AutoCad 3D :: How To Measure One Line To Any Parallel Line
Jun 22, 2012
I am new to AutoCAD and have been sent a 3D architectural model. I need to find the dimensions of some beams. The measure tool seems only to measure from point to point, and I need to measure from one side (or edge) of the beam to the other. The beams are not along the axes and the ends are not at right angles so there are no points that correspond to the height and width.
In Sketchup, I can easily measure from one line to any parallel line. How can I do this in AutoCAD?
View 9 Replies
ADVERTISEMENT
Sep 14, 2011
in autocad we use offset commend to draw a parallel line to another line what we should we use in Chief Architect x2
View 1 Replies
View Related
Feb 2, 2011
What I have is a shape files that contains the road centreline of a city I am working on. And that shape files also have a data of its road name etc.
I know how to do it as FDO (using map connect). But what I require is an autocad text entity.
I can save the map as a drawing. But what I only want is just a number of road names and they are not adjacent or near to each other so map filtering is not recommended.
So what I did, I add the shape files using map import command and added the road name data. And then, I used the command Annotation and do the "define annotation" and "insert annotation". From here, I am doing fine. I created a text/block annotation that will extract the road name on the imported centreline on the line I just selected.
Now, my problem is, all the text are in just one direction (in my case they are all horizontal). I tried playing the "rotation expression" but still without luck.
how or what "rotation expression" should I use to make the text parallel/along the centreline.
View 2 Replies
View Related
Apr 2, 2012
How to get the “text” or “block” parallel to a particular line?there is more than one way to alight the text with a particular line but wondering if there might be more powerful tools to do so.
“Rotate” and “Align” are possible commands to align the text with particular line. Parallel constrain is another option to do so but will make the drawing “busy” with additional parameter.
Equally, what if I need to make a block parallel to a particular line? In this case, the “parallel constrain” doesn’t work! Just I may take the advantage of “rotate” and “align”..What I wanted to know if there is a more brilliant way to get the“text” or “block” PARALLEL to a particular line with a smart tool.
View 3 Replies
View Related
Dec 14, 2011
if I have two lines which run roughly paralel, but sometimes vary in the distance between them, is there a quick method of having CAD draw a line which is central to the two?
Basically, like an offset, but it would need to offset the line at a distance that is central to the two lines, as and where it varies. IE, you couldnt choose 'offset' and then choose 'mid between two points' because the distance between the lines varies at points..
View 5 Replies
View Related
Nov 28, 2012
I have forgotten how to draw a line that is parallel to a building wall which is not either horizontal or vertical.
View 9 Replies
View Related
Jun 23, 2012
I am drawing a diagram to describe a mathematical word problem. Since it is easier to visualize with a drawing, I want to draw it using the given dimensions. But angles used in the diagram are unknown and are not needed for the answer to be calculated, so the only way to draw this freehand is to guess at the angle resulting in the correct distances to be off.
Here is the word problem: There are two ladders, one 40 feet and the other 30 feet, each touching the base of one of two buildings and leaning against the other building. If the ladders cross 10 feet above the ground, how far apart are the buildings?
So for my drawing, being rather simple considering what AutoCAD can do, results in this:
Can AutoCAD calculate the angle needed to place a line of a given length between two parallel lines that are a distance apart less than the length of the line to place between them, having the endpoints of this line touching the parallel lines, fitting exactly?
For the word problem, the distance between the two parallel lines is what needs to be solved and the math is quite invloved, having to find the roots or solution of a quartic equation. (I have the solution figured out to be 26.03287754 feet)
What I am afraid of is that this would require to program an AutoLISP routine to create a new command that one can call from the command line. I see it using the the measure command with relative and absolute co-ordinates. This may be far from a "beginner" question. I can do this quite easily on a peice of paper: having two parallel lines drawn, take a ruler and placing the "0" mark on one line, then adjusting the angle until the desired length just reaches the opposite parallel line. I used to use this trick quite often when drafting with pencil and paper to divide a distance into a required number of even amounts, so this can't be that difficult to do with AutoCAD!
View 9 Replies
View Related
Oct 12, 2006
Is there a tool where you just click on any line and it tells you how long the line is from end to end?
Basically I am drawing a curvy line that twists and turns here and there, but the line has to be less then so long. So I have to approximate the length by doing strait measurements and multiplying, it's really a pain.
I'd much rather just click the line, and it tell me how long it is from end to end, across turns and rounded edges and corners.
View 8 Replies
View Related
Sep 26, 2013
I need to dimension between the face of a wall and non parallel wall opposite it. The non parallel wall turns a 90 degree corner, and it is at this corner that I want to measure perpendicular to my first wall.
1. Is there a way to dimension between non-parallel walls? When you place the dimension you click on the wall at the location you want to dimension, so I don't see why Revit can't place the dimension at that point. That dimension would be particular to that one point along the non-parallel wall.
2. I got around this by placing a reference plane and dimensioning to that, but I'd rather not do this because then if I hide the reference plane, my dimension disappears.
Is there another work around or am I missing a tool I don't know about?
View 1 Replies
View Related
Sep 3, 2012
I want to start measure command from middle of line and insert blocks on specific distance and leave rest on ends of line or arc.
View 5 Replies
View Related
Oct 13, 2011
i have a photo with a line near a teeth model which i need to measure. i have attached photo to autocad but how can i setup the real world scale so my measurements will be accurate?
2011-10-13 14.03.59.jpg
View 4 Replies
View Related
May 25, 2013
I would like to create something similar to this[URL]...It seems to be multiple outlines of the star
Do you know a technique to do that with Photoshop or Illustrator ?
View 29 Replies
View Related
Oct 16, 2013
I did a parallel line using White Arror Select> Copy> Object> Path > offset. I got the parallel lines but the ends are not opened. It was Mitre selected in the popup box. Here is the image:
View 9 Replies
View Related
Sep 19, 2013
Inventor 2014.
When you measure something with the distance command, according to the type of file, the last zoom you did, your graphic card and probably the speed of the wind, the little red line won't show.
Normally when you measure something, a thin red line is shown were the distance is calculated. But in my laptop, and both pc's of my client, Inventor shows this line only in parts, not in assemblies. I've got a Quadro 2000M, my client got Quadro FX 1700 and 1800, all with the recommended drivers.
So I tried with 3 other laptops. On one of them (with a K2000M) if you do a measure right after the file open, it give you the line, if you zoom with the measure command open, the line disappear and won't show again until you close and open the file again. But if you zoom without the command active, the line is shown normally. But it's not working like that on all machines.
View 2 Replies
View Related
Dec 4, 2009
Any way to build or download a linetype that can display as a thick dashed line surrounded by 2 parallel lines on either side of it?
We use them to denote underground stormwater pipes in our survey models.
Currently I need to manually set each line to a polyline, give it a global width, and then draw a DLINE of the same width from endpoint to endpoint. The down side is that not only is it laborious, I also have to set the Z values to zero, so we lose the elevation feature of the pipe in the model.
Ideally it would need to have enough functionality to alter the spacing of the dashes, and the width of the line.
View 9 Replies
View Related
Nov 19, 2011
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies
View Related
Oct 15, 2013
Is there a way to restrict a dimension line to only measure vertical or horizontal?
I am trying to put in the vertical dimension from the center of circle "A" to the center of circle "B", however, when I select the center of "A" and move to "B" the dimension flips to Horizontal.
Is there a way to restrict this tool to Horizontal or Vertical?
View 4 Replies
View Related
Jul 18, 2012
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies
View Related
Sep 12, 2013
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies
View Related
Mar 26, 2009
I am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
View 6 Replies
View Related
Dec 11, 2012
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
View 9 Replies
View Related
Sep 30, 2013
I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
View 9 Replies
View Related
Jan 22, 2010
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
View 9 Replies
View Related
Aug 24, 2012
I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies
View Related
Jun 28, 2012
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
View 2 Replies
View Related
Dec 5, 2011
I have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies
View Related
Feb 22, 2012
I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
View 4 Replies
View Related
Jun 10, 2011
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
View 2 Replies
View Related
Dec 5, 2012
The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies
View Related
Jun 14, 2012
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
View 4 Replies
View Related
Oct 27, 2009
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies
View Related
