My autocad crashes when I'm working with many similar objects. As the roof shingles. Even when creating a block with all objects, when passing the cursor over the block cause the system to crash (its even worst this way). It seems that the program attempts to process each tile individually (further these tiles are rounded).I've been working with large roofs, such as 9mx4m.
View 5 RepliesIf I have several drawings open at the same time and have done work to some of them, at the end of the day I just pick the AutoCAD application "close" button (the "X" in the top-right corner of the window) and I'm prompted "Save changes to <drawing>?" for each of the drawings.
Unfortunately, most of the times I do this in AC2011, AutoCAD crashes. The next time I open AutoCAD, it initiates the recover but all the changes have been saved in the *.dwg file.
I know this is not the best way to save and close drawings but it has never been a problem.
I just started having an issues with the delete feature. When I click on an object and it highlights it--when i hit the delete button, it doesn't delete the object any more. Also i should be able to click on as many object as i want, now it makes me hold the shift key down. And also when I click on an object then pull the layers tab down to assign it to a diffent layer ---it won't change it now.. what do you think is going on with the software and who might I contact to get this problem corrected.
View 3 Replies View RelatedToday i started to experience this crash while moving multiple grouped objects. These objects were from a powertrace and had transparency. this is on vista 64bit. doesn't happen all the time.
Problem signatureProblem Event Name: APPCRASHApplication Name: CorelDRW.exeApplication Version: 16.2.0.998Application Timestamp: 50b2a2e4Fault Module Name: CdrTra.dllFault Module Version: 16.2.0.998Fault Module Timestamp: 50b2a50fException c0000005Exception Offset: 000000000003b757OS Version: 6.0.6002.2.2.0.256.6Locale ID: 1033Extra information about the problemBucket ID: 94246814
Can not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedI am exporting a design for 3D printing, and it includes multiple objects. If I save each part as a separate STL file, and assemble them in my 3D printer software (Object), the alignment of different parts is lost.
If I save it as a single STL file all the objects are grouped, and I cannot select them individually to assign them different properties.
I am using Autocad 2012 student version, and it does not allow me to select any option at the moment of exporting the files.
I have this problem with my drawing. before I decided to post here, I first ask mr. google about the problem but to no avail. anyway, here's my problem:
I have this drawing. 3d object. with multiple items. and would like to create a 2d detailed view of the items.
what i did was isolate the first item and did the base view command. after the command, I then hid the first item and isolate again the second item. but then I always get this pop-up menu that says "A model has changed" and my item is missing. I ignored the warning and poceeded with my second model and so, on. after the process I unisolated all my items and most of the drawings are there and some are lost. Is there a proper way of doing this base view for multiple objects without disrupting the previous drawing that I objects?
My question is, if there any tool /command, utility in autocad to select all objects of one type at one time : for example all text objects or all dimention objects if these objects on different layers and have different properties. in my work I have to insert many blocks(not annotative) or parts of drawings which were created by other people and have different from mine settings and properties of text and dimention objects. the insertions add so many layers and objects that I spend lots of time to correct them and to figure it out.
is there any way( command, utility) to select and manage all of these objects at one time?
P.S.i think it is very unconvenient that the plain autocad does not have dimentions and text as families or some sort of groups that s easy to manage.
can't select multiple objects with the grip, it work previously until someone change the variables.
View 4 Replies View RelatedIs there a way - or 3rd party app or lisp- to change the width of multiple Mtext objects all at once? I have several drawings where the width of all Mtext objects is 1.25, and I would like to change all of them to 1.
View 8 Replies View RelatedI have been using AutoCAD 2010 for a while now and then all of a sudden, I am unable to select multiple lines. The only way to select more than one line for a command is to hold down the shift button and then select more lines. I think someone was playing around with the computer and must have changed a setting?
View 7 Replies View RelatedI am attempting to do a macro that will allow me to select multiple objects and then move them in only ONE axis. For example, If I want to move a wall, the door and the window in the Y axis to align with another wall across the hall. I have attempted to do this in a button macro, but so far its limited. Here is the macro
^c^c_move;\.xz;@;
This will allow me to click the customized button, then select ONE object by a displacement, and it will only move it in the Y axis and allows me to choose the point with a mouse click of the final location.
When I try to select more than one object, it kicks me ahead in the commands and prompts for (needs Y). how I can figure out the correct macro?
Is there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
Question - Are you the Common Denominator?
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
I've got a problem with some of my text's in Autocad. From the screenshot you can see some different texts, theese are copied by their content and pasted manually.
Now, ive got to change the content of theese, and i dont want to do that 1 by 1. Is there a way i could edit for ex. all my YV-E-------------1H at the same time?
I have a .stp file that I am trying to dimension on a drawing. There are about 100 or so lightening pockets that are all the same basic shape (a rectangle with a full round on the ends). As of now I have been manually making a table for each location. Is there a way to create something like a hole table to automatically capture the locations of the pockets and create a corresponding table? I know I can create a centermrk on the round portions to use with a hole table but I want to dimension from the center of the pockets for the table.
View 5 Replies View RelatedI have a library of dynamic blocks that we use for various systems. Each dynamic block has roughly 50-100 visibility states. Sometimes I need to use previous drawings for a new phase of work and the symbols that were previously new are now existing and need to have the letter "E" next to it to indicate as existing.
Currently I have duplicate dynamic blocks for "existing" and "re-located" blocks. This seems redundant and would be much more logical to select a number of devices and simply change a visibility to either new, existing, or re-located. However, I cannot think of how to do this unless either with an attribute or a second visibility pulldown.
I want to create a space style similar to BOMA with editable boundaries to use for LEED Daylighting calculations. I figured out how to make a new property set definitions, new space style, etc., but I can't get the boundaries to read as the LEED boundaries. I want the Base area to remain as is, but I want NET to be Daylit, Useable to be Sidelit, and Gross to be Toplit.
I could do the workaround and just use the OOTB BOMA style, but then others editing will have to constantly translate which means what as we edit the drawings. When you look at the display display Properties for the space style, the boundaries and hatches read as net, useable, etc. I can't figure out where to redefine those and when you right click the space and Edit Boundary, I need to be able to display the correct properties, not the BOMA properties.
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
How to group similar layers and nothing solved my problem.For exemple: I have 3 layers.
-Glass 1
-Glass 2
-Glass 3
All of this layers are blue, and have the same characteristics.I want how i can grouping this 3 layers in only one.
How to compare two similar solid model and found where its differetiate is, and how to compare two similar drawing let say rev.1 to rev.2 and found where its differentiate is?
View 1 Replies View RelatedHow to use the command “select similar” to be applied on a selected part of the drawing? I wanted to use the “select similar” command to select all the columns for a particular drawing on the file but not in all the existing drawings. This is why I number obtained is 60 columns not 20!
Then how to choose the “window selection” in which the “select similar” command is applied?
how do you get similar color for objects in different pictures.
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
I have tried duplicating layers and it just replaces the whole image, it seems to work using levels layers but not the other layers ... I have 30 more images to do and would ideally not like to adjust all the images manually ? I dont mind doing minor tweaks. Essentially all the images where taken with the same camera and lighting and lens's ...
When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
Is there a way to select similar objects (by stroke color) programatically?
View 3 Replies View RelatedI found Oberon Fit Objects To Path as a very interesting macro and i tried to download it.I have downloaded the zip file from Oberon website , but an Error showed up on my screen saying: "Unable to find CorelDraw x5 installation"...
I know the reason for this is because of the x5 version, which i don't have in my system.But i have also downloaded some other macros that are x4 or x5 versions and they are working excellent on my CorelDraw x6.
Any other macros similar to the "oberon Fit Objects To Path" macro?
I have one layout. On that layout I want to have 2 viewports. I also have ssay block A and block B I want to insert.I would like Viewport1 to display block A and viewport 2 to display block B.
What happens to me is when I created Viewport 1 and inserted block A. I go on to create viewport 2. But viewport 2 displays only block A, which I cannon delete to insert block B.
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
View 1 Replies View RelatedI am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedImagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View Related