AutoCad :: Can't View To Scale In Page Space
Aug 14, 2013
I have Cad 2013 for mac.
Problem 1: I can't view to scale in page space.
Aim: Plot 1:50 at A1 page size.
Notes: I am plotting in page space. The page set up is at an A1 page, . I have created new viewports and tried to change the scale inside the viewport to 1:50 but it blows up the drawing way bigger than 1:50. I have gone through everything I can think of and it does not make a difference.
Problem 2: I can't get it to print the full page layout.
Aim: Print to the printer and to PDF as what is seen on the screen
Notes: I am able to print to the printer at A3 with scale 1:100 but only half of it comes out on paper. Every which way I change something like portrait / landscape or new window selection it prints wrongly.PLUS when I plot to PDF it plots perfectly but the scale is slightly off. It prints out at 1:110 or so, slightly off from 1:100.
View 2 Replies
ADVERTISEMENT
Mar 2, 2012
I have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
View 3 Replies
View Related
Jan 5, 2012
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies
View Related
Aug 15, 2012
Setting the scale in a view port in paper space? 2010
View 3 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Feb 3, 2012
I have an issue with linetype scale. I have a certain part of my drawing with dash lines at a linetype scale of 1000. In Model space it is fine but when I change to Paper Space the lines become solid. I have tried increasing the linetype scale in Model space to compensate for the scale in Paper space but the lines are still solid.
View 7 Replies
View Related
Apr 10, 2013
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
View 4 Replies
View Related
Oct 16, 2010
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
View 3 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
Jun 29, 2013
CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies
View Related
May 14, 2013
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
View 4 Replies
View Related
May 16, 2012
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies
View Related
Apr 19, 2012
When I have placed dimensions in model space with a text height of 2.5 now do I get them to a readable size in paper space
View 9 Replies
View Related
Jul 13, 2012
I set up my paper space to A1 size so i have plenty of room to dimention. However, if i measure what AutoCAD has set up as 'A1' then it is 3.2cm x 2.2cm, the atual size of A1 paper is 59cm x 84cm. If i were to print this page on A1 paper it still comes out the right size on A1. I know it doesnt sound too serious but i would like the paper space in the right scale so i can have my text set to the right hight and my bubble reference boxes the right size for when it is printed. (it also does this on all paper sizes, im just using A1 today)
View 2 Replies
View Related
Sep 23, 2012
I am trying to draw a floor plan, that has one side 90' long. When I change the units to Architectual>inches, and then enter 90' as my line length, the line becomes way too long to fit on the screen. This is clearly some sort of a scaling issue.
View 9 Replies
View Related
Mar 18, 2013
I am trying to setup some pre-made paperspace layouts with legends and details. These will not change from project to project so by doing this ahead of time it can save time provided we can get the line types to display correctly!
How we do things now is we set the global scale factor, GSF, to suit the drawing scale of our floor plan. This is typically 1/4", 3/6" or 1/8" if were working in Imperial units.
The issue in doing this is that when we change the GSF the line types drawn in model space do not display correctly. We could go in and adjust everything manually on each project but this is laborious and time consuming.
Is there a way to set up sheets in paperspace so that they will always display the same regardless of the GSF?
I am using AutoCAD LT 2011.
View 5 Replies
View Related
Mar 19, 2013
I have an old dwg that was scaled 1:500 in model space. I want to make it 1 to 1 in model space, then change it to a different scale in the layout. So in model space, do I just click on Scale then type in 500 and therefore my object should be 1:1?
View 9 Replies
View Related
Jun 27, 2011
I'm trying to plot a set of drawings that need to be set at 1:1. Every time I pick Custom or 1:1 and set it to 1mm = 1unit, AutoCAD immediately switches it to whatever 1:1_6 is, leaving me with a bunch of empty space around all my viewports.
I'm fairly new at using paper space, and I've never used a plot scale that have underscores in them, so I don't even know what they're representing.
View 9 Replies
View Related
Jun 30, 2013
I do most of my stuff on A3 and have my paper space sheets set up for this no problems. When I have my drawing in paper space i usually set the scale to what I want. Now, when I am still in paper space with my correct scale, I want to change to model space and move or position the drawing exactly where I want it on my sheet , without it going out of scale. I have a very sensitive middle button on the mouse, and when I hold it down to move the drawing around, it goes out of scale I want to lock the scale first before moving the drawing around.
View 7 Replies
View Related
Oct 6, 2013
Q1: can you scale your drawings on Model Space?? if so, what command should i type?
Q2: can you scale different drawings (different scale) on Model space?
View 8 Replies
View Related
Nov 9, 2012
Working in acad2011, I have a 3D model and i did flatshot. The obscured lines I chose to be - - - - - (ISO02W100). Now i have to annotate and get my paper layout rdy for printing.
Questions:
1. Is there a way of scaling lines that make up my flatshot image in model space?
2. How can i scale the lines in paper space?
The - - - - - lines just don't seem right in my paper space.
View 3 Replies
View Related
Apr 9, 2013
I have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
View 9 Replies
View Related
Jul 18, 2013
I set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
View 9 Replies
View Related
Jun 18, 2012
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
View 2 Replies
View Related
May 29, 2013
AutoCAD to draw various drawings, my issue to set scale.
1. what are the procedures of setting scale in modal space? say if is 1:1 then how to make 1:2 or how to recognize if someone has set a scale say 1:20 in modal space so that you return it to 1:1?....( here i need the procedures)
2. what is different among the following, one using mm, another using cm and the third one using m when drawing in modal space, do these people face different if they decide to use the same scale in layout to print? say if they us 1:50xp, what will happen, in their output.
View 2 Replies
View Related
Mar 1, 2012
SUBJECT: Annotative Scales.
I have a drawing with a 2 viewing ports
Port 1 is at 1/4"= 1'-0"
Port 2 is at 1/2"= 1'-0"
What should my Annotative setting be in model Space?
View 9 Replies
View Related
Aug 3, 2013
How to make the drawings on scale on paper space.
View 2 Replies
View Related
Feb 23, 2012
I'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
View 1 Replies
View Related
Mar 14, 2013
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies
View Related
Nov 18, 2011
I need to change the hatch size (not the pattern scale or space, juste the hatch size).
Exemple : I have a circle, and a hatch inside the circle. The radius of the circle is 10, so the radius of the hatch is 10 too.
What i want to do is to make the hatch smaller (or bigger) like this : Circle radius : 10, Hatch Radius 5 (or 15).
My first idea was to recreate a new circle with radius 5, and a new hatch inside and then erase the second circle. It works, but not very effective in my case.
So, it's why i came here to ask if there is any solutions to make this faster, easier, without having to recrate another hatch, another circle...
View 1 Replies
View Related
Sep 24, 2012
I'm using mm, and i want to create a custom scale which is not in the list of my standard scale in the viewport properties. If i want 1/200 for example and this is not in the list how do i set the custom scale?
View 4 Replies
View Related