Whenever I edit a block using Refedit, Autocad seems to want to switch on the grid. (which if fine although a bit annoying) what really gets me is when I leave Refedit I’d expect it to turn the grid off again and restore the setting to the way they were before Refedit. But instead the grid remains still on.
View 2 RepliesI am trying to teach myself how to use 3D and when trying to chamfer my objects, the chamfer works, but it leaves the original lines.
I have it set to TRIM under the CHAMFER command. My TRIMMODE is set to 1. I don't know what else to do.
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
I am trying to create one pluggin which can handle inplace edit [refedit]. I can open in place edit window by invoking 'REFEDIT' command from my pluggin. But i need to get the selected document path for in place edit.
View 5 Replies View Relatedi m designing a jali that has one panel and rest other mirrored of that particular module, but when i do reference editing of one module, other disappear since i'm editing one block. when i exit the refedit command those blocks appear again. is there any trick to enable view of all the similar blocks while i do refediting of one block?
View 9 Replies View RelatedI've just upgraded to ACAD 2012 from 2009 and have copied over my CUI settings and getting different results when Double clicking on regular ( not Dynamic ) blocks. The macro for this i've set to ^C^C_refedit.
This previously would automatically select the NESTED block in the list of reference names if double clicked on in the drawing, however now in 2012 the parent block is always selected and i need to hunt through the list to find the actual nested block that im wanting to edit.
Is there a setting / variable that has changed in the upgrades? I have Automatically select all nested objects selected in the Reference edit dialog box and all other options match my 2009 as far as i can tell.
AA 2012 - The REFEDIT window is missing, which means I cannot add a subtract objects while editing a block, I can save and close the block by Right Clicking menu, but the window is nowhere to be found!
Do I need to modify the CUI?
Almost all of our blocks have dynamic properties and I've made a number of lisp commands that use this info.
How do I stop someone from using refedit command on dynamic blocks? I have a problem with one guy. I've explained to him many times to use bedit command or come see me and I'll modify the block. He continues to use the command
I do not want to use lisp to ruin his day... but I will if this continues. Any setting I can use to stop this and keep me from going to a dark place
I used refedit to freeze a couple of items that were nested. My drawing file/machine locked up when I attemped to freeze them. I had to reboot, when I opened the file again I was still stuck in refedit mode. I cannot use refclose to get out our that command. It wants me to use refedit again. I need to get back to my work.
View 4 Replies View RelatedHow does one prevent copies/other instances of same block from being hidden when REFEDITing block?
View 1 Replies View RelatedI just purchased the new ACAD2014. It works fine but every time that I launch the program the opening screen shows a grid and I have to turn it off. Is it possible to start up without the grid.
View 2 Replies View RelatedI have opened a block to add a quick leader only and when I tried to close I got the message cannot save back ... (see screenshot 1) when I hit f2 the problem is shown to be a missing application reference (see screenshot 2).
This may not seem a big deal but the problem actually occurred after about 15mins of editing a block and it has taken me about an hour to figure out what the culprit was
Can you edit a block in place (refedit) without changing globally and without exploding within that drawing?
View 6 Replies View RelatedI have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid on top, with 2 meter between grid lines according to plan scale.
View 2 Replies View Relatedhow i can add .net code on reference editing and refedit command.
View 4 Replies View RelatedI am using AutoCAD 2013 - Educational Version, and I want to convert my linework into a column grid. For some reason the COLUMNGRIDADD command is not being recognized by the program. When I type it in the command line, it just says Unknown Command.
Additionally, my Build Panel is missing from the ribbon, which is the other source for the column grid tools. I tried to reload or change the CUI, but so far this has not been successful.
I cannot seem to make the clng-grid appear on the "sheet." It is visible in the construct, and the view, but nothing I do makes it appear in the sheet once the view is placed.
I did modify Display Manager to show the grid on "medium detail" along with the other floor plan items in all 3 DWG's. Works fine in construct and view, no joy in sheet.
It won't even appear when I flip the vport to "reflected" or "reflected screened."
In 2010, I thought I remember the grid snap would automatically turn off when I was in a command for selecting stuff, then after completing my selection, the grid snap would automatically turn back on. For instance, if I wanted to isolate a layer, with grid snap on and set to 1/2x1/2", the object I would try to select would be in the middle of all the grid points and my curser would just jump around it. I'd have to F9 to turn off grid snap, then turn it back on when I was done selecting.
View 3 Replies View RelatedI have a drawing of Clock Face here (see the picture below), which requires donut for the outer circle. My first question is, looking at the picture, what would be the limits, grid, and snap settings? I made an attempt with the limits (0',0') (12',9'), with Grid =0'-0 1/2", and Snap = 0'-0 1/4", but it didn't work out well. I tried to make the Snap 0'-0 1/32" but it couldn't, neither 0'-0 1/16", nor 0'-0 1/8". Why can't I set the Snap to 0'-0 1/32"?
Next, I would like to know how the outer circle could be constructed with donut. The small inner circle below it is of 1'-11" + 1" + 1" in diameter, that is, 2'-1". If then the Donut (as shown) is to be of 24" inside x 1" thick, the 2'-1" DIA circle would disappear within the thickness of the Donut, leaving no gap between them both. How could this be drawn,
With AutoCAD 2013 for Mac, is there a way to change the snap/grid icons to words? In older versions of AutoCAD you could rt. click and toggle "use icons" on / off.
View 1 Replies View RelatedConstructing a grid (centers) with letters and numbers,I follow to set a grid for a plan (All what I need here is a lisp file that provides serial numbers and letters for the grid):
-Grid (centers) are provided to the existing columns
-Circles are plot at the end of these centers to accommodate labels
-Numbers & letters labels are provided
-Numbers and letters are edited to put them in serial order. Here is the issue, as serial number and letter is done manually, then this is a source for errors!
The attached lisp file does do this sort of work but doesn’t allow choosing the direction of numbering lettering! In the same plan, if I need to have the numbers to start from right (instead of starting from left) then this is impossible using that lisp. This is the only part of the code that needs to be enhanced. Also, the “auto number” command does the same thing but work with numbers bit not for letters.
After upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.
View 1 Replies View RelatedWe are having an issue with profile grid shooting off to the left of 0+00 rather than starting at 0+00 and stopping at the end of the profile. There is nothing in the settings that I can find that is telling the grid to extend close to 2000' to the left. Three of the four profiles are doing this. One of them displays correctly, but there are no differences that we can find in the settings.
View 7 Replies View RelatedIf you can see it in the image below, I am showing my minor grids with a dot linetype. I have a total of 6 profiles all of which appear to have the dots double up in random areas, they also print like this.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Every tine I open 3ds Max, I see a white screen in the views:
Where is the grid? What to do?
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedUnderstanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
How can I break a line without leaving a gap?
View 4 Replies View RelatedI've placed the Multi-Segmented Grids in my large project that requires (6) dependent views per floor plan. In each of the dependent views, I'm trying to get the grid markers to show at the ends that ~I~ want them to show, but I'm not getting the checkbox.
Is this by design? Or is it a bug?
I would like to export sketches, but leave off the construction lines as they all show up the same in my CAM program. Is there a way to not export the construction lines? Possibly using the "Post Process" options of the Export Options. I am using 2013.
View 1 Replies View Related