Now I already understand the mechanism of the rubber band, but I’m not sure what’s name of another mechanism
For example, as shown in attachment picture, when copying a circle, then move the mouse, there is a circle in the center of the cross, what I want to achieve is how to let the moving circle come true.
How to move circle -centerpoint- to the middle of distance between two rectangles?
I am using autocad 2013.
Say I have a circle. I want to grab I assume the top anchor point, and drag it down. The resulting shape would roughly be a fat U, or maybe like a mushroom head turned upside down. I thought it was hold spacebar and click but it doesn't seem to be.
View 3 Replies View RelatedLightroom 4.2 Fault Report -- Spot Edit goes into infinite loop using 50%+ CPU -- have to kill the program! Earlier versions AOK. Is there a fix???
It locks up whenever I try to move the 'copy from' circle -- or if I try to select a circle to move it or change its size.
I'm new to Illustrator and perhaps it's not the best software of CS6 Master for doing this, but:
I have a few (13) circles, they are connected with lines (one line from the centre of a circle to the centre of the next one, so 13 connecting lines). I need to move the circles around in order to create the appearance that suits me best, but I want the connecting ending to move together (see picture below). I need to do this often and get an immediate visual feedback. How do I do it? Am I using the wrong software altogether?
I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View RelatedI have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedI try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
If I have a dynamic block of a window. I can move either side of the block but the basepoint doesn't move. Is there a way to move the basepoint as well so its not off in space? or just delete it and have it now shown?
View 1 Replies View RelatedWhen I draw a square and then a line attached to the square and then try to move the line the line the square move with it. How can i avoid that
View 1 Replies View RelatedIn the example below, I would like to select the three dimensions 14'-1 3/8's, 2', 28' and be able to move them all up or down at the same time...how do I do that?
dims.jpg
Trying to lay a dime on a nickel, without the "squares". In otherwords, how do I cut out each coin and lay them on top of each other so each coin shows and isn't hidden by the top coin?
View 2 Replies View RelatedHow to use touch move and mouse move events events to move elements n edge?
View 4 Replies View RelatedSo a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
I am using the trial version of CS5 (probably going to upgrade at the end of the trial), and I've only found one thing about it that I don't like more than CS3. This is VERY VERY annoying, and I'm not sure if it's a glitch, or just a preference that needs to be reset:
When using the move tool, I will move something and it will just snap back to where it originally was. When it snaps back, it might move a few pixels over in the direction I was dragging, but it is definitely not moving to where I want it to go. The only way to get things to move the way I want to is by Free Transform...but it's annoying, when you're trying to design a layout, to have to free transform every element you want to move, first.
I'm guessing that this is a glitch because sometimes it happens and sometimes it doesn't...it's pretty random. I've tried turning Snap on and off, and nothing changes.
What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI made this technical detail. To make an arc I use ''tan, tan, radius'' command. It looks like arc and circle is joined together, but if I move closer as you can see they aren't joined together. So how can I join them? I tried 'join' command but it won't work for me or maybe I don't know how correctly use this commad.
View 8 Replies View RelatedI'm trying to draw an object in 3D view, but I'm having trouble creating a circle in the Z direction. I know how to make circles on the X-Y plane but I can't figure out how to make one in the Z direction!
I'm making I attached a picture so you can see what the object looks like, and more or less the "3D circle"! I also attached the actual AutoCAD file that I'm working on. (The dimensions are 1:10)
I'm using AutoCAD version 2012.
i cant fillet the r21 circle
View 9 Replies View RelatedI am using the "Make Linetype" command under the express tools to make a linetype with a single circle in it, but its not working. I tried making my circle a polygon but that didn't work either. How do I get a circle into my linetype?
View 9 Replies View RelatedI drew 2 circles with ttr command (1 and 2). The problem is when I try to trim them to remove the part I don't need, it doesn't work cause the circles 1 and 2 aren't stick with the borders as they should. At the 4 red circle points, if you zoom you'll notice they don't stick the border, never faced this problem before (usually I cut the part I don't need without problem). I've done regen/all but doesn't seem to fix that problem.
View 9 Replies View RelatedI have a circle which is rotated 45 degree around the X-axis. If you look at it from the top (normal=0,0,1) it will look like an ellipse.
I want to draw a new entity (ELLIPSE) that will have the same shape/look as the circle viewed from the top, but the whole entity must have z=0.
Basically, exactly what the command FLATTEN does.
Is there a way to do this easily? Or is the only way to figure out the math behind it?
I have a little problem with trim in autocad 2012. After trimming some lines that cut through a circle there's a big gap between the circle and line, so there's no way i can create a polyline. How do I fix it?
here is the figure w/o trimming
pic1.png
Here it is after trimming
pic2.png
And as you can see there is space between the lines. How can I get the line to connect to the circle?
pic 3.png
my 2014 inventor crashed and since then when I try to dimension a circle, I get a small "half circle" icon and it dimensions the half circle instead of a diameter or radius. Is there a setting that has changed when I crashed? I cant right click to get any dimension options.
It seems that the diamter dimension works on other things. the part im trying to dimension is a frame generator part. I have dimensioned off of these with no problem.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
I've been using AutoCAD for about eight years now for architectural support in 2D. Lately drawing models for my smaller parts and rendering to get the message across. Problem is rendering. I can never remove the segmenting of arcs and circles even in the highest of setting. Does AutoCAD have fundamental problems with rendering solids? I've used 3rd party programs for rendering also with the same results.
Example of my setting:
Viewres = 20000
Facetres= 10
Whiparc = 1
segments in a polyline curve = 30000
How to draw the involute of a circle?
View 1 Replies View Relatedwhy a circle is not showing the particular linetype (no matter what scale I adjust it to) until I break the circle line?
View 9 Replies View RelatedUsing Autocad 2000LT, Windows XP
1) One circle is inside the other circle, need to measure distance from the outside edge of one circle to the to the outside edge of the larger circle?
2) One circle inside the other circle, need to measure from the center of the larger circle to the nearest outside edge of the smaller circle?
3) Circles are near each other and need to measure from the outside edge of one circle to the outside edge of the other circle?
If I want to draw a 10% slope on 5' contours how do I calculate the circle diameter needed to construct the slope in order to connect the lines where the circles intersect the contour?
View 1 Replies View Relatedhow to create a NURBS circle in AutoCAD?
View 2 Replies View Related