AutoCad 3D :: Command To Extrude At An Angle
Nov 28, 2011Is there a command to extrude something at like a an angle. Im not talking about taper but something that could extrude at an angle.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Extrude / Revolve On Given Angle Around Cylindrical Body
Dec 20, 2012I am really struggling in trying to revolve around cylindrical body on a specified angle. I understand the degrees of rotation angle, but i am looking to revolve or extrude a certain shape for the length of the shaft. Like trying to make a coil or a set of threads.
I have tried to use sweep but sweep doesn't work with two sweep lines.
AutoCad 3D :: Difference Between Extrude And Sweep Command
Mar 8, 2012what is the difference between extrude and sweep command in terms of extruding a close polyline using a path?
View 4 Replies View RelatedAutoCAD Inventor :: Sheet Metal Part - Rip Command / Extrude
Jun 6, 2013I have attached a sheet metal part (2014 .ipt) and am having issues trying to use the rip command, maybe my understanding of the rip command is unclear, and I should probably just create a sketch and extrude a slit.
Using the image below as a reference,
What I want to do is to create a rip or slit from P1 to P2, which will give me face C. After this rip, I want to bend face C at P1 so that it is parallel to face A, leaving face B at its current state.
(the construction lines are from the existing frame that this will be welded to.)
My 2 solutions are to create this slit using the extrude command then fold, or to cut face C out completely and add a flange to that cut edge. I am just curious why the rip command is not letting me create a slit from P1 to P2.
AutoCad 3D :: Angle Command To Chamfer Tool In 3D
May 20, 2011Success using AutoCAD's CHAMFER>ANGLE command to chamfer in 3D? Distance/Distance works fine, but I haven't yet figured out how to use the chamfer tool to put a 30 degree chamfer on a cylinder (or any angle for that matter) by specifying a distance and an angle. Seems like it should be simple, but I always give up and end up creating the tapered edge by revolving a polyline that already has the chamfer, or using the TAPER>FACES tool.
View 9 Replies View RelatedAutoCad 2D :: Change Default Value Of Angle That Is Between <> In Command UCS
Oct 2, 2013How do I change the default value of the angle that is between <> in the command UCS
"specify rotation angle about X axis <180.00>:"
from 180.00 to 90.00
AutoCad :: Draw Angle Using Multi-line Command
Nov 6, 2013Is it possible to draw an angle (eg 50x50) using the multi line command with the internal & external corners of the multi line angle radius?
View 5 Replies View RelatedAutoCAD Inventor :: Set Default Angle When Using Face Draft Command?
May 16, 2013Is there any way to set the default angle when using the 'Face Draft' command. The default angle is set to 2.5 degrees - for my application 45 would be more useful.
View 3 Replies View RelatedAutoCAD Inventor :: Use Rotate At Angle Command Outside Of Custom View Environment
Oct 1, 2012Is there any way to use the "Rotate at angle" command outside of the "custom view" environment?
Is there actually any technical reason why the controls in the attached screenshot are not available in the Studio and normal modelling environments?
AutoCad 3D :: 3DMIRROR Command To Mirror Magenta Box Along Zx Plane Defined By Middle Of Steel T-angle
Nov 13, 2013Why can't I get the "3DMIRROR" command to mirror the magenta box along a zx-plane defined by the middle of the steel T-angle?
First, I use the ZX option, and after that fails to work, I try the 3-point option using a picked first point and two ortho-points to define a zx-plane.
Also, there's some randomness in the sense that some of the time the exact same series of steps will produce the correct result, but not this time, as the video below shows.
[URL]....
I'm also attaching the drawing in AutoCAD2010 format.
AutoCad :: Change Default Drawing Angle From 30 Degrees To Another Angle?
Oct 15, 2008Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies View RelatedAutoCad 2D :: Rotate An Object To Match An Angle Without Knowing The Angle?
Oct 5, 2011Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies View RelatedAutoCad :: Rotation Angle Doesn't Match Angle Inquiry
Jul 25, 2012I have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
View 1 Replies View RelatedAutoCad :: How To Read Angle Of Line And Insert Block To That Angle
Feb 11, 2011Let's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies View RelatedAutoCAD Inventor :: Make One Angle Half Of A Driven Angle
May 26, 2013I have used a driven contraint in a sketch.
Can that also be done in an assembly?
In one assembly I want to make one angle half of a driven angle.
AutoCAD VB :: DXF ELLIPSE Relationship Between Actual Angle And DXF Angle
Jul 6, 2013how to convert "real world" angles of elliptical arcs into those shown in a dxf file?
Say that I have drawn an elliptical arc with its start angle on 210 degrees and an end angle of 324 degrees. The values in a DXF file, for an elliptical arc, have something to do with the contant "PI" (3.14159). I know that a full circle is 2*Pi but how to do this with elliptical arcs!!
Illustrator :: Shortcut To Draw A 45 Or 90 Degree Angle From Drawn Line On Angle?
Nov 13, 2013Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
AutoCAD Civil 3D :: Angle-distance With Vertical Angle And Distance
Nov 19, 2012I would like to draw a smiple line using the transparent command 'AD (angle-distance).
My distance is not horz., so I want to enter the Vertial angle and the slope-distance, in LLD the command was AD VD.
So how do you do this in Civil 3D 2012.
AutoCad :: Drag Command From Command List Pane To Quick Access Toolbar?
Apr 18, 2011AutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Annotation Command Set Correct Layer For Duration Of Command
Nov 21, 2010I am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
AutoCAD 2013 :: Get Message Unknown Command When Running Any VBA Command
Jan 4, 2014After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedAutoCAD .NET :: Send Command Executes After Exiting Command Method
Apr 23, 2013I used send command for Export Layout..But the line only executes after exiting command method.
View 9 Replies View RelatedAutoCAD 2013 :: Command Line Appears Again After Plot Command?
May 15, 2012I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
AutoCad :: Command To Save File With Specific Name Using Single Command?
Oct 24, 2011I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View RelatedAutoCAD 2010 :: Command Not Showing Up In Command Line
Nov 27, 2012without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
AutoCad :: Execute Line Command Like A Single Command?
Oct 27, 2013line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedAutoCad 3D :: How To Extrude In Both Directions
Aug 12, 2011How to extrude in both directions in autocad, to keep object symmetrical
View 9 Replies View RelatedAutoCad 3D :: Extrude Along A Taper
Jun 1, 2011I have a hat section brake shape that I want to extrude along a taper. But so far when I try to do this I don't get the results that I want. When I chose EXT, then "T" for taper and put in the angle of 9° and a length of 12, I get a very short piece which tapers in the wrong plane.
View 9 Replies View RelatedAutoCad 3D :: How To Extrude Text
Nov 27, 2013How I can extrude this text in AutoCad2006 . I face a problem when I try to extrude text in AutoCad
Here is a AutoCad file with text , can extrude 30 mm
(Note : that text is not English language )
AutoCAD Inventor :: Extrude To Length
Sep 4, 2013I'm making a tube that is connected on another tube. I did this by skeleton modeling, for my tube extrusion i used Extrude To surface.
Is there any way to get the length of that extrude?
I know its possible to get the sweep length like this. Is there a way to get the extrude length as well?
'Set a reference to the active part document
Dim oDoc As PartDocument oDoc = ThisApplication.ActiveDocument
Dim oDef As PartComponentDefinition oDef = oDoc.ComponentDefinition
Dim opath As Path opath = oDef.Features.SweepFeatures.Item("TheSweep").Path
Dim TotalLength As Double TotalLength = 0
[Code]....
AutoCAD Inventor :: Cannot Extrude 2D Shape
Oct 10, 2011I cannot extrude a 2D shape that is drawn by lines.It appears to be linked but is not .I can see the problem saying not a closed loop or a constraint but don't know how to fix it.
View 6 Replies View Related
