I need to integrate dwf files in my web page. There is one more requirement it should fulfill, suppose i want to search for a room in building which has some number or name , i want it be searched in the drawing directly using a query string from the aspx page.
View 1 RepliesI have created a web page which I have created Layer Sets and Layer Comps and it all looks good within IR.
What I want to do is create a single 'image' directory with each of my slices in and multiple html files for each of the 'layer comps'.
changing the font size that's used in the titles and captions of pictures when I create a web gallery.
I'm using LR to create web galleries of my son for my family to see him growing up and I like to use the title and captions to put comments about each picture. Some of the people who view these galleries on-line have poor vision and need to see a BIGGER font. The only font size for titles and captions seems to be embedded in LR and it's mighty small, any way to increase it?
I am a stand alone user and my current task needs a sea bed surface for placing our plants in my Inventor model so that the boss can have a 'realistic view on the site. Nothing fancy, just a surface. Since I am a mechanical draftsman and have no previous experience with GIS data, so I turned to my local software supplier. It went all “OK’ until the last step: bringing the surface file (see 59905_1) to Inventor (see 59905_5). It seems the importing is successful, just no surface shown. Here is what we have done:
Use Autocad civil 3d to create a surface from GIS data.Save the surface file to Autocad 2007 format.Import it to inventor 2012. I have to say the site area is about 1000m x 200m in measurement.
What is the possibility to use LibreOffice or OpenOffice with AutoCAD instead of MSOffice?
I wrote a lisp to import data from Libreoffice spread sheet to ACAD but I could not update this spread sheet by outputs from ACAD.
When placing a new part/assy into an assy, the current assy view rep is assigned to the inserted part view rep where the name convention matches,
But, where other view reps may be present, the place part/assy event does not match up and auto assign other elligable view reps.
How can i integrate an image with the background? (for example, i m trying to integrate the tower to the sky in the BG but i cant do it as you can see the borders).
View 2 Replies View RelatedThere is a revit structures extention that allows integration with civil 3d, but the revit architecture extention doesn't seem to have this. mis there any way to bring in a complete civil 3d model (including corridor profiles etc.) into revit architecture?
View 2 Replies View RelatedI have a set of RAW Presets that I am trying to get to work in my RAW window... They are all in there and I have followed all the instructions that came with the download, but when I go to apply them to an image I keep getting these pop-up blocks!
First, it says to change to '2012' so I do that, and then when I click them again under the 2012 setting it says to go back to using '2010'!!
I want to incorporate a rigged character along with a rigged bike, so that when the bike runs or jumps through a rough terrain, the character will react to it dynamically. The character should be able to move as per the bike's movement, as would happen in real life.The character should react to the suspension of the bike.
Please check out the video for reference.
I was wondering whether one could proceed as follow. Say, you want to make a vector mask of a given image, part of a photograph. One could of course use the built-in vector features of Photoshop (pen tool, vector shapes tool) to create the vector outlines used for the mask. But, it is possible to export the image in Illustrator, use all of the Illustrator vector tools to create the vector outline, and then import those vector outlines back into Photoshop, at the *exact* same place as they were in Illustrator (relative to the image being traced/masked).
I know how to go back and forth between Illustrator and Photoshop, but I don't know how to ensure that the vector paths (from Illustrator) and image (from Photoshop) keep their relative positions between the programs.
I downloaded the trial of PSPx4 and sadly enough the trial does not include Nik's Color Efex Pro 3 (CEP3). What I would like to see, is if the CEP3 window actually fills the screen, or if it is smaller and the user unable to "maximize" it.
View 4 Replies View Relateda look at 3d text integration techniques inside of action [URL]....
View 2 Replies View Related1. Is it possible to read excel files through script files.
2. Can I declare variables in script files.
I have loads of dwgs made by a former employee at another site that have our company logo in the tile block. I need to replace the company logo with a new one. If it were not made from a dwt, I could change the .dwg file and just reinsert the block and let it redefine the block, done. But since all of the text in each drawing was input using a template, I cannot do this without losing all of that data. We are not permitted to explode the title block, delete the old logo & add a new one as the drawing format needs to remain as one entity. Is there a way to automatically update these dwgs without re-entering all of the title/revision block text on every drawing?
View 2 Replies View Relatedwhat is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies View RelatedI have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
Deleting temp files, if I can just do a blanket Erase, or will this potentially damage autocad drawings. My temp file is on my local drive, but all of our drawings are stored on a network drive. It seems to me I remember these things storing up over time with crashes, etc. But as they build up performance seems to dwindle.
These files range from .tmp files to Texture folders, .cvr files, and nonsense names like A$C5DCD5F31.Can I just window and Delete All?
I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
C:UsershbrittDesktop11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
When pathed to the network it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
I get this error:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
I want to convert my DGN files to DWG files.
So I write this code in LISP:
(defun C:Batch_DGN2DWG (/path dgnfile SDI_Mode) (setq path "C:\DGN\" ;;Default path for DGN files location. DGNIMPORTMODE 0 ;;Imports the DGN file in a new drawing file. SDI_Mode SDI ;;Save Current SDI MODE SDI 1 ;;SET Single Drawing Mode for AutoCAD. );;setq (foreach dgnfile (vl-directory-files path "*.DGN" 1) (progn (command "-dgnimport" (strcat path dgnfile) "" "" "" "y" (strcat path dgnfile ".DWG")) (delay 100) );;progn );;foreach (setq SDI SDI_Mode) ;;restrore SDI Mode to previous value.)
but I can't finish it!
I attached some DGN files for test purpose.
I am deep into my first Inventor project. I am approaching the point where I would like to make a comprehensive set of drawings with bills of material etc. I have discovered that all this time I have actually been working in one big assembly file. My main project file is NOT a project file (so I have discovered). It is a *.iam file.
So, my question is, should I create a project file, and then add my main assembly to it? Should one normally create a new Project file for each new job? What does one gain by doing this versus simply using the *.iam file?
Inventor 2013
As an organization, we have opted to go with STB as we have some complicated requirements that CTB doesn't accommodate. The wisdom of that decision is a moot point and I'm aware of the vast array of opinion.
We have a legacy of CTB drawings that occassionally need to be brought forward when projects get resurrected (state government highway designs are prone to getting shelved).
Up to AutoCAD 2009, I've had a VBA routine that performed a few operations on a list of files stored in a text file:
- Open the file
- Convert to STB using "CONVERTPSTYLES" with a specified STB file.
- Run a script to load a layer state file to change the plot styles from Style1, Style2 etc, to their correct named plot styles.
- Manage a recalcitrant layer that refused to play ball.
- Save and close the document
- Get the next file........
This was all fine until 2010 came along with the announcement that VBA was to be phased out. 2010 is OK with the VBA enablers, but now I've got some work to do.
Our organisation's development language is C# and I'm using Visual Studio 2008 Professional Edition to develop my C# .NET code.
Is there another mechanism than "SendStringToExecute" for sending a command such as convertpstyles to AutoCAD and getting .NET to wait for it to finish before proceeding.
I've got CommandEnded code that handles waiting for MTEXT and DTEXT commands to finish and I've tried constructing a CommandEnded for CONVERTPSTYLES, but it seems to me that commands that throw dialogue boxes such as CONVERTPSTYLESand SCRIPT aren't handled the same way.
I've tried setting FILEDIA to 0 prior to running the CONVERTPSTYLES command, however the message box that CONVERTPSTYLES presents before asking for the STB file appears to be getting in the way.
Does the exported dwg file always have to be a zip file? I have tried save as a dwg file but it seems to be an Invnetor dwg which has the geometry as a block when opened with AutoCAD. It is a little easier to explode the block in AutoCAD rather than open and extract the zip file, save the extracted dwg then delete the zip file.
View 3 Replies View RelatedI have 2 questions.
1. Can Solidworks files be saved as dwg. files?
2.Can Inventor files be converted to 2D files in AutoCAD 2011?
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies View RelatedIllustrator files don't show up in Acrobat file list when trying to combine files into a single pdf
View 9 Replies View RelatedWill the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?
View 2 Replies View RelatedI got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies View RelatedAfter many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies View Related