AutoCad :: Alignment Of Text With Any Symmetrical Object
Jun 14, 2011
Autocad 2007
I tried to place the text ABCDE inside of one rectangle (drawn by polyline), in such a way that, the text should be exactly at "Middle Centre" of that rectangle.
I could achieve this 90% purely by my own judgment.
Even when, I tried to draw a rectangle just to touch all 4 sides vertices of the text ABCDE, I could not get any OSNAP points on the text to start a line. Can we treat a "Text" object the way we deal with any other geometrical object - Rectangle, Square, Circle, Triangle or Ellipse?
View 4 Replies
ADVERTISEMENT
Nov 1, 2012
So I have a multi-part solid of a symmetrical object, meaning that some of the pieces on each side are going to be identical (just mirrored). Some objects I would like to keep separate during the "make components" function because of the bends on them.
But for some of the solids, the ones that are identical on each side of the model, I do not want to create a part file for each identical solid. I want inventor to make one .ipt and put it in the assembly file twice (one on each side.)
The work-around is to only make one of the solids into a part then open the assembly, re-insert the part, then re-constrain it.
View 8 Replies
View Related
Oct 9, 2013
I am trying to create a logo with curved text at the top and bottom of a circular image, with spaces at the sides.
So, Curved text along the top of the circle and then curved text along the bottom, alinged and with the same amount of empty space between the text at each side of the circle.
I am struggling to get the text to be symmetrical and aligned evenly
View 7 Replies
View Related
Nov 19, 2013
I have started having issues when creating alignments from objects.
I am building roads from plans for setout on site, I receive 2d linework and need to build the 3d road up. I join the required linework into a polyline so I can make a few checks that the lengths and so on are correct before I continue. Then usually I would just go and make an alignment from the polyline.
e.g. Monday I was setting up 3 intersections and dealing with 6 kerb returns on there. The first 2 created correctly, then when I created the 3rd one I couldn't see it. Then when I did zoom extents it was way off to the left and a mirror of the linework I was trying to create it from. It did it to a further 2 of them and the other 2 came out correctly.
Now it is doing to me when trying to create a centreline.
View 4 Replies
View Related
Oct 13, 2013
I have a data grid view with all alignments included in the drawing file. If I choose an alignment in data grid view, I have Id of that alignment.
I have a button, and I would like that if i press that button then selects that alignment in the drawing(graphic). I would like that there was only one object selected, and if there are more selected objects before,then un-selected them.
I have seen in internet, the code snipset:
"Autodesk.Autocad.Internal.Utils.SelectObjects(objectId[ ] Ids)"
Is it obligatory that objectId be able a List or array?
and
"Editor,SetImpliedSelection"
But I don´t understand them. Are there any full samples about his?
View 1 Replies
View Related
Mar 31, 2012
When i am creating alignment from object(six 2D polylines) it convert first poly line only to alignment.orther polylines show as a alignment ,but can't label or create profile.
View 2 Replies
View Related
Feb 29, 2012
Is there anyway to copy an alignment from one drawing to another?I want to copy the alignment but not have it come in as a alignment just an object line
I don't want to spend the time drawing a PL over the top of it (its a very complex) then copying that.
View 4 Replies
View Related
Nov 2, 2012
I have a problem when i create an alignment with Select Object. The Chainage is not coming properly.
And here i attached the Print screen.
View 3 Replies
View Related
Jan 14, 2013
i am trying to get the coordinate value for the current station in the subassemblies.
i found
Autodesk.Civil.Roadway.DatabaseServices.BaseBaseline.StationOffsetElevationToXYZ(ByRef Autodesk.AutoCAD.Geometry.Point3d) As Autodesk.AutoCAD.Geometry.Point3d
but how you get the basebaseline?
in the alignment object there is no convert station to coordinate only coordinate to station. which is useless in this case.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 2 Replies
View Related
Dec 5, 2013
I am transforming water system components from Autocad dwg files (created in Civil 3d 2013 I think) to a personal (or file) geodatabase in ArcGIS 10.1. I am not familair with using Civil 3d.
I would like to know if there is some way I can export (as ESRI shapefile) AECC alignment objects (waterlines) as lines/polylines and preserve associated data (flow direction and station label info) as field attributes associated with the lines/polylines. I am not sure if there is elevation data associated with the alignments, but would want to preserve that data too if it is available.
Currently working with water system asset inventory mapping and geodatabase design
using Autocad Map 3d 2014 on Windows 7
using ESRI ArcGIS 10.1 on Windows 7
using ArcGIS 10.2 on Windows 8.1
View 2 Replies
View Related
Sep 17, 2013
I am working on creating an alignment from a single polyline. The polyline, which was originally created in Carlson 2012, is a flat polyline that is about 1200 feet in length. When I select it with create alignment from object, it accepts it and seems to work. For some reason though, the stationing is way off --- e.g. the true 50' mark is showing up as 0+04.17 which results in an end station of 0+99.31 on a 1191' polyline.
edit> I also have tried this with a brand new polyline I created in civil3d, same issue.
View 4 Replies
View Related
Oct 25, 2012
is it possible to get the alignment name which the corridor surface is built from when the surface is being data referenced. in other word no corridor as the middleman.
the way i see it is when corridor suface is referenced, it becomes a regular surface and loses some properties such as parent alignment.
i am still using COM. maybe .net can do it? either way works.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 1 Replies
View Related
Oct 18, 2012
Using C3d 2013.
Where do I find the PI data of an alignment object to plug into a mtext Field?
Field Category and Field Name and any other steps to locating it would be useful.
View 9 Replies
View Related
Sep 17, 2012
I work for a very large Electrical company in Toronto and we are having problems with one of our major clients (happens to be one of the biggest design construction companies in Toronto).
They designed the job with Microstation and the contractor and sub trades on site all use Autocad. However we have to edit all the original drawings from the designer with Autocad to do the as built drawings and then transfer them back into DGN for the submittals.
However despite all our efforts every time we transfer them in Autocad the text alignment is off. including the dimensions which for what ever reason show up upside down?
Now we are talking about thousands of drawings here so any easy way to convert files from dgn to dwg and have it work out perfectly.
View 1 Replies
View Related
Oct 23, 2012
When I go into Multiline Text edit, the edit box is vertical instead of horizontal. So, i must edit in a vertical fashion. Upon completion, the text remains vertical and I must take the time to rotate it to horizontal. I do have WYSIWYG checked, but it still goes vertical if it's not checked. Also, it starts out (before editing) horizontal. The font is Ariel. AutoCAD 2010.
View 5 Replies
View Related
May 31, 2012
I created an alignment style specifically to label typical sections. My label style includes a triangular symbol (XSM) and alignment reference text (XSL) attached to the symbol. The label attaches correctly to the alignment geometry points (POB and POE) but the alignment reference text which should call the alignment name instead shows three question marks. At no point in the process am I prompted to select an alignment which is as expected. The label should automatically populate with the alignment name. The label properties indicate the appropriate alignment as the reference object.
Civil 3D 2012 (64)
Windows 7 Pro (64) SP1, 16 GB
AMD Radeon HD 6900
View 2 Replies
View Related
Oct 18, 2005
If a balloon style is set to "Linear" the text in that balloon is automatically left aligned. If a balloon style is set to "None" the text in that balloon is automatically center aligned.
Is it possible to create a balloon with the balloon style set to "None", and have the text left aligned in a drawing document. Typically the balloon text is more that one line . The new line in inserted by pressing ctrl+Enter in the override value of the balloon.
View 2 Replies
View Related
Nov 26, 2011
Is it possible to change the alignment of text within a text area?
By default the text is located top left. Horizontal justification can make this top center or top right, but how about bottom left / center / right or even middle left / center / right?
View 6 Replies
View Related
Feb 27, 2013
I want to make symmetric surface i.e. golf ball with dimples. I found that I can do them by using revolve cut but how can I set them symmetrically on whole spherical surface.
View 5 Replies
View Related
Jul 16, 2013
I have text in a circular shape but how do i place the text inside the part on to the front of the face?
View 3 Replies
View Related
Aug 15, 2013
just wondering if any of you know the command that I can use in order to align my text in papr space. I'm running 2011 and 2013 C3D. I have several callouts that are in a row, and I COULD draw a line straight down and just move them all to it, but that's a very inefficient way of getting this done. At the last company I worked, we had a command in the system simply called LINEUP that would align any text we wanted either horizontally or vertically. If this is a button I can create with code or whatever, I could try to do that too, if necessary. Just might take me a while to do the code, but I know there's a more efficient way of performing this task.
View 6 Replies
View Related
Jun 3, 2012
I am using autocad 2000, 2007 and 2013. Once i placed the arabic text with right alignment in my drawing and save and close the drawing. the same drawing if we open in another session/ system those arabic texts are moved towards left without any reason.
But if we double click on the arabic text, then it sit in correct place. What is the resolution for this issue?
I have attached 2 snapshots for ref. one is correct alignment and other is misplaced.
View 1 Replies
View Related
Jul 12, 2012
I am trying to update the companies linetypes to utilities the text alignment in linetypes added in the 2012 version. I have added the "U" setting to the linetypes, but don't understand why the text is not centering after being flipped. Below is the overhead line:
*OHL,OVER HEAD LINES ----OHL--------OHL--------OHL----
A,2.40,-.15,["OHL",L60,S=.06,U=0.0,R=0.0,X=-0.1,Y=-.03],-.1
View 3 Replies
View Related
Mar 4, 2011
I've created a dynamic block that simply flips a connector input from a connector output. Like This:
Attachment 26540
But if you put more than three numbers after the L- prefix, the alignment gets screwed up. Is there a way to change text alignment in a dynamic block? Or, conversely, what do the Align and Fit justifications do? Could I make those work for this purpose?
View 1 Replies
View Related
Mar 23, 2012
I have a problem with the display of the text string when creating a dimension, been through all the options within the styles manager however no option to display the text to the right of the dim line, it always defaults text to inside the dim line, where the option to toggle alignment of text on a vertical dimension line is ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Aug 10, 2011
When I've mis-aligned a group of objects my instinct is to hit Ctrl+Z and try again but the Object Alignment dialog doesn't appear to be passing keyboard commands back to Xara so I have to first click somewhere in the main window, undo and then re-select the Object Alignment dialog.
Not a huge deal but I've just started playing with Xara and thought I'd document quirks as I discover them, as part of my learning curve.
View 3 Replies
View Related
Nov 10, 2012
In our work we draw many symmetrical outlines. In many cases, chiefly due to space constraint, we draw only half the outline and use a centerline of the symmetry to dimension the part.
Our current method is to use sketches to achieve this. I wonder if there is a way that we can make this linetype available from the styles? Diagram attached below.
View 6 Replies
View Related
Mar 21, 2013
AutoCAD 2013LT
I have a simple little block that has an alignment parameter so I can pop it on a wall, pointing the way I need. I would like to add a line of text that will keep a rotation of 0deg no matter which way the block goes in. I can do it with bedit after the fact, but can I set the block up to insert correctly to start with?
View 1 Replies
View Related
Oct 30, 2012
I'm trying to create an alignment label to display profile elevations at regular stations. Two questions:
1. I use an expression to set the text height. When I add a regular text component in the label this works fine, but when I add reference text I can't seem to use the expression as text height.
2. I want to use an expression to 'Truncate' the elevation, so that 178.35m displays as 78.35. I can't find a way to create an expression to do this (within the Alignment station labels).
View 6 Replies
View Related
May 30, 2012
how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
View 3 Replies
View Related
May 28, 2012
i've made a serpantine curve that starts from one line of alignment and end on the other line.
i wanted to know how can c change alignment direction when these two feature line and alignment meet each other in order to change the alignment path?
View 3 Replies
View Related
