AutoCad 2D :: Rectangle Around An Object?
Apr 10, 2012
how to draw a rectangle around the an object such as a spline or is there a way to find the edge of an object on the top bottom and sides, i know snapping to the object works but on complex objects you have to zoom in alot to find the farthest edge on an object, is there a command to find this
View 2 Replies
ADVERTISEMENT
Jan 8, 2014
I have to make a piece of geometry that joins a rectangle peice of duct to a circular peice. It doesn't need to be hollow...the inside will never be seen.
I've tried a few things but modeling isnt my strong suit.
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
View 6 Replies
View Related
Oct 3, 2012
Can this be done in illustrator scripting??
[URL]
creating a rectangle around selected object or objects and set margins...
View 8 Replies
View Related
Jan 9, 2013
I have created a rectangle object with top right and bottom left corners set to 90px. I have an image that goes inside the box in the bottom left corner. The problem is I need the box to act as if it is using "Overflow Hidden" so I can position the image in the corner and have it partially "cut off" to fit the corner but It doesn't seem to be working when I set the overflow to hidden on the rectangle.
Also (part of my previous post earlier), is there a way to add/change the CSS code generated by Edge without messing anything up?I can write this in CSS and add it if I knew where and how (although I'd rather do it within the Edge interface).
View 16 Replies
View Related
Jan 27, 2014
I am no longer able to change size of an object as the size rectangle doesn't surround it anymore when i highlight it.
View 2 Replies
View Related
Mar 12, 2013
Any quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies
View Related
Feb 14, 2011
I have 4 layers (background, layer1, layer2, layer3-text). They fill all 300 x 600 pixels that comprise the .psd/future image. What I want to do is use a rounded rectangle to encompass all of the other layers, so that the surrounding pixels (around the rounded rectangle) are transparent.
I want all of my current layers to be the content of a rounded rectangle.
View 1 Replies
View Related
Jun 28, 2013
I saw that the Rounded Rectangle properties were not available on the regular rectangle (to change corner radius).
View 5 Replies
View Related
Apr 17, 2012
I'm writing an overrule that write some text into a region, but then the text is too long it edged out.
Is there a way to keep the text into the rectangle, with multi line or setting the boundaries or something else?
View 1 Replies
View Related
Feb 12, 2013
I want to draw a Rectangle in autocad Electrical using VB.net. How to draw?
View 3 Replies
View Related
Oct 8, 2011
I want to achieve exactly the same thing as shown in this video
[URL].......
I did as instructed and confirmed that I want to transform it to a mesh. But as I proceed and push the Smooth Object button, I receive the following message:
‘A smooth mesh cannot be created from at least one of the selected objects.
Smooth meshes can be created only from 3D solids, 3D surfaces, 3D faces, polygon meshes, polyface meshes, regions, and closed polylines.’
View 1 Replies
View Related
Oct 7, 2013
LSP routine or some easy way to take any given rectangle and divide it into "x" number of rectangles?
I can run a Macro to accomplish this, but ONLY if the rectangle is of the same dimensions as set up in the Macro.
What I am looking for is a LSP or something else that can take a rectangle of any dimension, "array" it into 64 rectangles, all having same dimensions, and said 64 rectangles making up the original, larger rectangle. The end product will resemble a grid of sorts, but I need each interior rectangle to be a closed polyline, rather than just splitting the large rectangle with gridlines.
I can do this manually using the array command for each one, but there are several hundred that need broken up, and no time to do it in.
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
View 9 Replies
View Related
Jun 26, 2013
I have to draw a rectangle using ObjectARX but the problem is that i cannot find a method for the task, I found all kind of other methods like Line, Circle, ..... I managed to do it like that:
Point3d pointA = new Point3d(20,20,0); Point3d pointB = new Point3d(40,20,0); Point3d pointC = new Point3d(20,10,0); Point3d pointD = new Point3d(40,10,0); Line line1 = new Line(pointA, pointB); Line line2 = new Line(pointA, pointC); Line line3 = new Line(pointB, pointD); Line line4 = new Line(pointC, pointD);
But I thnk there must be a way to do it more easily.
I am still new in ObjectARX.
View 2 Replies
View Related
May 4, 2012
I am attempted to sweep an arc around a rectangle, but the program will only let me sweep on three of the four edges. Model and pic attached.
View 9 Replies
View Related
Sep 23, 2011
I want to fit a sketch that is to be laser cutted. i wanna fit 30 pcs on a rectangle, is there a tool who figures out the most optimal way to fit them in a rectangle?
View 3 Replies
View Related
Jun 2, 2011
Using autocad 2008. I cant draw a rectangle using 2 points. I don't need a specific size just want to put a box around text. I used to pick a point and then pick point 2 to draw rectangle. On this computer when I use rectangle it ask for length and then width. Is there a system variable that won't let me put in p1 and drag to p2 to make a rectangle?
View 9 Replies
View Related
Jun 11, 2012
Here goes= If i have a rectangle that is 27.125 X 27.5 and i want to chamfer a corner, but i also have a set distance(or the hypotenuse) Which is 22. How can i get it to put that angle in there with out trial & error of drawing a 22" long line on a 45 degree angle and moving it till it fits properly, then trimming off the corners... I have tried all the different commands in chamfer, the best i can do is guess at the distance,which is a crap shoot to me.
View 9 Replies
View Related
Feb 13, 2012
Is there an easy way to align rectangle centerlines?
Similarly is there an easy way to align circle centerpoints either vertically or horizontally?
View 8 Replies
View Related
Dec 7, 2012
I am trying to revolve a rectangle around its height in order to get a 3d object but I get a message : "The object should be on one side of the axis." .
View 9 Replies
View Related
Aug 19, 2013
What I am trying to do is drawing a rectangle. But apparently autoCAD is acting up and wouldn't let me draw it. After clicking the rectangle button located at the top, I tried to draw a rectangle in the sketch area and this is what I got.
View 9 Replies
View Related
Jun 28, 2011
Just downloaded autoCAD2012 and am going through some of the new features.
I drew an arc polyline and then drew a rectangle, I then moved the rectangle to sit on the line. Once I move it here it seems to stick to the arc line, so if i move the rectangle, where the line is hitting the shape drags along with it.
I would prefer it not to stick for the time being.
View 2 Replies
View Related
Aug 12, 2012
I am using Autocad 2007 and when I want to select something by outlining it, the area that I outline turns a green color. Is there a way to toggle this feature off so that it does not change color, as in v 2000? Incidentally, what is this feature called?
View 2 Replies
View Related
Jan 23, 2012
im unable to hatch a simple rectangle i found in one of my drawings. uploaded is a problematic portion. i filleted edges but to no avail
[URL]........
View 7 Replies
View Related
Apr 16, 2012
I have a rectangle that is 100 x 144 inches. I need to find out the longest rectangle that I can make from it.
So far, the longest and widest (widest?) that I've found is 147.75 x 30.9 inches. I must hold the 147.75 but I need it to be wider than 30.9 inches. What's the best way to do this?
Here's how I've been doing it:
I draw the block (100 x 144)
I make a circle with a radius of 147.75
I move the center of the circle in various places on the block and find the tangents of circle to block
I then make right angles and see what I've got
There must be a better way to do this.
View 7 Replies
View Related
Aug 29, 2011
I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
View 4 Replies
View Related
May 2, 2012
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
View 5 Replies
View Related
Jul 3, 2012
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
View 5 Replies
View Related
Jul 20, 2011
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies
View Related
Jun 15, 2012
How do I keep the fill ON the object that gets selected so I know not to pick it again as move through the drawing?
How /or/ where can I get a listing of my SetVars.
Running the Setvar (?) command doesnt offer a description for each?
View 1 Replies
View Related
Jun 23, 2013
Let's say I have a rectangle and I want to fill a table inside of it.
The below is the code snippet I wrote.....
Table tb = new Table();tb.NumColumns = 5;tb.NumRows = 40;tb.SetRowHeight(C_height / 40);tb.SetColumnWidth(C_width / 5);tb.Position = new Point3d(ext.MaxPoint.X, total_MaxPoint.Y, 0);tb.Width = C_width;tb.Height = C_height;tb.SetTextHeight(C_height / 40, (int)RowType.DataRow);tb.HorizontalCellMargin = 0;tb.VerticalCellMargin = 0;btr.AppendEntity(tb);tr.AddNewlyCreatedDBObject(tb, true);
Where C_width and C_height are the width and height of the rectangle respectively.
Then, I got the following
The red line is the specified rectangle. It seems like SetRowHeight and SetColumnWidth are not working.
FYI, the rectangle size is around width = 3.5m height = 5m.
View 3 Replies
View Related
Dec 27, 2012
I would like to draw a rectangle of a certain size (150 s.f.) then stretch it from a corner but have it automatically adjust to maintain the size desired. So I would start with a 10 x 15 shape, then have ability to stretch to 12.5' x ? and as I stretch say the 10' width toward 12.5' the other end of rectangle (15) reduces to 12.
View 4 Replies
View Related