AutoCad :: Duplicate Objects Due To Editing Blocks?
Jul 27, 2011
I have a site plan from another .dwg that I copied with base point and inserted into my .dwg as a block. To edit this block in my .dwg I Rt. Click-Edit Block in Place, then use the Refedit Toolbar to save my changes. It seems each time I edit the block the linework, circles, etc. are duplicated; resulting in several duplicate objects stacked on top of each other within my block. I exploded the block, used the drawing cleanup tool and it found 37,000+ duplicate objects to delete! This happened before in another .dwg. I am running AutoCAD Civil3D Land Desktop Companion 2009, I also have an EaglePoint plug-in that we use to download our data.
View 5 Replies
ADVERTISEMENT
Jan 7, 2014
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies
View Related
May 18, 2012
The AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
View 1 Replies
View Related
Apr 22, 2013
I am having duplicate objects in my files and I am wondering if they could be deleted. I think that I saw the option to select these kind of objects but now I need a remainder so I can get rid of the unnecessary stuff.
View 2 Replies
View Related
May 15, 2012
Not sure if this is something that has been going on a while, if it is a design flaw, or if it just a workflow thing that we should be more mindful of, but here goes:
1. I data reference an alignment into a drawing.
2. I later data reference in a profile that was created from and associated with that alignment.
In this scenario, Civil 3D creates a duplicate alignment for the profile i.e., the orginal alignment is in prospetor as 'Alignment A' and the profile being data referenced in creates a 'Alignemnt A (1)' duplicate and associates itself with it.
This also happens if I bring in a different profile created from the same alignment IF the alignment was already present as a data reference in the drawing.
This seems wrong. It doesn't do any of this if I data reference the profile in first...
View 4 Replies
View Related
Jan 17, 2012
Where is the command delete duplicate objects in AC2012? In version 2011 it was in express tools. Whether this command is not in version 2012?
View 2 Replies
View Related
Sep 1, 2007
I made a smart object and duplicated it about 10 times...
I want to make an edit to the contents of one but I don't want to edit every instance of it. Is there a way to edit only one at a time?
View 1 Replies
View Related
Jul 19, 2012
Can we delete overlapping duplicate objects for both model and anotations in Revit
View 1 Replies
View Related
Jul 11, 2012
I was working in a drawing when I had a Fatal Error. When I brought Acad back up I have lost my editing capabilities for my 3D walls and blocks.
View 1 Replies
View Related
Oct 24, 2013
I have a block that we use often (it's a connector block), and I have already completed the Single Lines with said block. Now the client wants an additional piece of information that I would need to add as an additional attribute to this block.
This block is dynamic, with a visibility and a flip parameter, and two attributes, Line# and Cable/Panel.
I'm going into BEDIT for the block, adding an attribute, and deleting the Cable/Panel Attribute to make room for the new att. When I exit out of the Block Editor, the new attribute doesn't exist, and the Cable/Panel attribute is still there. What's really weird is that the Cable/Panel att used to be in the flip parameter, and now it's not. It stays when you flip the block.
View 2 Replies
View Related
Sep 24, 2012
making dynamics blocks and more over utilizing the attribute feature but I have discovered some chnages tat i need to make.
My question right now is, once an attribute is created and put into the block editor is that it? Ifi need to edit it can i edit it? I don't really see an option or command right off that would allow me to do this ?
View 1 Replies
View Related
Sep 21, 2012
How to write a script which can duplicate objects and apply colours. I have a full break down of the project together with a Illustrator Action that demonstrates the functionality of the required script.
View 3 Replies
View Related
Apr 18, 2012
I received some outsourcing drawings which include this block. All time if I try do some edits in block editor size of this block changed. Also if you reset this block, size changed. What is wrong with this block?
View 1 Replies
View Related
Aug 24, 2012
I am wanted to change some setting for editing blocks in 2013. I want to edit the block in place by just double clicking onto it. I can go through the properties and click on "edit in place" but I would like to eliminate that step.
View 9 Replies
View Related
Aug 2, 2013
I am designing a solar field and have my solar panels laid out in a grid. I have each panel represented as a block with 4 attributes: Column, Row, Module Type, and Combiner Box. There are ~5,000 panels so it will take forever to modify the attributes of each block individually. Is there a way I can select multiple blocks (an entire column for instance) and set the "Column" attribute for ALL of those blocks to the appropriate value?
My end goal is to be able to export the information in those blocks to excel. So if there is any way to tie 4 pieces of information to an object and export it into excel not using block attributes, that would work for me as well.
I attempted to use Lee Mac's Batch Attribute Editor BAtteV1-4.lsp and it was very close to what I needed. But it will modify the specified attribute of all blocks within a drawing, whereas I only want to modify the attributes of all blocks within a selection.
View 3 Replies
View Related
May 3, 2013
Editing attributed blocks causes them to disappear from the screen. Edits include changing attribute values, moving attributes, or moving the entire block. The block is not gone, so saving and re-opening the drawing will display it again, but this is a terrible workaround when moving and editing many blocks in a large drawing.
We do not use annotative or dynamic blocks, so these are just good old-fashioned attributed blocks.This behaviour is being seen on both Windows 7 and older Windows XP systems with various hardware specs, and it is only in the 2013 product. We still have some stations running Map 2012 that do not experience this issue even when working in the same drawings.
View 9 Replies
View Related
May 24, 2012
Drawing disappear after using a dynamic block's stretch parameter?
I’ve made fairly simple dynamic blocks with lines or leaders that can be stretched and some attribute text. After moving the stretch grip of the block the block will disappear. If I then do a regen the entire drawing disappears. But it seems to be only a graphical glitch based on the fact that I can then save the disappeared drawing, reopen it and everything is up to date. I can even see my devious little dynamic blocks. But of course if I try to edit them everything will disappear again.
View 4 Replies
View Related
May 2, 2013
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
View 5 Replies
View Related
May 28, 2012
I installed Autocad 2013 a few weeks ago and I have a lot of blocks made with earlier versions (2008, 2012, etc...) that I need to use. When I try to edit such a block, block editor gives me trouble with visibility states. I can't select visibility states, and when I can, the changes made to that state don't follow and often the program reverts back to the first visibility state for no reason. This is getting to be extremely annoying and I'm thinking of going back to 2012 because of this. Is there a patch or some way to correct this?
View 4 Replies
View Related
Jun 19, 2013
I am a standard AutoCAD 2012 user. I am trying to edit drawings created in Civil 3D 2012. Is it possible to edit attribute information? I installed Civil Object Enabler so now I can view the information but can't seem to edit it.
View 6 Replies
View Related
Oct 27, 2011
I'm using autocad 2009 I Wrote the word multiplex auditorium using the mtext command.. but when i pressed enter, it got lost somewhere. using the find command [available in the edit menu] i can see it but cannot select it when i close the find dialogue. how can i search for this "multiplex auditorium" word and change its size using the mtext command..?
View 1 Replies
View Related
Aug 18, 2009
Using 2010 with update 1 or whatever it's called these days, I'll just call it the first fix.
I've made three grading objects using "Grade to Relative Elevation" along a feature line. Then I've added a grading transition between them. This seems really unstable now, like making the wrong move makes the whole thing disappear...but what is strange is the feature line that is attached to the grading object that I have added into my surface remains, but there are only a few lines where the grading objects used to be, basically the line that seperates the different sections of grading.
There's no way to edit the grading again either, it has to be remade, because there is nothing to select.
Civil 3D 2010
Dell Precision 690
Intel Xeon 2.00GHz Dual Core
4 GB RAM, 256mb nVidia Quadro FX 550
Windows 7 URC 64-bit Operating System
View 1 Replies
View Related
Dec 22, 2011
I was wondering if there is a way to edit single line text when there are multiple objects selected. I have multiple text which need their justification edited but there are non-text items amongst them. Instead of clicking on each of them I would like to just select the area and then edit the text as required.
View 3 Replies
View Related
Jun 13, 2012
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
View 1 Replies
View Related
Jun 26, 2013
I am going through an architectural background, converted over from Revit. I have to go through and routinely burst the object, then qselect, choose what is not equal to bylayer, and change to bylayer.
I don't want to burst everything, making a monster out of the file, but going into every individual block to change the colors within the block to bylayer is also extremely time consuming.
Is there an easier way? maybe a wishlist item for ACAD 2014 to include objects within blocks, when using QSE?
View 6 Replies
View Related
Nov 12, 2012
I am creating a new block that includes text, lines and a solid object. The block is creating properly, however, the linework is behind the solid object.
How do I control the draworder of the items in the block?
Is there a way to set the order before I create the block, OR do I have to modify the block after I have created it?
View 3 Replies
View Related
May 24, 2011
I have a multiple blocks in my drawing and I would like to select certain obejects within these block from model space, i.e all lines = White, and then return their their combined length.
At the moment I have to explode all of the blocks, use qselect, run length.lsp to get the combined length of the selection and then undo the actions previous to the block explosion.
View 3 Replies
View Related
May 26, 2011
I have a block which represents a piece of equipment on a factory floor. It has two subcomponents which are blocked with the main equipment. Consider a rectangle and two smaller circles blocked together. Each of the subcomponents (circles) has a point parameter and a move feature so that the components can be moved independently from each other and from the main equipment.
Here's the issue: If a user accidentaly (or purposely) places the grip from one of the subcomponents snapped to the grip of the other subcomponent, then the two seem forever attached; when I try to grab the grip of one of the subcomponents to separate them, both grips get selected and both components move together. At this point the two components appear to be inseparable with the grips permanently joined.
Here's the question: Is there a way to separate the two components once their grips are made coincedent? Or is this a case of "just don't snap the grips together"? I'd like there to be a way to pull the components apart.
View 6 Replies
View Related
Dec 3, 2012
Everytime we insert a block from our library, a message pops stating:
"This application has detected a mixed version of AEC objects participating in this operation.
Newer AEC objects will be disallowd from participating in this operation."
I already converted all blocks to AutoCAD with Exploded AEC Objects, but the message persists.
View 2 Replies
View Related
Jun 25, 2013
What I want this block to do is to keep the "REF. NORTH" text aligned and properly spaced whithin a single motion while rotating it with the thick line.
AutoCAD LT 2012
Windows 7 - 64 bit
View 7 Replies
View Related
Dec 8, 2011
Somehow the objects of my dynamic block have moved away from the original basepoint.
I can't simply edit the block and move all the objects back to 0,0 because then I have to re-do all the stretch commands since the stretch windows don't move.
I have a basepoint parameter but it doesn't seem to be working.
View 4 Replies
View Related
