i m designing a jali that has one panel and rest other mirrored of that particular module, but when i do reference editing of one module, other disappear since i'm editing one block. when i exit the refedit command those blocks appear again. is there any trick to enable view of all the similar blocks while i do refediting of one block?
View 9 Replieshow i can add .net code on reference editing and refedit command.
View 4 Replies View RelatedWhat is the variable I need to change in order for the text I'm editing to stay at the actual orientation and size.Right now it gets bigger and changes to horizontal.
View 9 Replies View RelatedI am trying to create one pluggin which can handle inplace edit [refedit]. I can open in place edit window by invoking 'REFEDIT' command from my pluggin. But i need to get the selected document path for in place edit.
View 5 Replies View RelatedI've just upgraded to ACAD 2012 from 2009 and have copied over my CUI settings and getting different results when Double clicking on regular ( not Dynamic ) blocks. The macro for this i've set to ^C^C_refedit.
This previously would automatically select the NESTED block in the list of reference names if double clicked on in the drawing, however now in 2012 the parent block is always selected and i need to hunt through the list to find the actual nested block that im wanting to edit.
Is there a setting / variable that has changed in the upgrades? I have Automatically select all nested objects selected in the Reference edit dialog box and all other options match my 2009 as far as i can tell.
AA 2012 - The REFEDIT window is missing, which means I cannot add a subtract objects while editing a block, I can save and close the block by Right Clicking menu, but the window is nowhere to be found!
Do I need to modify the CUI?
Almost all of our blocks have dynamic properties and I've made a number of lisp commands that use this info.
How do I stop someone from using refedit command on dynamic blocks? I have a problem with one guy. I've explained to him many times to use bedit command or come see me and I'll modify the block. He continues to use the command
I do not want to use lisp to ruin his day... but I will if this continues. Any setting I can use to stop this and keep me from going to a dark place
Whenever I edit a block using Refedit, Autocad seems to want to switch on the grid. (which if fine although a bit annoying) what really gets me is when I leave Refedit I’d expect it to turn the grid off again and restore the setting to the way they were before Refedit. But instead the grid remains still on.
View 2 Replies View RelatedI used refedit to freeze a couple of items that were nested. My drawing file/machine locked up when I attemped to freeze them. I had to reboot, when I opened the file again I was still stuck in refedit mode. I cannot use refclose to get out our that command. It wants me to use refedit again. I need to get back to my work.
View 4 Replies View RelatedHow does one prevent copies/other instances of same block from being hidden when REFEDITing block?
View 1 Replies View RelatedI have opened a block to add a quick leader only and when I tried to close I got the message cannot save back ... (see screenshot 1) when I hit f2 the problem is shown to be a missing application reference (see screenshot 2).
This may not seem a big deal but the problem actually occurred after about 15mins of editing a block and it has taken me about an hour to figure out what the culprit was
Can you edit a block in place (refedit) without changing globally and without exploding within that drawing?
View 6 Replies View RelatedAfter closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedHow do you add a display component to a display?
For example, Stairs have a stringer componet in plan display configuration but does not have a stringer componet in the Low Detail configuration. I need the stringer to show when I go to low detail how can I add a stringer componet in low detail.
I am currently writing a book that will initially be sold as a PDF but may later go on the i Book store, however I don't have a Retina display myself and what is the best practice for making screenshots from a normal display look acceptably sharp on a Retina display?
I have Photoshop along with the iOS simulator that shows how the iPad or iPhone will look if they can be used in some way but I mainly need to get menu items and dialogue boxes from various applications in OS X and Windows looking good on Retina screens. I really don't want to pay out for a Retina display purely for this task that would only take a few hours of work at most.
Sometimes this happens. At other times nothing will display at all. I have also had a portion of the picture duplicated multiple times on the stage.
View 4 Replies View RelatedNew to this video editing game, just have a question regarding 4.3 and 16.9. i have a Canon XM2 which has a setting in the menu for 16.9 wide screen format. When this is selected on the camera the view finder shows a distored image (squshed). I have also found a setting that when 16.9 is turned off you can display 2 horizontal lines on the display. my question is am i better off shooting footage with the 16.9 turned off on the camera and then using Videostudio pro x4 to create the 16.9 format(if this can be done).
View 1 Replies View RelatedQuick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.
View 4 Replies View RelatedNOTE: This is in AutoCAD 2002.
I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.
The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."
This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):
I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:
In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."
Even though my dimensions are accurate and visible within the drawings I cannot get them to print? AutoCAD LT 2012.
View 1 Replies View RelatedI was entering some notes, with fractions, in a M text window. The popup that opens when entering fractions asking how you want to display the fractions. I accidentally turned it off, how do I get it back?
View 2 Replies View RelatedI'm trying to import a pdf underlay in AutoCAD 2012. However, every time I have imported it, the frame of the underlay shows up, but the pdf itself doesn't show up.
Contrast = 100
Fade = 0
Monochrome = No
Show underlay = Yes
Path is correct
I've tried importing image underlays (PNG files), and they work fine. Also, the pdf file is pretty big (about 100 MB), so I didn't know if that affected its ability to display.how to get this to show up?
I just got ACAD LT 2012 and am trying to set it up for a two screen displayI'd like to put all the icons and command line on one screen and use the second screen exclusively for the paper/model space.
How do I achieve this?
I'm trying to import a pdf underlay in AutoCAD 2012. However, every time I have imported it, the frame of the underlay shows up, but the pdf itself doesn't show up.
Contrast = 100
Fade = 0
Monochrome = No
Show underlay = Yes
Path is correct
I've tried importing image underlays (PNG files), and they work fine. Also, the pdf file is pretty big (about 100 MB), so I didn't know if that affected its ability to display. How to get this to show up?
A dwg obtained and developed from autocad 2009 was opened with autocad LT 2012 but could not display on the LAYOUT, although it does show on the MODEL.
I have tried to SAVE AS using the 2012 Autocad LT, but the drawing still wont display on the LAYOUT.
The undefined areas of a slope map now have a hatch to them and are plotting black. This map was created a month ago in 2012 without issues, upgraded to 2014 and now the undefined range has hatch!
View 8 Replies View RelatedWith standard CAD objects it is possible to control their display on a per viewport basis by using the layer manager and freezing any unwanted layers in a particular vport.
I'm having trouble controlling the display of FDO objects from an SDF file in the same way though.
How do I get rid of this "pin point" in my display. It shows up when displaying an isometric or perspective view. I would like to make a nice screenshot without it. There must be a variable somewhere?
View 2 Replies View RelatedAttached is a drawing containing a big rectangular lwpolyline and two relatively small lwpolylines near the drawing origin. One of these smaller plines is on a layer that has a dashed linetype associated with it. That layer is also red. When I zoom in on that pline, however, I won't see the dashes unless or until a regen occurs. As of this writing, after trying a few things, I'm almost resigned to including a note telling the client they might have to REGEN in order to see non-continuous linetypes display properly.
View 2 Replies View RelatedI get a display error during the execution of some of the commands used in AutocadLT with Windows 7. It occurs when I choose a command along the bottom of the display area just above the command window (offset seems to be the worst offender. As soon as I choose the command, the computer locks up for a second or two then the screen goes black. Most of the time it will come back with a white screen in the rawing area and I will have to use the regen command to continue editing. it will sometimes do this numerous times before I can complete the command. (offset).
The error displayed from the task bar is:
Display Driver stopped responding and has recovered
Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding adn has successfully recovered.