I have just installed AutoCAD 2014 with our company update and I am having problems using our tool palettes.
When I click the buttons on the palette to load our blocks I get the message below:cad2014 tool palette error.png
I've checked the directorys of the tool palettes and they are routing to the correct location.
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies View RelatedI wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies View RelatedI just upgraded to ACAD Mech 2014 from 2011. When I import my palettes and try to use them, the program crashes every time (fatal error and send report to Autodesk).Think I'll have to rebuild the palettes in 2014 for them to work?
View 1 Replies View RelatedI'm having a problem with 2014 version. Property palette doesn't show the property of any object. It shows blank and same thing with quick select as well.
View 8 Replies View RelatedIn ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
It's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies View RelatedI have just load and reloaded 2014 LT upgrade and I am getting 0xc00007b error message. I am running win 7 Pro 64 bit.
I notice this is a common error with Autodesk products?
My pc is being upgraded next week (while I am away on holiday). The IT guy will be adding 4GB of RAM and will be switching from 32bit win 7 pro to 64bit win 7 pro, obviously, this will mean a clean install and re-installing all my software. I have my tool palettes set up with many blocks, leaders, hatch patterns etc and I want to know if there is a way I can save my tool palettes and then reload them onto the upgraded pc with the re-installed AutoCAD LT?
View 5 Replies View RelatedI'm trying to create a Tool Palette for Autocad 2000 from VB.Net.
View 5 Replies View RelatedMy question has to do with the Annotation Tool Palette out-of-the-box. For a given scale, the Call out bubble circle and text is a different size from the Section call out. See attached image.
View 2 Replies View RelatedHow to the fix the little buttons (icons) on the tool palette(s)?
Sometimes, by mistake, I drag an (or many) icon(s) to another place. I work with autocad 2010.
I am using AutoCAD 2011. Because when I typically draw a circle I use the center, diameter style to create a circle. The factory default is Center, Radius. I would like to make the center, diameter my default setting whenever I chose to draw a circle. I would like to know how to make that change then how do I get it onto a custom tool palette?
View 5 Replies View RelatedI am trying to add a block to my tool palette. I am able to add it, but when I click on the palette to add it to a drawing, it acts like it's going to work but nothing shows up in the drawing. I have added it to the source drawing, saved the source drawing, dragged it into the palette. All is well until I try to place it in a drawing. The other blocks work fine.
View 9 Replies View RelatedIs there a way to create more than one tool palette in AutoCAD instead of just adding tabs onto an existing tool palette?
View 1 Replies View RelatedI heard tool palettes are easy to create and use? I am being able to drop in doors and windows into plans. Is there an easy way to create these tool palettes?
View 2 Replies View RelatedWe are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
I just installed an educational version of Autocad 2014 for school and am encountering some major problems. The program works fine at first, but after I close it and reopen the application it starts to bug out. If I try to ask my layers after I reopen the program, Unhandled exception has occurred in a component in your application.
If I close the program and try to reopen, the opening screen gives me the same error message. I've installed and reinstalled the programs multiple times over the server, but still no difference.
Installed Product desgin suite 2014. I can create a new inventor dwg file and place a base view of an assembly into it. I then attempt to check it in and it causes Inventor to not respond and eventually crash. When I reopen the dwg from my working folder and attempt to check it in again it gives me an error saying that the file already exists.
View 1 Replies View Relatedwhenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
I'm using the 30 day trial and when I run AutoCAD 2014 I get a FATAL ERROR: Unhandled Access Violation Reading 0x0008 Exception at ad314c65h message
View 1 Replies View RelatedEverytime AutoCAD 2014 shuts down I get a fatal error with the d3b42920h. It doesn't seem to be the drawing that is erroring because it doesn't ask for a recovery file to be saved, but the program it'self.
When SDI is set to 1 everytime you open a new drawing the error occurs.
We do have a company wide network deployment with customised settings for over 40 machines and it only happens on certain machines. I don't want to restore default settings as and re-load our company settings on every machine this happens.
I had a corrupted file that crashed every time it's opened. Now the drawing recovery manager has this message when i click on the folder to try and remove the temp files. how to remove the recovery folders so this doesn't keep happening?
Drawing Recovery Palette Error Message:
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
We use autocad 2011 and we are trying to create a new tool palette. We have no problem dragging and dropping to our existing tool palettes, but we can not drop to anything new we create. We do not have any read/write issues. I have tried saving workspace, restarting CAD just erases the palette i tried to create.
View 2 Replies View RelatedIs there any option to load the dll on every drawing opened, like vba macro is loaded in start up suite. or is there any possibility to open a tool palette on every drawing opened.
View 2 Replies View RelatedI am using autocad lt 2014 and have some multi leaders on a tool palette that work fine but if I hit enter or right click for enter the multi leader will use what ever leader is set from the multi leader style that is set on the multi leader style control, but only the leader will come in wrong the text will come in correct.
View 6 Replies View RelatedI want to create a new Tool Palette Group. How can I do?
View 6 Replies View RelatedQuite often when I open drawings or just open AutoCAD my tool palete is there but none of the tools are there to select from? If I reset the tool palette it does the same. Sometimes they are there and sometimes they are not?? I have tried uninstalling and reinstalling but it still happens. I'm using AutoCAD LT 2013 for Mac. Screen shot attached.
View 1 Replies View RelatedI have created one drawing with 10 Layouts in different formats(A1,A0...etc) and with different Legends on it. I need to give these layouts to lot of users, where everyone uses one layout out of 10 in their drawing. Is there any way to add them in tool palette like dynamic blocks? or is it possible to add thme as a ribbon in the dwg template?
View 3 Replies View RelatedI am trying to create a pallette , where I can use routinely used small symbols(saved as drawings) for insertion into a drawing.
I've created a pallette but unsure how to get my symbols into the pallette.
I have just updated a whole load of block symbols as some numpty didn't put them on layer 0. When i have created a tool palette of the symbols, 4 of approx 30 symbols have got such a tiny tool image, that its impossible to see them, but oddly the rest are fine.
I have checked the blocks are zoomed to extents, checked the drawing limits are the same ones that are okay, and checked that the size of the block is the same, effectively i can not see any difference between the blocks. Even when i increase the image size to max in the tool palette view options the symbol is to small to identify. Oddly in windows explorer and in ACAD design center there is no issue with the tool image size.
Whilst i could manually create a new image, and tell the tool palette to use it, if this happens with all the blocks, it could be time consuming, when there could be a very simple answer i have over looked.