AutoCad :: Fill Rectangle / Close Shape Surface With A Color
May 17, 2012How do we fill a rectangle or any close shape surface with a color?
View 3 Replies
ADVERTISEMENT
Photoshop :: How To Fill Canvas With Color Without Having To Cover It With Large Rectangle To Fill
Sep 12, 2013How do I get it so that when I draw a shape it will fill with color? In my options bar there is a rectangle with color where I can choose that, but sometimes that's not up. How do I pull it up?
How do I fill a canvas with color without having to cover it with a large rectangle to fill? I've gotten answers to this but none has solved the problem.
GIMP :: Pen / Rectangle Select Tool Shape Disappears When Try To Fill
Jul 16, 2012i'm basically making a shape with the pen tool, then i click the paint bucket, then the shape disappears. i've also done this with the rectangle tool and the exact same thing happens.
usually, it will work when i frst open the document, but after i start making new layers/text then i try to do this, the shape i make disappears.
how i can keep the shape so i can select the paint bucket tool?
AutoCad :: Fill Rectangle With Back Color
Jun 28, 2012I have placed a rectangle in my template and want to know if there's anyway to fill this rectangle with a color?
I can use another object if that's better - mainly wanting to be able to fill a pre-determined space with a back color.
Photoshop :: How To Fill Rectangle With Color
Sep 26, 2013How do I fill a rectangle with a color?
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Best Way To Close Object To Enable Fill Color?
Apr 6, 2011what is the best way to close an object consisting of multiple individual lines to enable a fill color? So far I've just been retracing the objects, but there has to be an easier way.
View 4 Replies View RelatedAutoCAD Civil 3D :: Cut / Fill Surface Labels - Color Specific
Apr 29, 2013I followed the steps I found online to create color-specific surface labels (I assigned red to the cut elev and green for the fill elev.), but when I display them using the spot elevation on grid, I am getting both red and green elevations on same point (they are both fill elev or cut elev.), and why are there two elevations (cut-red and fill green) displaying?
View 9 Replies View RelatedAutoCAD 2013 :: Fill Shape With Color - Set Drawing Space To Fit A4 Size Paper
Oct 11, 2012a)) I have a simple drawing attached with color outlines.How do i fill in the shapes with color.The blue outline filled in Blue and the red outline filled in Red
b)) How do i set the drawing space so as it fits to a A4 size paper?
After Effects :: Fill Up Shape Or Vector With New Color?
Aug 29, 2013I want to have an invisible shape, I imported from AI, fill up with a color from the bottom to the top. Like it's "loading".
View 1 Replies View RelatedIllustrator :: Create Wavy Line (zigzag Feature) - Outline Shape And Fill With Solid Color
Aug 11, 2013I would like to create a wavy line (the zigzag feature is not exactly what I need here) to outline a shape and then fill it with a solid color.
This is approx what I want; however the undulation needs to be more round and less peaked.
AutoCAD Civil 3D :: Create Cut Fill Surface From Existing Surface
Mar 1, 2013Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
AutoCAD Inventor :: Not Able To Close Surface
Nov 1, 2011I am trying to build a robotic head using the surface modeling and thereafter thicken the surface to form solid. I was not able to load the original model as the file size is exceeded. I use a derive model and the problem is similar.
View 9 Replies View RelatedAutoCAD Civil 3D :: Volume Calculation Method - Cut And Fill Are Not Even Close?
Sep 4, 2012I'm to compare volumes in c3d to Inroads. My volumes are not matching ( cut and fill are not even close). Civil 3D uses the average end area and InRoads uses 'triangle method' to calculate the total volume. How can I get C3D volumes to match InRoads which is verified correct?
View 5 Replies View RelatedAutoCAD .NET :: Fill Table Inside Specified Rectangle?
Jun 23, 2013Let's say I have a rectangle and I want to fill a table inside of it.
The below is the code snippet I wrote.....
Table tb = new Table();tb.NumColumns = 5;tb.NumRows = 40;tb.SetRowHeight(C_height / 40);tb.SetColumnWidth(C_width / 5);tb.Position = new Point3d(ext.MaxPoint.X, total_MaxPoint.Y, 0);tb.Width = C_width;tb.Height = C_height;tb.SetTextHeight(C_height / 40, (int)RowType.DataRow);tb.HorizontalCellMargin = 0;tb.VerticalCellMargin = 0;btr.AppendEntity(tb);tr.AddNewlyCreatedDBObject(tb, true);
Where C_width and C_height are the width and height of the rectangle respectively.
Then, I got the following
The red line is the specified rectangle. It seems like SetRowHeight and SetColumnWidth are not working.
FYI, the rectangle size is around width = 3.5m height = 5m.
Photoshop :: Gradiant Fill In Shape Of A Shape?
Dec 18, 2007Is it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View RelatedAutoCAD Inventor :: How To Project Onto A Surface A Divergent Rectangle
Dec 13, 2013I would like to perspective-project a rectangle along its normal onto a spherical surface to create a 3D sketch or curve.
The rectangle is within the volume of the sphere.
The rectangle is much smaller than the sphere.
The rectangle normal may be orientated with any vector.
So for parallel projection this can be achieved by creating a 3D sketch and the Project to Surface command. But I would like to define a divergent angle so the rectangle tapers out towards the spherical surface interior.
Lofting is difficult or impossible for other factors. the reasons are lengthy to explain here. Is there a surface or solid modelling trick, or add-in, that allows this?
AutoCAD 2013 :: Create Simple Shape For Rectangle
Nov 6, 2013I wanted to create simple shape for rectangle such that its dimensions are selected from the block table. For that purpose, I have constructed the required constrains (geometric and dimensions) and then a “block table” (attached).
As I tested the behavior to have 1X2 rectangle (attached), I got a rotated one (attached)!-
AutoCAD Inventor :: How To Draft Shape That Begins As Protruded Rectangle
Jan 30, 2012I am attempting to draft a shape that begins as a protruded rectangle. The shape then continues as a protruded rectangle that bends and conforms to the shape of cone. That may have been confusing. The profile does not change in shape to a cone. Lets say I want to do a sweep, and use the rectangle as the profile. I pick a path that was project wrapped to the cone, and the cone as the surface. I have trouble with the outcome.
I get all kind of open loop errors, and stuff with the paths, oh and also I get an error saying that the the path is not tangient and continuous. I have spent hours trying to go at it different ways. I tried using rails and I still can't get this sweep to do what I am wanting it to do. The rectangular profile has to be perpendicular to the cone surface as it follows it for the outcome to be correct. I have attached the file.
3ds Max :: How To Draw Faces On The Shape To Close It Up
Nov 3, 2011I have a shape that has 2 open faces. How can I draw faces on the shape to close it up?
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
Illustrator :: How To Close Off Included Shape
Jul 22, 2012I have attached a couple of comic book bubble shapes that have "tails" on them (the little pointy part that you put near the persons mouth who is speaking the dialogue). I'd like to remove these tails and close off the shape so that it's symmetric (as if the tail never existed).
View 9 Replies View RelatedPhotoshop :: How Do I Create A Rectangle With A 1px Border, No Fill?
Jul 9, 2009I just want a one point thick border rectangle with nothing filled. I tried using the rectangle marquee and stroke. Doesn't work. I tried the rectangle tool and rasterized, it disappeared.
Using PS CS 3.
Illustrator :: Rotating Text With Rectangle Fill?
Oct 8, 2012I need to create a text with a rectangle background and a coloured border around this rectangle. Here is what I do:
- I create a text
- I select the text and add a fill and a stroke that I then transform into a rectangle
- I now have my "label" as I want it to be but now I need to rotate it.
Problem is I can rotate the text but fill and stroke don't follow, they remain horizontal and just adapt so that it still fits the text. As a result I have a rotated font with a big rectangle box. Can I rotate fill+stroke with the text?
AutoCAD Visual LISP / AutoLISP :: Creating Solid Rectangle Shape File
Sep 8, 2011I want to create a custom linetype that uses a solid rectangle 0.5wide and 1.0 long. Basically I want to create a shape file from an existing block I have so that I can insert it into the linetype definition. Is there an easy way to do this in ACAD 2009?
View 8 Replies View RelatedXara :: Rectangle Tool Includes Linear Fill?
Jul 16, 2013I`m still using Xara X1... and am having two issues with the rectangular tool.
First, the rectangle draws on an angle, almost more like a diamond. I would like it to draw parallel to a horizon.
Second, the rectangle draw includes a linear fill. I would like to lose that parameter so that the rectangle can be a simple solid color that I can choose for myself.
GIMP :: How To Fill Rectangle Area With Gradient That Fits It
Nov 25, 2013These gradients in gimp are really hard to figure out (not saying other things seem easy to me), however I'm sure if one knows what to do, they can solve many problems.
I had that screenshot of a text list:
And I wanted to make it fade away from the highlighted line:
However, with the blend tool, this is actually impossible or really really hard, because I can't aim it so preciselly.
Corel PHOTO-PAINT X6 :: How To Jump Directly To Uniform Fill - Models Dialog For Fill Color
Apr 23, 2012In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
Illustrator :: Fill Section But Using Fill / Stroke Only Changes Line Color
Feb 17, 2013I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
Xara :: Fill Rectangle With Noise And Create Bitmap Copy
Sep 25, 2013I don't know if it is the update or not but every time I fill a rectangle with noise and create a bitmap copy and try to erase the white with Medhi eraser classic XP&GD and XDPX now stops working. I have tried this over and over with the same result, or should I say lack of a result? All I am trying to do is make a star field. This is the same basic method I used before to create animated snow..
View 7 Replies View RelatedGIMP :: Creating Filled Rectangle Without Using Bucket Fill Tool
Jun 4, 2013Is there a simple way to create a "filled rectangle" in GIMP - without using the Bucket Fill Tool?
View 3 Replies View RelatedPhotoshop Elements :: Draw Rectangle Or Ellipse As Line Without Fill?
Oct 19, 2013How do I draw a rectangle or ellipse as a line without fill in Photoshop Elements?
View 4 Replies View RelatedPhotoshop Elements :: Draw Rectangle Outline With Transparent Fill?
Nov 5, 2012I am newbie using Elements 10.
How do I draw a rectangle that only displays the stroke. That is, it has a transparent fill.