AutoCad 2D :: Why Circle Not Showing Particular Linetype
Apr 2, 2012why a circle is not showing the particular linetype (no matter what scale I adjust it to) until I break the circle line?
View 9 Replies
ADVERTISEMENT
AutoCAD LT :: Linetype Not Showing Up In 2013?
Mar 5, 2013I am currently running AutoCAD 2013 LT on a Windows 7 64 bit system. I was recently running this same software on a 32 bit system computer and everything was running properly. After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.
We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern. After upgrading to the new computer, this linetype only reads as dots, nothing else. I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.
Photoshop Elements :: Circle Boundaries Not Showing On 12
Feb 5, 2014How do I set my brushes / tools .. to show brush size circle boundaries just like every other version of PSE?? all i get is a picture of the icon and no circle boundry. Have not control over my brush.
View 2 Replies View RelatedLightroom :: Map Module Radius Circle Not Showing?
Apr 25, 2012When I create a My Location the radius circle does not show on my iMac running Lion. It shows up on my MacBook Pro just fine.
View 4 Replies View RelatedCorel PHOTO-PAINT X5 :: Eraser And Brush Mask Tool Showing Icon Instead Of Circle Or Square
Mar 1, 2013I must have fat fingered something and I now when I click on the Eraser Tool or the Brush Mask Tool instead of getting a circle or square, I get and icon of the tool instead. They still work but they're harder to use without seeing the circle or square depending on what's selected. I've been using Corel for many years and never had this happen and I can't figure out how to switch back.
View 3 Replies View RelatedAutoCAD 2013 :: Copy Linetype Definition From Drawing To Linetype Definition File?
Nov 14, 2012How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedAutoCad :: Find Center Of Circle Tangent To Another Circle And Point On A Line
Dec 18, 2011I need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedAutoCad :: Drawing A Circle That Is Tangent To Another Circle And Passes Through Endpoint
Apr 28, 2013I was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View RelatedIllustrator :: How To Hide Half Of Circle That Goes Behind Other Circle
Nov 24, 2013I have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedAutoCAD Map 3D :: Linetype Add-ons
Jun 14, 2013I am new to AutCAD and where I can find or purchase line tpes specific to development (i.e. water, san, storm, edge of payment, top of slope, etc).
I do not have time to learn how to make linetypes as I am still learning the basics of the program.
AutoCad :: Create A New Linetype
Apr 2, 2004How i would create a new linetype in AutoCAD LT 2004. For example creating an electrically traced line that is a dashed line with the letter E in the line.
View 6 Replies View RelatedAutoCad 2D :: Make A New Linetype?
Nov 8, 2012I work with a drawing that for some reason don't have a proper fence line in it. I tried to load another .lin file, but still the fence line looks funny. The line I'm after looks and work ok in alla other files but this one!
I tried to copy paste a fence line from another drawing but what's pasted is just half the linetype...
The line should look like this -- / ---- / ---- / ---- but comes in as -- ---- ---- ----
Why do I loose the slashes?
*FENCEONBOUNDARY, Fence on boundary _____ / _____ / _____ / _____
A,.7,["/",STANDARD,S=.05,R=0.0,X=-0.1,Y=-.05],.1
The result should look like ----- / ----- / ----- / -----
AutoCad :: Set Linetype Scale
Jul 15, 2011i set linetype scale in one of the drawing which is lts value is set to 900..when i select line and open option in order to set linetype scale it show the message..
View 3 Replies View RelatedAutoCad 2D :: Create A New Linetype?
Apr 25, 2013I looked through other threads and I still couldnt get it figured out. I am trying to make a linetype like the attached image..
View 7 Replies View RelatedAutoCAD 2013 :: How To Select By Linetype
Aug 14, 2013I am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?
View 2 Replies View RelatedAutoCAD Map 3D :: Linetype Changing Scales
Jun 15, 2012I am using Map 3D 2013
I have several drawings in which I want to use a line type (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the line type is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are poly lines (2d).
I have checked in all drawings that:
global scale factor and current object scale in the line type manager are the same (1.0)drawing units are the same (unitless)‘use paper space units for scaling’ is always deselected line type generation is always enabled.
AutoCAD LT :: Create Linetype With Text?
Jun 7, 2012Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
AutoCAD Civil 3D :: Linetype Scales
Mar 22, 2012my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies View RelatedAutoCAD 2010 :: Non-Repeating Linetype
May 17, 2013Is it possible to creat a linetype that doesn't repeat.
What I'm after is a line consisting of:
Long Line
Space
Short Line (roughly 1/3 length of long line)
Space
Long Line
( ______ __ ______ )
But that is all I want to see, regardless of the distance between the start and end points. I use this a lot for laying out joists.
I know I could make a dynamic block of it, but that would mean streaching every line between the two points.
AutoCAD LT :: Linetype In Model And Layout
Sep 11, 2013Is there a proper way to change the settings so the linetypes in model and layout will look the same? Or do I have to change ltscale?
View 7 Replies View RelatedAutoCAD LT :: Creating A Complicated Linetype
Oct 7, 2011I have recently started using AutoCAD so I'm still figuring it out. I would like to create a line like this
¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯ and another one like this ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ (where the Vs link up with the line).
I have tried to do this through the lin file and have failed. The lines don't meet up, the gaps aren't in the right place and the line does not run along the top but in the middle: I have fiddles around with it but it complicated and long to do. I have also investigated creating these lines using express tools but it seems that this tool is not an option in AutoCAD LT 2010.
AutoCAD .NET :: Linetype Loaded From Which File
Jul 24, 2013Is it possible to find from which linetype file(acad.lin or acadiso.lin) , the existing linetype definitions (CENTER2) are loaded to the current drawing.
We have drawings, some of the linetype definitions are loaded from acad.lin.
Need to reload the linetypes from acadiso.lin.
AutoCad :: Inserting Linetype Files
Oct 15, 2012I have downloaded a slew of AutoCAD linetype files and have tried to "cut and paste" them into my acad notepad with no success - (maybe that's where I'm going wrong, right off the bat). Anyway, after pasting the lines of text into my notepad and saving the updated notepad, I return to AutoCAD only to find that the linetypes are not available for use.
View 8 Replies View RelatedAutoCAD .NET :: Linetype - How To Catch Errors
Feb 8, 2012When I load the linetype file '' Load the Center Linetype acCurDb.LoadLineTypeFile(sLineTypeName, gstrc_SFR_LineType_FullFileName)
How do I detect if the linetype is in the Linetype file? How do I do my error checking here in the ACAD way? Currently I just search the acad.lin or sfr.lin Text File to see if the LineType Exists. This works.
But I was curious how would you check the linetype file via the Acad API,to see if the linetype definition name exists in the file?
AutoCad :: Not Getting Correct Linetype In Layer?
Oct 11, 2012I have a layer that's set up to use dashed lines, but in the drawing it comes out as a solid line.
View 4 Replies View RelatedAutoCAD LT :: Draw A Line With Particular Linetype
Sep 16, 2013In model space I draw a line with a particular linetype, say a fence row, and I adjust the linetype scale so that it reads like I want it, but then when I go to paper space, it's just a plain line no matter what I set the linetype scaling to?
View 9 Replies View RelatedAutoCad :: Basic Linetype Scale
Dec 9, 2011When I draw a line at my template it always has the line type scale 5 as default under properties.
I know that I can chance this by hand or chance a basic line type scale with the command "lts".
But all the lines in the drawings of our partner have the line type scale 1 under properties. So if I used "lts", there would either my lines or their lines be scaled wrong. Also I don't want to chance the default line type scale of each line by hand.
Is there a possibility to set up something that each line I'm drawing, starts with a specific line type scale as default under properties?
AutoCAD Civil 3D :: Reverse A Linetype
Dec 17, 2012I have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----
View 9 Replies View RelatedAutoCAD 2010 :: Set Psltscale Per Linetype
May 16, 2012I am wanting a soultion to a problem I am having when trying to have a combination of linetypes I either want psltscaled or not in a view port.
I.e. I want services linetypes to use psltscale = 1 and I want my linemarking linetypes to use a psltscale = 0, as I need the linemarking linetypes to show in the viewport at the original size they were created at but not the services linetypes as they look horrible.
AutoCAD 2010 :: Create A New Linetype?
Apr 25, 2013I want to create a linetype just like this but cant seem to get it right..
View 3 Replies View RelatedAutoCAD LT :: Batting Linetype Not Printing
Jul 4, 2012We have a number of layers pre-set up to display the batting linetype at various scales:-
However when printing a "25mm" thick version of the batting linetype drawing it prints as a straight line. Our other scales are fine.
The linetype views correctly in model and paper space just not when printing.