AutoCad :: Extracting Length / Angle
Apr 7, 2011
I have the base point X and the secondary points from lets say 1 to 20 (total of 21 points)
I draw lines from X to every one of the secondary point (from point X to point 1; from point X to point 2; from point X to point 3; ........from point X to point 20)
If you click proprieties on one of the lines, you will see that it has a Length and an Angle. I need to manually copy the length and the angle of every line, and paste it in a table on Excel/Word.
Problem: I have about 100 points a day of this kind, so manually copying their length & angle is a real pain. Is there any way faster to do this. A specific command in AutoCad (2006).
View 9 Replies
ADVERTISEMENT
Aug 26, 2013
I am jammed in this matter...I have my 3d sketch and i would like to control the angle betewwen the two planes with
the dimension of the 3d sketch. I am at the level that i can change angle between planes.
View 1 Replies
View Related
Sep 4, 2012
Just started a drawing in C3D 2013 using an existing template. If I draw an arc using the "Angle" rather than length or radius, entering the angle as 11.1601, then label the arc, the delta angle is converted to hms or 11.0936 . The template and labeling style are ones we've used for several releases. I've compared the feature settings, units and the curve labeling command and can not find where this is being changed.
View 8 Replies
View Related
Feb 15, 2012
How do you draw a line without the line length/angle showing as to go?
View 6 Replies
View Related
Sep 25, 2013
before this i use in autocad 2007 and dont have a problem but in autocad 2012 have bug and only showing angle only
View 9 Replies
View Related
Jun 23, 2012
I am drawing a diagram to describe a mathematical word problem. Since it is easier to visualize with a drawing, I want to draw it using the given dimensions. But angles used in the diagram are unknown and are not needed for the answer to be calculated, so the only way to draw this freehand is to guess at the angle resulting in the correct distances to be off.
Here is the word problem: There are two ladders, one 40 feet and the other 30 feet, each touching the base of one of two buildings and leaning against the other building. If the ladders cross 10 feet above the ground, how far apart are the buildings?
So for my drawing, being rather simple considering what AutoCAD can do, results in this:
Can AutoCAD calculate the angle needed to place a line of a given length between two parallel lines that are a distance apart less than the length of the line to place between them, having the endpoints of this line touching the parallel lines, fitting exactly?
For the word problem, the distance between the two parallel lines is what needs to be solved and the math is quite invloved, having to find the roots or solution of a quartic equation. (I have the solution figured out to be 26.03287754 feet)
What I am afraid of is that this would require to program an AutoLISP routine to create a new command that one can call from the command line. I see it using the the measure command with relative and absolute co-ordinates. This may be far from a "beginner" question. I can do this quite easily on a peice of paper: having two parallel lines drawn, take a ruler and placing the "0" mark on one line, then adjusting the angle until the desired length just reaches the opposite parallel line. I used to use this trick quite often when drafting with pencil and paper to divide a distance into a required number of even amounts, so this can't be that difficult to do with AutoCAD!
View 9 Replies
View Related
Oct 27, 2009
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies
View Related
Jan 8, 2013
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
View 3 Replies
View Related
Mar 16, 2012
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies
View Related
May 24, 2002
Command to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies
View Related
May 11, 2013
With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
View 2 Replies
View Related
Jan 24, 2012
I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?
View 1 Replies
View Related
Oct 15, 2008
Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies
View Related
Oct 5, 2011
Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies
View Related
Jul 25, 2012
I have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
View 1 Replies
View Related
Feb 11, 2011
Let's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies
View Related
May 26, 2013
I have used a driven contraint in a sketch.
Can that also be done in an assembly?
In one assembly I want to make one angle half of a driven angle.
View 3 Replies
View Related
Jul 6, 2013
how to convert "real world" angles of elliptical arcs into those shown in a dxf file?
Say that I have drawn an elliptical arc with its start angle on 210 degrees and an end angle of 324 degrees. The values in a DXF file, for an elliptical arc, have something to do with the contant "PI" (3.14159). I know that a full circle is 2*Pi but how to do this with elliptical arcs!!
View 1 Replies
View Related
Nov 13, 2013
Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
View 19 Replies
View Related
Nov 19, 2012
I would like to draw a smiple line using the transparent command 'AD (angle-distance).
My distance is not horz., so I want to enter the Vertial angle and the slope-distance, in LLD the command was AD VD.
So how do you do this in Civil 3D 2012.
View 1 Replies
View Related
Dec 7, 2013
On an HND assignment there is a drawing of a Villa in plan view with outer walls, inner walls and then some attributed blocks created for furniture. Once drawn the second task is as follows.
Task 2
Write a report describing the methods you used, with a layout plan inserted into the document and to include a bill of materials extracted from the attribute files.
How you would go about extracting the BOM from the attributes?
View 9 Replies
View Related
Apr 20, 2013
I just want to extract the coordinates and number of survey locations that are represented by point blocks from a drawing.
My template is on the desktop and is named
TAYLOR EXTRACT.txt
BL:NAME C008000
BL:COMMENT C008000
BL:NORTHING N0010003
BL:EASTING N0010003
I get the attribute extraction menu
select some points, verify that points have been selected
specify the above template
Specify the export file name
select ok
returns 0 records
View 9 Replies
View Related
Nov 21, 2012
I am using AutoCad LT 2013 and I am looking to extract at the Wire#, the To_Device and the From_Device. I really dont care about the block name but if I have to have it fine with me. I have tried to follow the extraction file within AutoCad LT but havent been able to figure it out.
View 2 Replies
View Related
Jun 10, 2013
How in AutoCAD 2012 to be able to extract more than 256 columns worth of attributes per block?
It keeps giving me an error saying that excel won't allow it... excel has had more columns than 256 since 2007!?!?!
Or is there a third party extraction tool that I can use that extracts information in the same way the AutoCAD one does?
View 1 Replies
View Related
Aug 21, 2013
I'm trying to loop through all the blocks on a drawing and if the block contains a group of tagstrings (B,C,D and H) I want to then extract the textstring from all 4 attributes and place them in a ListView. I got it to work but it is not consistant. Sometimes it doesnt get all of the attributes. Basically just want to grab all of the blocks that the 4 attribute tagstrings (B,C,D and H) and extract their textstrings to a ListView. Here is the code I have so far.
For Each objEntity In objModelSpace
With objEntity
If StrComp(.EntityName, "AcDbBlockReference", 1) = 0 Then
If .HasAttributes Then
TableData = .GetAttributes
[Code] .........
View 6 Replies
View Related
May 28, 2013
how to extract geometrical data (lenght, width, height) from 3d object to a tab or an external file?
View 0 Replies
View Related
Apr 12, 2012
I want to extract xyz coordinates from 3d polylines using AutoCAd LT 2012 into excel, as i need the data in a tabled format, I use the polyline coordinates to create cross sections of river beds which I then use to model river flows using HEC-RAS software.
View 2 Replies
View Related
Apr 3, 2013
regarding extracting dynamic blocks.
Is there any way I can tell AC to only extract what my Visibility States are showing? IE if I have 2 Vis states within a block, 1 for a 2 seater couch and 1 for a 3 seater, can I configure AC to extract whichever Vis State is active? Currently it simply extracts the block name.
View 2 Replies
View Related
Sep 19, 2011
I have been asked to write utility that will open a DWG file, retrieve layer data from the file and put it into a spreadsheet.
I know nothing about AutoCAD but I have been reading on this forum and gathering information. I have found that I have to write a dll that will be used inside of AutoCAD. Here is what I have so far:
1. I have AutoCAD 2008 (will convert to 2011 or 2012 later)
2. I have .NET Framework 4.0
3. I have Visual Studio 2010 Express
4. Needs to be done using VB.NET.
I need to do this using .NET.
Do I need the 2008 API?
Could this be done easier using VBA?
Once I create the dll how do I use it inside AutoCAD?
How do I grab the layer data for studs and braces?
View 3 Replies
View Related
Aug 10, 2012
I want to extract 2D drawing view of the attached model. I tried but could not succeed because most of the sketches are on the angled user defined work planes.
See the following links, I did the same for some of my other models:-
[URL] ...
[URL ...
How can I show the modelling process of this model with 2D drawings?
View 1 Replies
View Related
Jul 27, 2013
is it possible to export the position and elevation of points plotted in a section view to a csv or txt file? I have a surface with section profiles cut every 100 feet or so, and would like an external copy of just the data used to plot the section views to use for another analysis.
View 9 Replies
View Related
