AutoCAD .NET :: Record History Doesn't Work On Creating Extruded Hexagon
Sep 9, 2013
I am trying to create an extruded hexagon / everyting works...but: after the creation of the hexagon the grips are not available even i added the proper code
(Polygon3d.record history = true)
See bellow my function.
Public Function extrude_Hexagon(ByVal Centre_point As Point3d, ByVal radius_hexagon As Double, ByVal height_hexagon As Double) As Solid3d Try Dim ThisDrawing As Autodesk.AutoCAD.ApplicationServices.Document = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument
[code]....
View 7 Replies
ADVERTISEMENT
Apr 6, 2013
i Have extruded Half the face of a cylinder. I just need to know how to turn the new extruded face into a perfect Hexagon.
View 4 Replies
View Related
Apr 22, 2013
I noticed that the history brush screenshot taken from the fly-out menu (instead of from the camera icon at the bottom of palette) doesn't work. History brush only works if you use the camera icon at the bottom of the history pallette and then select "current layer" for your snapshot from the drop down menu which shows up after you press the camera icon.
View 1 Replies
View Related
Aug 20, 2013
I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies
View Related
Jul 31, 2012
I don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
View 2 Replies
View Related
Oct 29, 2013
I'm making a throttle body spacer in 2013 For some reason I can't get a hole made on the side of the extruded side.I place a general point on a new 2d sketch and no luck.
View 7 Replies
View Related
May 9, 2012
I have a set of Design Drawings on my desk that I need to produce a set of Record Drawings. The Design Drawings are a combination of three original contracts so the file paths for these drawings are scattered thru three project folders. Is there an easy way to create a new Sheet Manager for my Record Drawings. If I open the original Design Drawings and use "Save As" then the drawings being saved to the new Record Drawing Sheet Manager are all tied to the original Design Sheet Manager.
To copy the drawings to the Record folder I will have to open them and relink all xrefs besides having to determine the file path of each drawing to be sure I am copying the correct files to the Record Drawing Folder. Is the easiest solution to use "Save As" and insert a new border with the corrected "Fields' so they are now connected to the Record Drawing Sheet Manager?
View 2 Replies
View Related
Aug 28, 2013
Why is it that when I click in the command line history field (when docked) and roll the mouse wheel I can't scroll it up or down? There is no visible scroll bar until the cursor is moved to the other side of the window (a long way on the 30" display), and grabbing this will scroll the command history, yet the wheel wont work.
If the command line is undocked and the disclosure triangle is clicked to display the history, the scroll wheel DOES scroll the list.
AutoCAD 2014 Win 7 x64
View 8 Replies
View Related
Jul 19, 2013
It's an 8-bit PSD file. One layer (current, preferred edits) needs some pixels from the original (layer 0). I make sure to get just layer0 showing, make new snapshot, mark that for the Hx brush. Target the top layer/visible and go to where I want to repair the pixels. Paint with the Hx brush. NOTHING!
It was occasionally flakey in CS3 and CS5, but this is CS6 and should be rock-solid because I just upgraded.
Win7, maxed on RAM, huge HD, Quad core running at 3GHz each, graphics card enabled etc.
View 2 Replies
View Related
May 4, 2012
Is there somewhere a list of Adjustments/Modes that the History Brush DOESN'T work with?Perhaps I should re-phrase that.I can get the History Brush to work with say Blur but I can't get it to work with Blending modes or a various adjustment layers.
View 9 Replies
View Related
Sep 15, 2011
My company used autocad 2009 and a printing Plug-in which was made by VB,they worked perfect.But when my company uses autocad 2010,the problem rises:The printing Plug-in doesn't work.
Although I downloaded and installed the Microsoft Visual Basic for Applications Module 32bit (from URL....), the printing Plug-in can not work with autocad 2010.the commands from the plug-in cannot be recognized.
Firstly I install autocad 2010,then VBA,next printing Plug-in.Is there anything wrong?
View 5 Replies
View Related
May 8, 2012
(visual studio 2010 c# and AutoCAD 2010 )I'm trying to create a new layer with ARGB color but SetRGB doesn`t work this way.
// Color is a System.Drawing.Color
private static void NewLayer(string layerName, Color layerColor)
{
LY_Rutas = gbl_doc.Layers.Add(layerName);
LY_Rutas.TrueColor.SetRGB(layerColor.R, layerColor.G, layerColor.B);
}
View 5 Replies
View Related
Mar 24, 2013
Everytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
View 1 Replies
View Related
Apr 1, 2013
i am using CAD2010 & VS2012.
start external program done and no problem with attact to process.
i set breakPoints in my program then i loaded it to autocad using netload so this breakpoint doesn't work , and my program complete all code without stop at my breakpoint .
View 8 Replies
View Related
Nov 13, 2013
We have AutoCAD 2014 and 2012 currently in our office. We have a civil file that works perfectly fine with 2014 (we usually save all files down to 2010 so all our consultants can use them). When we open it in 2012 the object enabler does not seem to work only showing empty boxes with AceeLand90 text in the lower left hand corner. The civil object enabler on 2012 is up to date and the drawing was saved down to 2010. Not sure what I am missing and why it doesn't wort to have the Acee Entities shown in 2012.
View 6 Replies
View Related
Dec 6, 2013
I am rehab a part of road, and using overlaymillandlevel 2 subassembly. I'm noted that when existing cross slope past to 6%, corridor is not build like the picture below. understand why this happenning.
View 5 Replies
View Related
Apr 24, 2011
I am trying to follow some directions and the call for a spline to be drawn onto an image. I can only find a polyline which doesnt work like I need it to. As I understand it a polyline will put a curved line as close as it can to a series of points, whereas a spline will "join the dots". I need to join the dots but with a curve not a jagged straight edge.
View 5 Replies
View Related
Aug 10, 2013
I can't use F8 key for Ortho mode in Auto Cad 2012. I checked CUI and it seems to be ok but when I press the F8 key It doesn't work. as matter of fact, after pressing F8 key, line type manager window is opened!
View 9 Replies
View Related
Oct 8, 2008
I can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.
View 6 Replies
View Related
Sep 20, 2012
I have a problem when I want to use a cutout.
My purpose is to get a perforated plate but Inventor doesn't show this.
Only the black color is shown and not the holes.
View 9 Replies
View Related
Oct 3, 2011
I created a paletteset with MinimumSize, it works fine when the paletteset is not docked to anywhere. However the MinimumSize doesn't seem to work at all. I tried to dock it to left, then I can drag the edge to really narrow.
View 1 Replies
View Related
Aug 20, 2013
I'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
View 9 Replies
View Related
Sep 13, 2013
I need to Veto ETRANSMIT in some cases, I stripped down my code to a msgbox that will ask if i want to Veto Or not
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServices<Assembly: ExtensionApplication(GetType(GHATransmit.Initialization))> Namespace GHATransmit Public Class Initialization Implements IExtensionApplication Public KillCommand As Boolean = False Public Sub Initialize() Implements Autodesk.AutoCAD.Runtime.IExtensionApplication.Initialize Dim dm As DocumentCollection = Application.DocumentManager Dim doc As Document = dm.MdiActiveDocument AddHandler
[code]....
Even if the e.veto has been sent to AutoCAD the ETRANSMIT command still continues.
View 2 Replies
View Related
Oct 19, 2013
I made an assembly, inserted a bolt and saved it to another file for thee modifications i make in the screw.
I try to make a section view with one of the origin planes, but it doesn't make
View 6 Replies
View Related
Sep 27, 2011
I'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
View 6 Replies
View Related
Mar 10, 2012
I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
View 6 Replies
View Related
May 16, 2011
I use the command -scalelistedit to clean the strange scale , i do purge , save , close and when I re-open the drawing the bad scales are back
View 2 Replies
View Related
Apr 10, 2013
I am using Autocad 2013 on a 64bit PC.
I saved and run the Civil OE 64Bit. All the items shown have been selected and installed.
I can only see squares when I open a drawings that comes from the civil engineers.
View 8 Replies
View Related
Jan 8, 2014
This is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
View 5 Replies
View Related
Apr 20, 2013
I made 2 parts, c cylinder and a plate with a hole, and tried linked the Diameter parameter in the Cylinder file.
First, i chose the Diameter, in the link dialog box, but the new user parameter that was inserted was the file name only.
Secondly, when i activate the Hole parameter in the plate file and select List Parameters in the Equation column, i see only the Hole parameter, not the new one, the Diameter, which i tried to link.
So, the link doesn't work.
But, i have, also, a general question: why do i see, in both files, in the List Parameters dialog, only the parameters which i changed their names? i expected to see all the parameters of the part, no?
View 2 Replies
View Related
May 18, 2011
I have used the wblock command to block out drawings for use by other companies and was backsaving by using the wblock browsing ellipsis.
I keep getting requests to backsave the blocks again, so this process doesn't seem to work.
View 8 Replies
View Related
