I have just load and reloaded 2014 LT upgrade and I am getting 0xc00007b error message. I am running win 7 Pro 64 bit.
I notice this is a common error with Autodesk products?
We purchased CC about a week ago and have not been able to use Premier Pro CC. We have tried uninstalling and installing. The message we get it "Adobe Premier Pro CC has stopped working" A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
View 3 Replies View RelatedI had both Inventor 2012 and 2013 (and entire Product design suite of both program versions) installed on my Win 7 64 bit Dell Precision Laptop, all working flawlessly. On recieving a copy of 2014 I decided to uninstall Inventor 2012 which I carried out through Add/Remove programs in Windows 7. Then I tried to launch Inventor 2013 and got an 0xc0000005 system error as per attachment 1.
I then went through the entire removal process to completely remove Autodesk products to do a fresh install of Autodesk 2014. This worked out and I did everything exactly as suggested here... [URL]
Then I disabled my Avast virus checker and stopped the process via task manager.
I then did a complete fresh install by right clicking on the Setup file on the Product design Suite 2014 dongle and choosing "open as administator" which I started without any issues. The installation then stopped while installing INventor 2014 with a 1406 error as per attachment 2. I searched the registry for the file mentioned in attachment 2 and deleted it from the registry and clicked retry and the installation finished without any further errors. I then restarted my computer and launched Inventor and again I recieved the 0xc0000005 error.
I then updated Inveontor with the DL21503391 update 1 from here... [URL]
I then updated 360.
I then tried to relaunch Inventor by right clicking and choosing "run as administrator" and proceeded to get the error 0xc0000005 as per attachement 1.
Obviously uninstalling 2012 is where the system 0xc0000005 issue began. I am trying to avoid a fresh Win 7 install.
My users are reporting that 2014 64 bit VBA crashes on program launch randomly.
I have 12 to 14 apps written in VBA. Randomly they crash when the user trys to run them.
Sometimes they load and work fine other times they crash inventor without reporting an error.
I've created a deployment for AutoCAD2011 x64 to be installed via SCCM. I've followed the instructions to create an SCCM package that were provided on the support website, as well as what comes on the CD. While I'm able to create the install and deliver the package, I get an error when trying to launch the shortcut (AutoCAD 2011 - English).
The error is a Microsoft .NET Framework error that states:"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.Access to the path 'C:Program Files Autodesk AutoCAD 2011Migration' is denied.
I went to check on the folder security and realize that the Migration folder doesn't exist.
In Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedError F4574 when launch CC?
View 3 Replies View RelatedI can't open Photoshop CS6, when I click on any PS6 Icon it highlights for a few seconds then goes back to normal without any error message, it just won't open. I've had this problem before but could always fix it by simply restarting the computer. That didn't work this time. I ran an Anti-Malware software yesterday, before I ran it CS6 was working fine. I'm running it again right now.
When I try to open a file in PS6 through Adobe Bridge, the error message: The application was unable to start correctly (0xc000007b). Click OK to close the application.
I am trying to install Photoshop 5 on an XP machine. It installs fine. However, once it starts I get an error message saying "Adobe Photoshop has encountered a problem" and must be closed.
View 1 Replies View RelatedImmediately after launching PS CS3 everytime, I get an error message "could not import the clipboard because there is not enough memory (RAM)".
Now, I googled for this error and found it seems to have been a problem ongoing since VERY early versions of Photoshop. Apparently it is recommended to dlete and recreate the Windows swapfile, since the error is probably caused by a corrupted or damaged swapfile. Well I follow this advice and it fixes the problem, at least for a while. Then a little while later the problem comes back.
Any idea why I am suffering the problem and how to fix it permanently?
I just downloaded the trial version of Photoshop CC to try the new stuff (I was still on CS before).I deleted CS by dragging the "Adobe Photoshop CS" Folder to the trash and then I installed PSCC.But when I open the program, it says (French translation, may not be English accurate) : "Unable to launch Photoshop CC because of a program error".
I looked up on forums that said to delete preferences or else, disk repair, uninstalling-reinstalling, but still, I get the same message again and again.Did I forget to delete a file to uninstall PSCS ?
Come across an issue when starting Photoshop CS6 and a windows error prompts with:
"Could not initialize Photoshop because of a program error"
I had x1 Illustrator file open at the same time as I launched the Ps app. I had to close the .ai file and re-try opening Photoshop again. There are a lot of little glitches with CS6 that I'm encountering more & more of. Is this common? or just a local problem with my hardware?I'm running Windows XP (32bit) with the latest service pack, & all CS6 apps were downloaded via Adobe Application manager.
I'm using AutoCAD 2012 LT and have having problems inserting/updating/editing fields. This is the error that appears
"There are no registered modules to edit fields or demand loading is currently disabled". When I click OK the Field pop-up appears empty! (see attached)
The BEDIT command is also not working. It was all working up until a few days ago! I have downloaded the most recent Service Pack and it's still not working.
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
When i try to convert my .dwg to a pdf on my laptop (second computer) i get an error message that the drawing might be password protected. it happens on all my autocad drawings
View 3 Replies View RelatedEvery time I try and plot a drawing I get this error message:
' YOU CAN NOT USE MULTIPLE INSTANCES AT THE SAME TIME'. The program then freezes for a short while then returns a message saying plot canceled.
I am using Map 3D 2011. Although I did have a trial version of AutoCad 2012 I had no problems plotting on both versions up until recently I have made no changes to any printer configuration, plot files or styles. I removed 2012 after I started getting this message but still I am unable to plot.
i'm working with this dwg that has a block in it that says "cannot be exploded" every time i try to explode it. is there anyway i can still get this thing exploded?
View 2 Replies View RelatedI have just installed AutoCAD 2014 with our company update and I am having problems using our tool palettes.
When I click the buttons on the palette to load our blocks I get the message below:cad2014 tool palette error.png
I've checked the directorys of the tool palettes and they are routing to the correct location.
After upgrading ATI graphics card driver, corel X5 wont launch at all neither will Paint.
ive tried re installations , repairs, un installing ATI driver, re installing corel, applying serv pack 1 and 2.
Hardware config:
Model Name: MacBook Air
Model Identifier: MacBookAir4,1
Processor Name: Intel Core i5
Processor Speed: 1.6 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Software:
System Version: OS X 10.8.2 (12C60)
Adobe Creative Cloud, Illustrator CS6
Problem:
Adobe Illustrator was working fine on my MacBook Pro. That is in the shop being fixed, meanwhile I have a loaner computer which is what the specs are above. All my Adobe apps work, except for Illustrator. When I launch it, it loads everything but just as the main menu across the top loads I get an error stating:
Configuration error uninstall and reinstall the product.
I'm trying to render a large drawing and I keep getting this error message:
"The Scene Cannot Be Rendered. The Scene Must Contain At Least One 3D Wireframe or Solid Model Object To Render"
Other, similar drawings do not get this error message and i cant figure out what is causing it.
I am getting an error message when I am trying to insert a schedule room tag. It does not matter which room tag out of the content browser I select, I get the same message. the message is as follow: "No symbol has been specified for the tag" All of the tags have worked up until today. Nothing has changed that I know of on our network and all of the paths seem to be pointing to the correct directories. We are currently using Architecture 2008. This problem is only coming up with these specific room tags.
View 3 Replies View RelatedWorking in Autocad Map 3D 2008.
I'm trying to export some blocks w/ object data to a shapefile. Error message is "Export did not succeed." ... very informative! I've also tried without attaching attributes, going to SDF, restarting the computer, repairing my installation. Nothing has worked. why Mapexport is broken now?
The configured Heidi Driver cannot be loaded. Switching to default software.
View 3 Replies View RelatedI worked on X'ref DWG. After editing the referenced file and reloading the X'ref, i get a message saying ' Unreconciled New Layers'.
What could be the reason for this and how to rectify this?
not sure why I'm having trouble using the blue "path" layers polyline path to loft the profiles and form the c-clamp.
View 2 Replies View RelatedI run Autodesk Land Desktop 2004 on Vista, it works, kind of.
I get this error message when I open the program: "Error writing the acamap.sys file"
When I say OK to the message, the program starts working.
At the end when i close the program i get this message: " Autocad application has stopped working"
The next message after this is: " Download updates for 2004"
Any way to avoid these annoying messages?
I'm getting lots of error messages when I bring up drawings in my 2009LT. Resource Manager Error. Cannot load resource only DLL. File not found, then many similar messages with AecResMgrenu.dLL.
Over and over, keep hitting OK till drawing loads. Not one specific file either.
Also: Unable to locate resource string. Resource Manager is not correctly installed.
Is there a way to fix without reloading 2009LT and having to reset all settings. Can that file AecResMgrenu be replaced. I have backup Program Files on CD.
Opening AutoCAD LT this morning no problem. Closed it down and then opened it up again about 10 to 15mins later and get this message (see attached pdf).
Windows XP.