In AutoCAD Map 2012 on Windows 7 64 bit, feature editing becomes VERY slow for more than 60 features selected. It becomes even more slow if i use properties dialog for edit feature properties. In SDF if I use constrain values, there is no copy paste option in Data Table so i must do it through properties pane. My projects consists of 20.000 or more features, so how to do it?
View 2 RepliesI have been given the task of importing and editing an IGS sheet metal part. cannot get a feature tree.
Its a pretty basic sheet metal part just need to add few flanges, change hole/slot size. Its for a college project so I have to do it rather than just redraw the thing. I would also prefer to use inventor than solidworks (if I still have it on my laptop...).
[URL]
I keep finding it impossible to edit existing features from models/assy. Even if I change only 1 dim in the sketch. Once I close the sketch. The feature fails. I then try to edit the feature and I will see that the feature direction has changed, but invenotr will not allow me to switch it back. Basicallly there is no editting power at all.
So you only way I have found to complete the job is to delete the feature and then put it back in.
Is this part of the new way of inventor 2013 or is this another time wasting glitch?
Also now when I edit a sketch I must delete all of the dims, then edit and then put all dims back.
Is this also part of the new way or the direction autodesk products are heading?
Commands Work features is not active in edit base solid.
How to make plane? How to make active ?
not able to edit brush features in gimp 2.8; options are not editable...
ubuntu 12.04...
I went from Lightroom 4 to 5 yesterday. No problems, it went smoothly. I uploaded new photos, edited some. Then I used the new clone and heal. Fine. Love it. Tried another image. My fingers were on trackpad and I must have inadvertently changed the way my edit options show. No longer have the main top features after crop tool, clone, heal, etc. Histogram displays. Clone, heal, etc, display. Then it goes straight to tone curve and features below that. How do I get the edit features and sliders back on my Lightroom window?
View 2 Replies View RelatedI have a Mac running OS 10.7. I have Photoshop Elements 10.
When I select the Guided Edit tab, there are no options available. The only tools are zoom, hand, and set foreground color. Everything else is gone. The open file is centered in the blank page, and most of the menu items are unavailable, with the exception of filters.
I have uninstalled and re-installed the program and rebooted. I have also deleted the two database files, as suggested in another post, and they were rebuilt.
I have read enough of the help file to know that there are supposed to be guided edit options available, such as actions, enhance colors, etc. The menu bar has very few options available from the guided edit window. In fact, the only way to get back to the full edit window is to shut down and restart the program.
I have created a feature line from a survey which will be the inside shld of my new road design. I have created the feature line using my design elevations but need to add a PI and Elevation at a specific Northing. When I try to edit I can only seem to find the chainage and elevation but I also need to know the northings and eastings so I know where to insert my PI. I would like to just edit the table since I can't seem to figure out how to insert the PI. (I am new to C3D and still learning...) My final product will be a road with 2% crossfall and I intend to use offeset and grading features to accomplish my final design. How I make this edit...
View 1 Replies View RelatedI Created a Feature Line from Objects (a polyline). I added it to Site 1, gave it a name, layer. Do I Assign elevations during creation (conversion options)?
I set the Elevation to 8.5 (NOT From surface)
Then I go to
Modify Feature Line -
Elevation Editor.
Why are the elevations locked? I want to set them.
This sheet metal model was working fine, until I decided to check it against the original AutoCAD drawing. Once I finish the "Side layout" sketch, the two thicken features had exclamation marks.
Create Thicken/Offset feature failed
00014118master.ipt: Errors occurred during update
Thicken7: Could not build this Thicken
The attempted operation did not produce a meaningful result. Try with different inputs. Thicken feature is where I left "End of part"
If I tick "Automatic blending", it still works, but I want to create a new solid.
------------------------------------------------------------------------------------------------------
Autodesk Inventor 2013 SP1.1 64-Bit
Vista Business 64-Bit
E8400, 8GB, ATI FireGL V5600
I have a complex grading situation with a sewer near a drainage channel. Long story short.... I need to somehow look at my alignment section by section and try to establish a feature line that will represent my proposed top of slope. There are a ton of different constraints that I will not go into. My ultimate need is the ability to establish a feature line or 3d pline from the section view. I know that this is somehow possible via corridors. Im working with just an aligment and cross sections at every 25 feet. Is this possible?
View 3 Replies View RelatedI am using 2008. In previous releases I was able to double click on a feature in the tree and edit any dimension I wanted to, including the "extrusion dim". If I wanted to just edit the extrusion, I would RMB and edit feature. Now when I DBL Click in the tree, it is the same as the RMB used to be. Now to edit any dim other than the extrusion, I have to edit sketch.
View 9 Replies View RelatedI have a finished grade surface and I have a feature line that is my waterline. I created an alignment and then recreated my feature line so they would be linked. I can then create a profile using my alignment and that shows my surface at that alignment. I can even add the waterline by using project objects to profile view.
I need to be able to edit the feature line elevations in the profile view by creating and erasing PVIs so this will tie back to my geometry.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedI have created several feature lines from which I graded to distance or surface. I am trying to edit all these feature lines raising them by 0.5 ft. In a few instances, I need to keep some of the elevs while raising others by 0.5 ft. I am changing the elevation of individual vertices.
Some of the features lines all me to change all the elevations. But on a few of the feature lines, I can change all the elevations except for one. The feature line station for which I cannot change the elevation has a white triangle in front of it in the Elevation Editor instead of a Green Triangle like most of the points. It's clear that the White Triangle means something that is not allowing me to edit the elevation of that feature line vertex, but I'm not sure what or how to fix it so I can edit it like the others.
Also, the Raise Incrementally icon does not work on these points with a White Triangle in front of them / does not change the elevation of them.
In 2010 and previous releases I recall being able to show the feature dimension by right clicking "Show Dimensions" and then being able to double click on any visible dimension and change its value. I don't see this behavior in 2012. Is there a setting to turn this on?
View 7 Replies View RelatedImagine that you have couple of spheres in your scene and you want to manually rearrange them. You click on one and immediately drag your mouse to move it, and it works just fine and fast while they are sphere primitives. But, if you convert them to edit poly things get messed up, now if you click and start to drag you need to wait for about a second for the thing to start moving. And it's the bloody edit poly's fault. It's command panel UI is just drawing too slow. Why is this? Is this something that just is in max now? Because the same thing annoyed me in 2011 and now in 2012. Or is it me who is doing something wrong? Also interesting is that this problem completely disappears when I add some modifier with a "small ui", like PUSH, to all of the objects. Everything is back to fast and snappy again.
This slowness also happens when I want to switch sub-object levels, it redraws every time, and it redraws slowly.
Using Videostudio Pro X5. Captured video using GoPro at 240fps. Video imports fine. I want to edit the video in slow motion. I'm using the "speed/time lapse" option - I set the speed at "25%".
However the outcome is that the video is choppy as if it's throwing away frames. At this setting I should be getting decent smooth frame rates but this is not the case. I'm looking to end up with at least 25-30 fps.
I am trying to make a simple graphic by cutting and pasting a picture into a new project, but when I open up the edit drop down menu, the options for copy or paste are not highlighted, so obviously they are not available. The only reason I can figure out is that somehow, unintentionally, I opened something on the right side that says edit/create/share. How to close this feature and in the gray rectangle box under those words, it is asking me what I would like to create. I just want to make a simple graphic, but because this project program is open I can't make the graphic I want. how to close this project program (Edit/Create/Share).
View 2 Replies View RelatedI have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies View RelatedI am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.
I like to use the sharpen feature and the unsharp mask feature but haven't gotten very good at it. Mostly I'm wondering if there is a way to calibrate the sharpen function so that it doesn't sharpen quite so much each time I click it.
View 2 Replies View Relatedhow to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
View 1 Replies View RelatedI am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
We are a small business that uses AutoCAD. We are currently running 2012. We are on subscription. We only draw in 2D because most of our machines are very simple. The question is; what are the new features for 2D? It seems like the only thing Autodesk is interested in is 3D. I don't know if I want to upgrade further.
View 9 Replies View RelatedI need a solution how to convert SDF line features to DWG, where only one feature converted to DWG and DWG is named after feature ID. So if i have SDF file where are 3 featured( ID's are 1,2,3) and i want to convert those features to three different DWG files(one feature per DWG):1.dwg, 2.dwg etc.
View 3 Replies View RelatedWhen I create a new feature for a feature class in Map, it pops up the Data Table so I can enter my information. The table is a SQL table connected via FDO. There is an ID field set as the primary key. Map wants me to manually enter in the ID. How do you auto generate this field?
View 1 Replies View RelatedI am having a problem to connection to data, the new file connection is properly connecting to data , if I going to add new data , I am getting this error as shown below.
Failed to cache features.
Failed to execute Fdo command.
ORA-03135: connection lost contact Process ID: 11779 Session ID: 4 Serial number: 6917
I'm going through some of the new features/ribbons such as "Design feed" and "Set Location" but when I click on these ribbons, the windows come up blank.
I am signed into my 360 account and the file I'm in is saved to my 360 account as well. why these windows are coming up blank?
Is there any limitation for viewport rotation with connected features?I have number of connected shapefiles that I can see in model view.
However, my paperspace viewport rotated for 70 degree can't show them.
I am trying to detect overlaps between two different features. They are, at the core, shape files from a GIS system and we have AutoCAD Civil 3D 2009.
I have reviewed the steps to test for Topo within a feature but don't know how to test topo between two features. I need to test for and identify "Overlaps" between feature A and Feature B and when Feature A is "Not Entirely Within" Feature B.