I cant find Autodesk.AutoCAD.Windows.PaletteSet as My Program,
im import AutoCAD 2013 x64 Directorys
accoremgd.dll
acdbmgd.dll
as my source.
Program is using c# 4.0
// this is my class source.
using ACAD = Autodesk.AutoCAD.ApplicationServices.Core;
using Autodesk.AutoCAD.Runtime;
I created an an app that uses a paletteset, and displays an usercontrol in it. I want to add a scroll to the paletteset. As when I resize it for editing the dwg file, The paletteset data below cannot be viewed without a scrol bar. get the scroll bar.
Autodesk.AutoCAD.Windows.PaletteSet m_ps = new Autodesk.AutoCAD.Windows.PaletteSet("Object Data");UC uControl = new UC();m_ps.Add("Object Data", uControl ); m_ps.Visible = true;
paletteset properties does have any properties related to scrollbar.
I have a paletteset which contains multiple palettes. How can I set one of the palette on top through code?
It is something like set current tab in tab control
I just spent ages perfecting a series of windows forms dlls (not wpf or anyting, just normal user controls from VS2012). they look, compile and test fine. but when I add them to an autocad PaletteSet they stretch out 57 pixels and move buttons into textboxes and such....
is this normal? my docked control is not 407 wide....
it was 350 the entire design phase! and if it added 57 it would be one thing but it "stretches" half the controls and leaves the rest so they overlap!
I created a paletteset with MinimumSize, it works fine when the paletteset is not docked to anywhere. However the MinimumSize doesn't seem to work at all. I tried to dock it to left, then I can drag the edge to really narrow.
View 1 Replies View RelatedThe PaletteSet changed control size and layout. It's different from the status in VS.What's the reason?
View 7 Replies View RelatedI have got a problem about getting user input. In a function i am first getting a selection from the user by editor.getselection(...)
then i show a palette set with my user control in the same function. everything is fine so far.
but after showing paletteset i try to get a string from the user by editor.getstring(...) in the same function but statement continues as i never request it. when i check the PromptResult status it is equal to cancel.
i mean
Transaction acTrans = null;
Document acDoc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
acDocLock = acDoc.LockDocument();
using (acDocLock)
[code].........
i tried to lock the document but it doesnt work either. when i comment out "showpalette(true)" it works correctly. i realized that if my document window s state is not WindowState.Maximized then my code works just fine but if it is WindowState.Maximized it does not work.
I would like to do something when my paletteset is closed. I took the C# code from here
[URL]
I modified the code to VB.net
Dim WithEvents ps As Autodesk.AutoCAD.Windows.PaletteSet <Autodesk.AutoCAD.Runtime.CommandMethod("psTest")> _ Public Sub PSTest() If ps Is Nothing Then ps = New Autodesk.AutoCAD.Windows.PaletteSet("psTest")
[Code]...
My code crashed. If I catch exception it is eInvalidInput exception. I don't know what to do as it is a simple code segment I don't know hot to fix it.
How can I catch the event when I change the container inside a palette?
View 3 Replies View RelatedI have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
The Autocad 2013 x86 or x64 is not installed on Windows 8 Consumer Preview because programs can not read .NET Framework versions 2 and 4 which are integral parts of the OS.
View 5 Replies View RelatedI have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies View RelatedTrying to change the color of a layer in a viewport (different than the default layer color (i.e. model layer color)). Objects are set to bylayer. Changing the VP color in the layer dialog brings up the color dialog, select a different color, click OK and the VP Color DOESN"T change in the layer dialog. It stays at its previous color. Occurs on several machines.
View 9 Replies View RelatedI recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
I have a Windows 7 machine running AutoCAD 2013. When trying to open any drawings from our AutoDesk Vault 2013 server, AutoCAD will hard lock/freeze and can only be closed by using Windows Task Manager. When accessing the same files through the Vault first, without opening AutoCAD, they open with no issues.
View 1 Replies View RelatedI’ve just worked on a series of clients drawing using AutoCad 2009. They are using AutoCad 2013. out of 20 or so drawings several drawings when opening with 2013 open up with Errors requesting recovery is required due to any number of errors ranging from 3 to 7 on average. The error message asks [yes] to recover and it aborts or [no] to continue and the drawing opens ok without further error. If I recover the drawings, and save-as 2013 or other, the same errors appear regardless. However if I open the same drawings using my version of 2009, I didn’t get any errors. The original drawings were compatible with 2009 without conversion.
View 3 Replies View RelatedI have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
We recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
why when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies View RelatedI've made some customisation in the ribbon of a 2013LT version.
Now some customisation functions are only available on the Full, so I download and install it but I can't find a way to import all those custom settings grom LT to Full...
Seems it works only from LT to LT or Full to Full..
Just upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
As many of us seam to do the option to save by default to an older version of AutoCAD or universal DXF format is selected, my problem is however when you save an existing drawing a prompt appears asking if 'Drawing*.dxf last saved in AutoCAD 2004 format. Save in AutoCAD 2013 Drawing format?' this has annoyed me for years!
I have set it as default DXF 2014 for a good reason I don’t want a prompt asking me if I want to then save it as 2013 or I would have set it like that on my default setting, gets on your nerves when you are doing 100's of files.
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
Autocad MEP 2013 was working fine until I installed SP1 yesterday.
Now when type in open the dialog comes up (not a filedia issue). When I click the "look in" pull-down in the open dialog it goes blank and I am unable to browse any folders. I've tried rebooting.. Should I reinstall?
how can I develope a proper piping system just like the one in the attached picture in AutoCAD 2013.
As you can see the tubes aren't that greatly connected.
Each tube is blocking the pathway of the other tube.
I need them to be all connected.
The reason why, is because I will be later using this design in Inventor Fusion and Simulation CFD to have fluid in the tubes.
I keep getting that it is loosing connection, so I never really get to download.
View 1 Replies View RelatedWhen customizing the screen menus, adding a few icons or pull down menus, when autocad is restarted, Autocad reverts back to the default menu. How can I set this up to retain any menu changes I make.
View 2 Replies View RelatedAll of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies View RelatedOkay. So our designer is using autocad 2013. He is using a pc and he is sending me the files (i'm on a mac) and the thinest lines do not show or print. But, they print/show on a pc! I need to be able to print these. I've searched the web and found nothing.
View 3 Replies View Related