When I am trying to calculate area, i got wrong answer. At very first i thought it calculates area with inches (iam in metric sys), but then i checked options and its answer should be in mm, but I am getting wrong answer. In my object (which is rectangular) there's many other things, like hatch, buildings and so on. Maybe this can abstract for direct answer, because when i draw just a simple square or rectangle.
View 9 RepliesAny good tips when it comes to calculating the area of a floor plan? You are supposed to start measuring from the outermost part of the walls, but when I do that I run into trouble with the porch on the bottom of the drawing and the room on top left.
The problems are basically that the porch is not supposed to be included in the total area, and in the room on the top I end up measuring a small area twice if I start my measuring from the outermost part of the walls. This is not very well explained but I've drawn two red lines on the drawing to try to show where the problem areas are.
How I can calculate my area for different slope regions?
View 7 Replies View RelatedI have a building like this and it has a lot of windows.
I know how to calculate an individual window area by using 'area' or 'ls' command. But this is just partial drawing and the whole building has hundreds of windows and it will take forever to calculate one by one and add them together to get the total area. Is there any way to get the whole area easily?
windows are just rectangles (and solid hatch inside the rectangle).
Any quick way of calculating average Parcel Area? I used to export to LandXML and do an area report in CSV. That doesn't seem to be working for me when I export out of C3D 2012.
The workaround I found was to select all the parcels in Prospector, copy to clip board, paste in excel, find and replace "_Sq. Ft._" with 0, then do the average.
I want to calculate aurface area of iparts automatically. there are about 100 ipatrs and i want to find surface area of each ipart. is there any way that i just click the desired surface and its area is written in some file so that i can just go to the next ipart click the desired surface and its area is written automatically on some file.
Is there some option in inventor to define macro for it coz i hav no knowledge of defining macros.
How to calculate the three-dimensional surface area of a revolved arch (such as attached file) by autocad 2007? such as an irregular dome.
Which software can do the job? Autocad or Matlab software or .....
How to drawing a Pi that used in calculating area, circumference of a circle, in AutoCAD as a technical drawing?
Is there available any book I could find some info regarding Pi in technical drawing?
How do I get Revit to schedule the gross exterior wall area? An isolated wall will schedule OK, but once you join it to another at a corner, the reported wall area doesn't match the exterior wall area.
View 5 Replies View RelatedIm using revit 2012.
I have an 11 floor building I wish to create a gross area schedule for. I have made all the area plans, and they all show up under the Gross Building Area Plans. But when i go to create a Gross Building Area Schedule it only lists 7 of the floors. (Leaves out sub base - Lvl2 and gives Lvl3-penthouse)
Can AutoCAD has the capability of calculating the weight of a solid object for a certain material just Solidworks can.
View 2 Replies View RelatedI received a cross section file that was created in Micro Station and need to calculate the cut and fill of the project. There is no way to get the 3D files the cross sections were created from. Everything in the file is exploded and flat.
I was going to hatch under and above the existing grade to find the cut and fill and then thought about the scale of the cross sections. In model space the cross sections are 1=1 H and 1=10 V. When I do a hatch and get the area it is giving it to me way high. If I just divide by 10 I don't think that is right either since the hatch areas are very irregular.
Scale the cross section vertical down by 10 and don't change it horizontally. I don't know if this is possible.
Somehow set the horizontal and vertical scale and hatch above and under to get the areas. I don't know if this is possible either.
I've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
I am using autocad to find areas of a stream cross section such that when we take a water height measurement of the stream in the field, we can easily get the area from a spreadsheet since the cross section of the stream at any height will be known (once I get done in AutoCAD).
To further illustrate my needs, I have attached a picture. I need all the seperate areas between the red lines (the red lines are equally spaced vertically and have lengths that go end to end to the edges of the stream).
I have been hatching between the red lines and taking the areas of each hatched object. However, this is a slow and tedious process.
Hatching is not the issue because I can hatch multiple objects at once using the create seperate hatch option.
What I need is a way to list all the hatched object's areas into a text file so that I can easily copy and paste them into an excel file. Even if it is not a nice and neat list, I can atleast use a find for "area" to get them into a nice list a little faster.
Is there a command where I can stretch an object and keep its Area. Like a baseball when hit turns into an oval however keeps its same mass.
Not like the Stretch command that infinitely stretchs an object.
Suddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies View Relatedi have a number appear when a get the AREA of the attached rectangles shapes especially when i use SMD ucs.for instance see the rectangle C07 74 X 39=2886.00000000 BUT i get the area like 2886.000000003.why the precisions doesn't all 0...
View 7 Replies View RelatedAutocad 2011 and 2011 LT both give the wrong area for sertain polylines. While Autocad 2005 gives the correct area.
Its terrifying how many official documents may be wrong because of this bug.
I would like to be able to draw squares by the area they should have. So that if I need a square of 50m2 autocad automatically draws a square of sqrt(50) x sqrt(50) Because right now I have to draw 200 squares with 100 different areas and I have to calculate and manually draw each one of them.
View 3 Replies View RelatedRecently, on my machine i have noticed that the print area (layout white space) of my drawing in paperspace moves and re-sizes every time i print.
I am trying to create a template and want everyone to print "layout" as a standard practice. But, if i happen to change to print window and window something off the page the layout space (white area) has now been resized and moved to the area i just windowed.
I want to print something "off the page" this time is no reason to change or modify the LAYOUT area that was initially specified. This never happened before and is not happening to my colleagues, so this must be a local setting.
I have a 3D polyline (blue in attached) for which I am trying to calculate the surface area. I use the area-->object command and get 1912342m2 in AutoCAD 2012. My colleague uses the same command in AutoCAD LT 2009 and gets 1807093m2. Due to the discrepancy, I roughly traced a polyline (yellow in attached) around the area in AutoCAD 2012 and I get approx. 1810000m2 so assumedly the AutoCAD LT 2009 version is giving the correct answer while my AutoCAD 2012 is not!
Why am I getting a different area for the polylines...is the difference is due to it being a 3D polyline? Is there a way I can ensure I obtain the correct area using the 3D polyline?
I have an 11 x 17 border (true). I am printing on an 11 x 17 sheet (true). I have specified 11 x 17 sheet in plot dialogue box.
SO WHY IS MY PRINTABLE AREA 11.5 X 17.5??
i have established LIMITS at the corners of my border. there is nothing else outside the border.
this is for a template. i would like to establish the 11 x17 LAYOUT and lock it in position, never to be changed again. If someone wants to print a portion or outside they can use WINDOW, or EXTENTS, but, when LAYOUT is selected i want to see an 11 x17 rectangle eliminating from the 0,0 point and nothing else.
Plotting to layout (as opposed to extents or window) is infuriating. I cannot get my drawing to center properly within the printable area, and I can find no consistency on how AutoCAD is offsetting my drawing. My titleblock is drawn with a trim line of 22x34". I choose the ANSI D sheet size which is 22x34" and when I preview the plot the bottom left corner is offset from the bottom left corner of the printable area by .25, .25.
If I delete the 22x34 trim line from my titbleblock and replace it with a simple point at the 0, 0 bottom left corner, then when I check the layout and printable area, the point shows up offset from the bottom left corner of the printable area by .0006, .0016. Why is it any different than when a line was drawn? If I delete the point the offset from the bottom left corner of the printable area to the closest drawn element then becomes .0013, .0012.
This is absolutely ridiculous. I want to batch plot and I want to have proper margins, but it seems nothing renders consistently and I am stuck with ill-formatted plots. I would love to batch plot to extents, but as I go through the setup, that is not an option for me, so I appear to be stuck with the layout, which I have never gotten to work properly since it was introduced. What is the trick to make it work?
I am just printing to Adobe PDF with the Acrobat printer.
I've just got AutoCAD 2012 and mkaing some rings, I needed to fit the same textures of a ring of 8mm in a 6mm ring. My problem is that the inside diameter is larger in the 6mm ring, and that's why I can't use the Scale command. Is there a command that allows me to fit all the objects in this area??
Here is the file with both of the rings.
while tracing a plan on Autocad 2010, by accident I clicked on something, or performed some unknown commands. My lines, that were smooth just seconds before, suddenly became really pixelated, as if made of many small segments. And when rendering the plan on pdf, it is still the same, and the lines are really thick. I have checked, the line thickness is on default (0.25mm), but compared to renderings I've done before, this time the drawing has really awful lines.
View 3 Replies View Related I am responsible for populating a database in which one of the fields is the area of individual rooms in a building. The instructions indicated that I was to use polylines to enclose each room / area and to find the area based on these values.
Earlier this year, another student was hired to confirm the measurements on building blueprints. This student took accurate measurements of each room, however instead of correcting the drawings, he simply added override text to the dimensions. Therefore the displayed dimensions are correct but my area values using polylines are inaccurate.
The project that I'm working on includes a number of drawings and close to 1000 rooms. I downloaded a function I found online that allows me to figure out which dimensions were overridden by boxing them in a different colour and I've found that it is a significant ammount.
Is there a way to use these overridden dimensions, without altering the physical nature of the drawing, to find the area of a room?Need to use polylines to calculate area of many rooms. Dimensions have been overridden and are inaccurate. Can i use the overridden dimensions without altering the physical drawing?
Is there any command that the calculated area may appear on the drawing?
or
How can i calculate several small areas in one command only?
When a check area and I start selecting and the "green window " appears it won't let me select more than 3 points
I was able to select multiple points. How can I fix this ?
Instance 1. I have lost the Quick Access Toolbar located above the ribbon to the of the right of the application menu button. I can no longer save a drawing and no longer undo or redo any commands that I need to edit while creating a drawing.
Instance 2. I created a drawing saved it and then later came back to it. Went to Veiw tab then clicked the Tile Vertically button. My drawing on one half of the screen and a blank one on the other half. I X out of the screen and started the drawing once again and the drawing area is now labled Drawing1.dwg with a blue square border around the drawing area. With no split screen. I would like to get back to the original drawing area without the blue border going around it titled Drawing1.dwg. I was trying to use the move command to get my drawing into the empty space next to it.
While I'm in the "selection" mode - and it doesn't matter whether I'm preselecting objects or selecting them under some command - I pick the starting point of selection window and then I pan to another side of the drawing and there I pick the point to close the selection window.
Result: all the objects that I left behind while panning to the other side of the drawing, go out of the selection, so only those objects in the final viewing area stay selected - and it's not what I want... I want to keep all the objects under selection - including the ones that were panned out from the viewing area... I hope you understand what I'm trying to describe here....
I'm quite sure that this worked fine in previous versions, so I'm also pretty sure that there must be an option or parameter that controls my issue - I just can't seem to fint it...
I am using 2012 autoCad. I have created an external MS access database in 2010. I want to map some fields like Polyline areas to DB field. DBConnect wasn't that much usrful to me for external databse.(Or I might be missing something).
Is there anyway that I can map AutoCAD-2012 Polylines to External database field so that updating polyline auto updates the database??