add them in tool palette like dynamic blocks? or is it possible to add thme as a ribbon in the dwg template?
View 3 Replies
View Related
Mar 24, 2013
I am trying to create a pallette , where I can use routinely used small symbols(saved as drawings) for insertion into a drawing.
I've created a pallette but unsure how to get my symbols into the pallette.
View 3 Replies
View Related
Aug 13, 2013
I have just installed AutoCAD 2014 with our company update and I am having problems using our tool palettes.
When I click the buttons on the palette to load our blocks I get the message below:cad2014 tool palette error.png
I've checked the directorys of the tool palettes and they are routing to the correct location.
View 7 Replies
View Related
Mar 16, 2012
Friend Shared
m_ps As Autodesk.AutoCAD.Windows.PaletteSet = Nothing If m_ps Is Nothing Then m_ps = New Autodesk.AutoCAD.Windows.PaletteSet("Test") Dim myPalette As EPSSN = New Test() m_ps.Add("Test", myPalette) m_ps.Size = New Drawing.Size(354, 591) m_ps.Visible = True end if
In my tool palette is have some controls. In some systems entire palette is visible completely, but in some systems, the bottom controls in the palette are not visible where the system settings are different. Is there any option to display scroll bar in the tool palette automatically?
View 1 Replies
View Related
Sep 20, 2013
It seems unlike previous PC's, when i sart up AutoCAD my new set up reverts the location of the tool palletes to open center to my screen 1 even after i have positioned it on screen two.
I understand the tool palette should hold its location in the position i last placed it.. in screen two. as do you toolbars....
Why does the tool palette keep reverting back the center location on my screen, not where it was placed
View 6 Replies
View Related
Dec 17, 2010
I have created a tool palette with all the blocks that I use on a daily basis. The only thing is that now when I put my cursor on the palette I have no icons just words. When I adjust the size to the palette my icons appear.
My view option is set to text and icons.
View 4 Replies
View Related
Sep 26, 2011
Why do my attributes shift when I drop my blocks into my tool palette? They are center justified but still end up shifted to the left. attshift.png
View 1 Replies
View Related
Oct 15, 2012
im using the tool palette, i want to assaign a keystroke to the tools i place there. how to do it?
View 9 Replies
View Related
May 18, 2011
Can I copy my tool palette to another computer or do I have to copy all of my blocks into design center and re-create the tool palette? ACAD 2006
View 5 Replies
View Related
Feb 6, 2012
I have created a custom office standards tool palette for the users, and it is properly loaded on all the machines. The issue is that when the 'Tools' button on the ribbon is pressed, it loads to the 'design tools' palette by default. Most user here have the habit of closing the tool menu after use, and reopening it from the menu - which defaults back to the design tools palette instead of the office standards... which is frustrating when jumping back and forth constantly. I assumed there was an easy way to tell them to set the 'standards' as the default, but I can't seem to find this property anywhere.
View 0 Replies
View Related
May 31, 2013
I recently got a new drafting job for a chemical plant. The issue that I am having is that they are using AutoCAD 2004. That version came out when I was a freshman in high school and I am lost. I am trying to insert the custom blocks that pertain to our design standards, but I am getting nowhere.
I have the blocks in a separate folder. I am getting to the customize tool palette option, but every time I try and import these files the folders show up empty. Admittedly, I am not the greatest with the complexities of AutoCAD because I picked it up on the job and never had any "official" training; however, it has also been two years since I've had to do this and I am a little rusty... I'd like to think it's just that because they are using decade old software.
View 9 Replies
View Related
Nov 12, 2013
I use LDD04. Usually when I want to combine 2 or more tool palettes and create one with tools I mostly use,I have all the palettes open,then I r-click on one tool palette I want to change, then go to customize and drag and drop tools I need from other palettes into the one customizing. This didn't work this time, now when I go over one tool with the mouse, it shows different name for it, so the icon and function is messed up. I also am missing the icons of those tools I added to the palette. When I'm going back to the palette where I grabbed on tool from, it's not there anymore. How can I restore tool palettes to their original form and how can I create a palette with only tools I want?
View 3 Replies
View Related
Oct 16, 2013
Just upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
View 2 Replies
View Related
