I've got a problem with some of my text's in Autocad. From the screenshot you can see some different texts, theese are copied by their content and pasted manually.
Now, ive got to change the content of theese, and i dont want to do that 1 by 1. Is there a way i could edit for ex. all my YV-E-------------1H at the same time?
I am trying to change text in hundreds of drawings. What I have is a line of text say "the brown fox" and I need to change it to "the black dog". I have probably 1500 drawings I need to do this in. I am not versed in scripts of lisp. I know the ACAD commands to do this but could develop a script file to batch this.
View 3 Replies View RelatedI have a schedule on a drawing and they used blocks for all the text. I want to change all the letters to uppercase.
View 4 Replies View RelatedMy autocad crashes when I'm working with many similar objects. As the roof shingles. Even when creating a block with all objects, when passing the cursor over the block cause the system to crash (its even worst this way). It seems that the program attempts to process each tile individually (further these tiles are rounded).I've been working with large roofs, such as 9mx4m.
View 5 Replies View RelatedI have a library of dynamic blocks that we use for various systems. Each dynamic block has roughly 50-100 visibility states. Sometimes I need to use previous drawings for a new phase of work and the symbols that were previously new are now existing and need to have the letter "E" next to it to indicate as existing.
Currently I have duplicate dynamic blocks for "existing" and "re-located" blocks. This seems redundant and would be much more logical to select a number of devices and simply change a visibility to either new, existing, or re-located. However, I cannot think of how to do this unless either with an attribute or a second visibility pulldown.
I have about 500 files that I need to change one line of text in. Example. File name is XXX 001, the line of text is the file name so it would read XXX 001. XXX 002... etc. up to XXX 500. Is there a way that I could automate it opening, changing this line of text, saving and closing?
View 1 Replies View RelatedI want to create a space style similar to BOMA with editable boundaries to use for LEED Daylighting calculations. I figured out how to make a new property set definitions, new space style, etc., but I can't get the boundaries to read as the LEED boundaries. I want the Base area to remain as is, but I want NET to be Daylit, Useable to be Sidelit, and Gross to be Toplit.
I could do the workaround and just use the OOTB BOMA style, but then others editing will have to constantly translate which means what as we edit the drawings. When you look at the display display Properties for the space style, the boundaries and hatches read as net, useable, etc. I can't figure out where to redefine those and when you right click the space and Edit Boundary, I need to be able to display the correct properties, not the BOMA properties.
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
How to compare two similar solid model and found where its differetiate is, and how to compare two similar drawing let say rev.1 to rev.2 and found where its differentiate is?
View 1 Replies View RelatedI am trying to make a CD cover graphic in photoshop.
I have a logo that has been flattened, and it is a standard rectangular shape. It would flow with the shape of the CD much better if I were able to apply a curve to it, similar to using the text tool along a curved path.
I have used the Transform tool which only allows changes in angles. I have also tried multiple filters...
Filter --> Distort --> Pinch
Filter --> Distort --> Polar Coord
Filter --> Distort --> Spherize
and none of these give me the desired FX. They only massacre the image.
Without redrawing the logo from scratch, is there any way to bend the graphic along this curve?
Is there a text editor window in Illustrator similar to Freehand? I want to be able to edit text without constantly having to zoom in so that I can see the text, then zoom out again to see the whole page.
In Freehand, you could select a Preference that would open a Text Editor window that was consistant in size no matter what the zoom level was. You could opt to show the text in 12pt Helvetica or in the actual font and size. This was enormously useful in organizing and shaping the size of the text.
I am developing a plugin which is supposed to fill contents (text/image) from external source into a ai file that has placeholders. So far I am able to get the text part working using text frames. I am however not able to figure out a way to provide placeholder for image. Is there an equivalent of textframe for image? what are the alternatives?
View 5 Replies View RelatedI am interested in designing text similar to the way "urban" is designed in this logo. How would I achieve this?
[URL].........
I've got about 1000 ten-to-twelve word "sayings" that basically need to go on index cards. I have all these sayings neatly organized in Excel.
all 1000 need to end up as a 4"x6" image.
Do I have to manually create a text layer, and cut and paste all 1000 sayings into it, one by one, saving the file each time?
I have about 500 drawings which i want to change the border on. Is there a way i can change them all at once?
View 3 Replies View RelatedI've been given about 14 DWGs from another company all on different discs. Each DWG is a page to a set of Shop Drawings. All objects are in model space. I want to combine all of them into one drawing but every drawing has similar block names with different objects associated with the block and when I copy the objects from one drawing to antoher, the blocks morph into the exisiting block, if that makes sense. Just a poor initial set up.
Anyway, the solution to this, I have found, is to rename the blocks in each drawing to have room numbers on the ends, giving them unique names and avoiding the "morph" upon inserting. I have about 15 blocks per drawings to add -XX with XX being 01-14. Is there an easy way to modify them or do I need to do the RENAME command as many times as needed in each drawing?
Is there a way to change multiple MTexts at once to a certain font? I don't have the full version, only AutoCAD LT 2013 so unfortunately I don't have the fancy express tools or lisps.
I have at least 1000 MTexts that need to be changed. This will take a long time if I have to activate each one and change them individually.
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I am having problems with changing the height of the dimension text. I have tried going into the style editor and changing the text height in there and then saving it. The number for the height that I changed stays saved however the actual text height on the drawing does not, not even after I tell it to update.
View 3 Replies View RelatedI'm working with Autodesk Inventor 2009. I have several parts colored in gray, black and red.
The grey color is the basic part color/material.The black color is feature color styles.The red color is face color styles. I need to change all the face color styles (red) to the original part color/material (gray/default). I can do this by right-clicking on a surface > properties > face properties.
My problem is that I have a lot of surfaces (mostly due to fillets). I can choose multiple ones with ctrl + click, but even that would take forever.
Is there an easier way to change all the face colors at once?
I have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies View RelatedI would like to change the manning coefficient for multiple existing pipes. I can't use the Panorama tool as it doesn't provide this parameter.
How could I do this?
Using Building Design Suite Ultimate 2014
Is there a way - or 3rd party app or lisp- to change the width of multiple Mtext objects all at once? I have several drawings where the width of all Mtext objects is 1.25, and I would like to change all of them to 1.
View 8 Replies View RelatedI have used annotative text and selected yes for match orientation to layout for the text. In the viewport it is rotating automatically with the view, however the boxes around the text do not rotate as well. Is there anyway to automate this?
The Client requires a key plan which has all the pipe data on it. The key plan is oriented in one direction. Then for the plan & profile drawings, the plan is oriented in another direction. I don't want to have two create two sets of text (one for the key plan and one for the plan/profile drawing). How can I use one set of text and make it work in the key plan and for all the plan/profile drawings? Image is attached.
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
this code is used to fix specific font but its problem that it will prompt you to select single text
i need to make it to select multiple text so it saves me a lot of time,
;;; Process Individual request
(defun cht_ProcessIndividual ()
(setq sslen (sslength sset))
(while (> sslen 0)
(setq temp (ssname sset (setq sslen (1- sslen))))
[Code]...
Is it possible to do a multiple-records data merge that doesn't generate multiple text boxes? And if so, how?
For publications such as a directory with contact information, it would be easier to manage the layout by merging multiple records into one text box. However, it seems like the only option in InDesign is to merge the records into each of their own text boxes.
I want to convert a single text box to two separate text boxes (not multiline text). Let's say after the fifth character.
For example:
"Hello World"
And I want to change it into:
"Hello" "World"
And I will move them separately like:
"Hello" _______ "World"
or
"Hello"
_______ "World"
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I'm in the process of designing a cd and I have 10 layers with type on it. I'd like to know how I can change the font in one layer and automatically adjusts all other layers.
Is this possible? I guess it is, now I have to change each layer manually....not very efficient I know :-)