AutoCad 2D :: Drawing Chair - Changing To 3D On Using Fillet
Apr 7, 2013I have a problem with a Fillet. Im drawing a 2D chair and when i want to use a Fillet its drawing a 3D ...
View 2 Replies
ADVERTISEMENT
AutoCAD LT :: Trim / Fillet And Extend System Variables Keep Changing
Jun 28, 2013My 2011 AutoCAD LT for Mac just started randomly changing the trim, fillet, and extend variables. I looked on other posts and learned how to change them back to the default settings. Since then they keep changing back every few minutes.
Specifically, the TRIMMODE keeps changing from 0 to 1, and the fillet trim mode keeps changing from TRIM to NOTRIM. One of those settings seems to make the extend command also not work as expected. I've been using this AutoCAD install on this particular Mac for over a year. The only recent change is an upgrade to OS X.
AutoCad :: Create Inverted Fillet Drawing?
May 23, 2013How can I Create inverted fillet drawing describes the required
fillet.jpg
AutoCad 3D :: How To Make Odin Chair
Sep 18, 2013So I am trying to make the Odin chair, but I am stuck on how to go about it. Since its arcs on two places. (It bends, as the same time its round on the side.) I am not experienced in autocad so could be I am missing a tool to make this shape. In 3D max its super easy with the BEND modifier. But need to make it all in autocad this time.
So is there a way to do it ? Any tools I should look at ?
AutoCAD Inventor :: Create A Cut In Back Of Chair
Oct 11, 2011I am trying to create a cut in the back of this chair, I don't know how to make a cut with multiple angles. I attached the back part, all i need to do is figure out the cut in!
View 1 Replies View RelatedAutoCad 3D :: Printing 2D Projection Of Model Chair?
Jun 24, 2012I've designed a flat pack chair in model space...now I'd like to print all the various bits of this chair so that I can transfer the measurements easily onto a plywood board (to build the chair from scratch). I don't have a plotter, but my Canon MP610 can print in poster mode where large drawings can be printed onto a grid of several A4's - e.g. 16 sheets of A4's arranged on a grid 4x4 - enough to print the biggest part of the chair scaled 1:1.
View 9 Replies View RelatedAutoCad :: Print View Of The Joints Of Chair
May 20, 2013I want to print a view of the joints of this chair. I need a section to show through the cut (plane X, 300 units of height).
I go to Layout, have a mview, and on the layout I try to use the section (I tried that button really), but it filters what I choose. Why does it filter the view?
AutoCAD Inventor :: How To Draw Chair Frame
Jun 19, 2013how to draw chair frame like this?what feature should I deal with it.
View 8 Replies View RelatedAutoCad 2D :: Changing Scaled Drawing To From 1:100 To 1:1
May 28, 2012I have a drawing which I need to copy & paste into a new CAD document. It is a base build drawing that has been scaled 1:100 within the model space. I am trying to copy & paste it into a CAD template document however it is not converting the scale 1:1: the scale I want to work in and the selected scaled within the template. Do I need to convert the base build AutoCAD model space to 1:1 and then copy & paste it across?
View 9 Replies View RelatedAutoCad :: Drawing Size Changing?
Mar 26, 2013I just opened a drawing, bound all the xrefs and saved it. I noticed that when I save the drawing in model space, the size is 10mb smaller than if I save it in paper space. This is the same drawing, and all that is changing is whether I save it in model space or paper space.
What causes this? I tried it on 3 or 4 drawings and got the same result - but only when I bind the xrefs.
3ds Max Animation :: Animate Chair With Dummy
Jan 10, 2012I would like to animate the chair with 1 dummy and just have the casters follow and rotate when the body of the chair rotates , instead of keying the casters individually. Is this possible with constraints?
View 2 Replies View Related3ds Max Animation :: Rigging A Chair With Casters
Apr 4, 2012A way to rig a chair and have the casters follow?
Basically, I have one dummy that controls the position and rotation of the chair. As the Chair goes forward or backward, the casters will need to swivel around and would be following the chair from behind. Likewise, when the chair rotates, the casters would swivel and follow from behind. Would this be Wire Parameters?
AutoCad :: Changing Coordinates Of Existing Drawing
Nov 30, 2011I have a drawing at AutoCad and i want to change its coordinate like that
X'= X
Y'= -Z
Z'= Y
I know how to do it with the points (export their coordinates in a text and then transform the text and then import again at an Autocad) . But thus i loose all the line, arcs, etc .
AutoCad :: Changing Text Style In A Drawing
Mar 4, 2012changing text style in a drawing. Let's say there is a drawing where the font style is standard, or the standard is overwritten in the text box (different size or font). I want to create a new text style which uses a new text size and font.
If i select the text which was created earlier and switch text style to the one i just created only the size of the text changes not, and the font remains the same.
But if i enter the text formatting box select the text and in style i select the one i created (even though is already selected) the font will change as well. The problem with this solution is the time needed to change every text in a large drawing.
If i use MATCHPROP the same thing, the size of the text will change but not the font.
Is there a way to change both the size and font of the text fast and easy?
Photoshop :: Change Fabric Swatches For A Chair
May 3, 2008I have a video rocker chair that I need to be able to change its color or its pattern depending on the fabric material I have for the chair. So I have a picture of the Chair and I have pictures of the different patterns (sports teams, hunting scenes, ect.) I would like to overlay the different patterns onto the picture of the chair while maintaining the shadows and wrinkles of the original picture of the chair. I have PhotoShop 10
View 3 Replies View RelatedPhotoshop :: Making A Red Chair Turn White
Nov 4, 2004I have a picture of a red velour colored recliner type chair that i want to make white instead of red. I've been messing with the hue/saturation but cant really get it. The thing is that there are parts of the picture where the velvet texture is naturally darker than the rest of the spots, and to keep the chair looking real and 3d, they have to stay a darker color than the white color I want to make it. but when i use the hue options, it just lightens everything on the chair.
View 2 Replies View RelatedRevit :: How To Make Desk Chair Of Another Color
May 28, 2012The default color of the Chair-desk.rfa under Furniture/Seating is an unusual color, not of a standard office chair color. I was able to change the textile family color of that chair to the Leather - Dark Brown color which is available in the default material library, but I would rather like it to be of a gray color, maybe medium gray or a dark gray. I could not change the color of the seat fabric to gray, at least I do not see a gray leather in the materials fabric/leather library. How to change the color to gray?
View 3 Replies View RelatedAutoCAD Civil 3D :: Cannot See Parts Of Drawing After Changing Views
Aug 15, 2012I am having an issue with a drawing I have been workign on in Civil 3D. In the drawing I have a corridor and many section views thereof. I was performing some section edits and had been working with two model space viewports so I could keep track of the alignment while performing the edits. When I exitd the section editor, one of my two viewports remained aligned to the section of my corridor, though the view had returned to basic model space. When I switched back to a single viewport, I was left with the one oriented to a section view as opposed to my plan viewport. I reoriented the view to TOP only to find that that most of the drawing, at least visually, is missing. A small portion of my corridor is visible, but appears to have been mostly eaten by some digital goblin.
Similarly, only parts of the overlay I had behind the corridor are visible. I can x-ref the drawing into another drawing and everything is visible. I can copy and paste anything I can manage to select in my drawing into another drawing, where it is also fully visible. I have a couple of profile views who are missing entirely, save their axis and band contents, which I can still see. If i rotate the view one way or another, the amount of visible information changes, but I can't get everything back.
AutoCAD Inventor :: Changing Drawing Sheet Size
Jun 14, 2012I have 4 different sized drawing templates made, one each for A,B,C and D size. There are times when I start a drawing on a C size border/sheet and it gets too cluttered as I add views or annotations. Is there any way to insert/change the sheet size to the D sized template without starting over?
View 6 Replies View RelatedAutoCAD Inventor :: Changing Drawing Active Standard
Dec 16, 2008I'm new to the style library and how to take an existing drawing that was created on one standard, and changing it to another standard I just created. The new standard has different dimension styles, text, and layers. I've added all the styles to my style library and I've set the new standard to the active standard in both the styles and standards editor and the document settings. If I create a new view, it comes in on the new standard, but the existing views are still on the old. How to I get the existing views on the new standard?
View 2 Replies View RelatedAutoCAD LT :: Changing Text Style On All Texts In Drawing
May 22, 2012As Topic explains, just realized ( to my embarrasment ) that I have just done every text in an entire drawing with text style "standard" instead of our own "ETR".
There is no difference in font/height/width or anything, reason I need to change it is because we need to send our drawing to our client in .dwg format and he will then copy everything we've done on the drawing and import it into his own drawing. Problem is if he doesn't use the same font as standard style as we do our text might be dislocated in some places.
Problem is many of my texts are attributes within blocks and they need to change too. Any quick and smart way to change every text and attribute on the drawing, nested or not to another textstyle?
AutoCad LT 2014
AutoCAD Inventor :: Changing Part File In Drawing?
Aug 8, 2012Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
AutoCAD 2010 :: Changing Units On A Existing Drawing
Apr 4, 2012I have a venue drawing that is in mm and I need to convert it to ft/inch so I can update and get dimensions from it. Can this be done so when I change the format in drawing units it will update the drawing units?
Current settings.
Drawing units
Length:
Type - Decimal
Percisin - 0
Angle:
Type - Decimal Degrees
Precision - 0
Insertion Scale:
Unitless
Revit :: Changing Line Scales From AutoCAD Drawing?
Mar 1, 2013I made a SitePlan in AutoCAD with all of the proper line scales set, but when I imported the file into Revit, they were all solid lines, not hidden or phantom styles as they should be. I fully exploded the site plan within Revit, but i still have yet to see a possible way to adjust the line type scales. So far it has only been telling me about how to change the line weight, which is not what I'm trying to do. If there is any information i can begiven on whether it is even possible to adjust the line type scale in Revit from an AutoCAD file
View 1 Replies View RelatedAutoCAD Inventor :: ILogic And Changing Scale Of A Drawing
Nov 16, 2010I have a piece of equipment that changes from 24" to 96" with 5 discrete sizes. I am using ilogic to make all the changes required to the part. Any way that I can change the scale of a drawing using iLogic so that it fits better on my drawing and be adjusted every time. I have multiple pages that most of the drawing views need to be changed every time.
View 9 Replies View RelatedAutoCad 2D :: Changing All Colors In Drawing Regardless Of Layer Block
Feb 20, 2012I want to change the color of everything in my drawing except for 3 layers. There are hundreds of layers and blocks in this drawing, even after purging. I want to avoid just exploding everything and putting it on one layer.
I want to change everything to grey except for the 3 layers I'm working in. I'm using ACAD LT so I can't create a script to do the job. The only thing I can think of is going into the layer properties window and selecting each layer and changing the color one at a time.
AutoCad :: Changing MText Defined Width In Drawing
Jul 18, 2012How do I globally change the defined width of a group of mtext entities in a drawing? If I select a few mtext entities that I want to make the same width then go to Properties, the Defined Width box says "varies" and is not editable. Seems like long ago I used to be able to do this, but not now. I'm running 2011 autocad.
View 6 Replies View RelatedAutoCad :: Changing Text Style Of All Blocks In Drawing
Oct 18, 2011we have recently changed our standard text style from ISOCP to ARIAL NARROW. I have a drawing with text in the blocks that is still ISOCP, i would like to know how to change all the block attributes text style in one go.
View 4 Replies View RelatedAutoCad :: Pspace Layer Color Not Changing In Drawing?
Aug 16, 2012I have a file with an x-ref. The x-ref drawing colours are changed and the objects colours are set to bylayer. I am trying to make a point of my drawing darker than the rest and the other areas just faded grey. I have colours 211-217 set to print at a darker colour and different line weights. For some reason though, even though I have some buildings in my drawing set to 214, it is still coming out cyan in my current drawing.
View 4 Replies View RelatedAutoCAD Inventor :: Changing Out VBA Code In Drawing Files
Feb 27, 2012We have about 1000 drawings with VBA code that copies information from the title block into the drawing file custom properties. We have done this to get the information into a ACAD block to meet our clients requirements. It is an autosave routine so it runs whenever the file is saved in Inventor. We would like to make a change to the VBA code so we need to replace the autosave routine in the file with another.
Manual steps are:
Open the file
Enter VBA editor
Delete the autosave routine (without exporting)
Import the new autosave routine
Exit the VBA editor
Save and close the file
I'm sure we would write a routine to do this. However the effort from scratch may be more that just manually processing the files.
Currently running IV 2010.
AutoCAD Inventor :: Changing Part Master View In Drawing
Sep 21, 2011I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium