I really need to have the ends of my lines be square (plines an regular lines). I have tried changing my Plot Style .stb file to have the Line End Style to be set at "Square." I have checked all of the styles.
The problem is that doesn't change the my lines (pline or line). Even if the plot style is correct, it still has the rounded ends.
Autocad LT 2013
When I try (by setting a line colour), transparency isn't taken into account.
View 8 Replies View RelatedI created a square in which I have to draw vertical lines in it. I want the first line to start at 2.5 cm from the left segment of the square.
In a different way to say it just to be clear enough, I want to align the segment (inside the square) from the left vertical line of the square, put 2.5 cm to the right, and then there's my line.
When I try to align it using the align tool, I use the square as a key object. But it select ALL the square, so it puts my line 2.5 cm but to the far right of the square, outside my artwork. I'd want to select only the left line of the square.
How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
For some reason I cant change the line type on the file with my drawing on, but when I open a new file, I can.
View 9 Replies View RelatedI want to create a line style for feature objects (line object) wich symbols only on the vertex of the line. How can I do it?
View 9 Replies View RelatedHow do I edit line types? whenever I copy this particular existing line type into the other drawing the text style changes. There is no way of editing it when I go to the line's properties. I want to change the line type's Text style.
View 2 Replies View RelatedWhy line display in model view and layout view could be different?
For example, a line of width 0.35mm and short dashed style is displayed correctly in model view, but in layout view is displayed as thin as the default width, and its dash style is also changed (dash length and interval).
Why does this happen and how to prevent it?
line.png
Is it possible to copy a line in Plot Style Table, in my case red nr 1, and have two with different linetype?
I have a drawing where this specific line and the text belonging to it should be in red, (line 1) and the lines dashed. If I in my Plot Style Table make line 1 dashed, the text get dashed too.
At the moment I have put another color to the dashed lines, but if there is a way to have two red nr1 lines with different linetype .
I am looking for a Line Label Style Expression which will perform a rounding function on distance labels that display my "General Segment Length" value.
What I need is to be able to remove "Trailing Zeros" from my distance values, so that if precision is set to say 0.01 and my distance value is measured as 45.5, I do not get 45.50 but 45.5.
I need this to round for:
1 decimal place
2 decimal places and
3 decimal places
When I draw a square and then a line attached to the square and then try to move the line the line the square move with it. How can i avoid that
View 1 Replies View RelatedI have surface style (could be slope or spot elevation) with a 2 line component, and text component above and below the line. I'm trying to create on style for many options. I'm using c3d 2013, but moving to 2014.
I would like to do the following after placing the label:
1. adjust the length of the line component. (ex: as I rotate the lable, the length of seg 1 changes )
2. turn off one of the line component
3. adjust the angle of one of the line component.
4. when drag, the length of the line changes to a new value.
and while I'm asking, is there a way to move/rotate/drag the syle to a percise distance. I want the leader to be 1 unit long at 30 degree angle.
I am trying to figure out how to change the labeling of my sample line style from (<[Sample Line Number(Sn)]> which out puts a count of 1,2,3,4 etc to output A,B,C,D etc.
View 4 Replies View RelatedThis has got to be something simple, but I can't get my head around it. I want to take a feature line that has been created by the "stepped offset" command and change its style, in LISP, of course. I have the entity name and have dumped the object, but the style of the FL is not one of them. It shows up in the properties box, but how do I get to it to change it?
View 9 Replies View RelatedI'm trying to plot a line weight defined by a CTB Plot Style, but the weight will not show in AutoCAD or print.
Here's what I've done;
-Set the line weight in the Plot Style Table Editor, Color 9 @ 0.40mm. Grayscale has been turned on.(All other settings have been left as default)
-Tried various combos like;
-selecting "Display plot styles" & "Plot with Plot Styles" in pg setup
-selecting the "Plot object lineweights". (It also turns off "plot with plot styles" and prints in color (though grayscale is on)
-LWDISPLAY has bee turned on
-Neither model or paper space reflects the change.
-Line types work fine
-Changing the same line thru the Properties Manager does the trick, but I would like to set it up properly thru the Plot Style
Back Ground Info;
-Both the dwg file and Plot Style are new and created from scratch.
If it was a printer issue, it would still show in AutoCAD correctly, right? I've searched various help tools, but seem to be going in circles.
I'm trying to plot 3D objects with hidden lines. I've set the viewport SHADE PLOT property to "Legacy hidden" and set my visual style to 2D Wireframe with 2D Hide-Occluded Lines linetype set to "Dashed". The hidden lines do appear, but I don't like the size and spacing of the dashes. Is there a way to add "Hidden" linetype to the selected visual style? Or perhaps there's a way of adjusting the linetype scale for visual style occluded lines (similar to LTSCALE or PSLTSCALE command)?
View 2 Replies View RelatedWe are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
When I import shape files the polylines will not take the layer style I move them to. They stay a continuous linetype. Linetype and Lineweight is set to ByLayer. Only difference between the new lines and the lines drawing correctly is the lines that stay continuous are 3D polylines and the correct ones are normal polylines. What I need to do to make the imported lines accept my layer linetypes?
View 8 Replies View RelatedMy current company have funny setting. It is time consuming task to manually open dialog box to change the setting for old drawings. May I know any command that I can use, so that I can copy and paste those command in the command window to change the properties.
View 6 Replies View RelatedI'm trying to edit my label style so that the bearing has no decimal places and the distance has two. I thought it would be similar to editing the contour label precision but it doesn't seem to be that way.
View 3 Replies View RelatedI'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies View RelatedI am trying to create a feature line style that would include markers similar to minor stations of an alignment at the End Points and 1/4D, 1/2D & 3/4D locations. The thought is that I could use these on curb returns, and the markers would identify the locations we provide construction staking.
View 7 Replies View RelatedWhich settings or where do I go to set my drawing Style, Text height and line space factor on all my drawings in one shot. It is frustrating going through many drawings changing it.
View 9 Replies View RelatedCan this be done? I want to go through the DrawingView Object to get at a subcomponent of an assembly and either set that component to have hidden lines (where needed) or no hidden lines.
View 8 Replies View RelatedI used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedWe are trying to use the "Underline top line" option located in the Content tab of the Modify MultiLeader Style dialog in AutoCAD 2012 (See attachment).
The minor issue we have is that there seems to be no way to adjust the gap between the text and the "underline". In regular dimensions, there is a dimvar called DIMGAP that controls this distance. Is there any way to control the distance between the top line MText and the "underline"?
How do you start a new line in a paragraph block? When I hit the enter key, it just returns to the front of the same line, overwriting the same line over and over again.
1. Clicked Text tool.
2. Dragged out a paragraph block.
3. Started typing and noticed that when it reached the end of the paragraph block, it just wrapped to the beginning.
Using text tool to add text on photos (jpg): Any way to disable Line style that overlays text, or make a custom transparent line?
View 1 Replies View RelatedScreenShot108.jpg
left sketchup layout ... NOT ATTEMPTS TO BE VECTOR GRAPHIC PROGRAM
RIGHT X6
... left same 2squares line 2px and 2squares line 15px
... same line stile !!!! upper two have style spacing 0,2x and bottom 0,4x
... you can adlust the dot/line/ ... spacing !!!!!!!
... tried to do that in corel !!!! ??? no easy way :( ...
... in layout I set 0,21 0,3 0,4 1 1,2 ..... and immediately see the change not affecting
NOT AFFECTING LINE BRIGHTNESS
I'm a newbie in Corel draw X4. editing lines and curves ?
My problem is about the outline: When I edit a line that was made with a certain style (eg Artistic Brush) Corel reset its outline properties to the current default one :-(
Is there a way I could lock my object to prevent this ?
Is there a way to achieve the calligraphy line style found in AutoCAD for revision clouds in Revit?
View 1 Replies View Related