I'm having difficulties every now and then importing a template 'Layout' 'first image'..Most of the time it's fine, and imports no worries as in the 'second image'
Why they are different, I have check Page Setup Manager, and I can't identify any differences.I'm using the Design Manager to Import the Layout (in both instances).
IMAGE 1 - PROBLEM IMPORTING TEPMLATE LAYOUT...The actual 'page' you can see in the bottom left corner, the 'block' has been scaled like 20-fold, Wierd!?!
So everytime I import a layout from my template, the scale comes out wrong. The border is way too big, viewport, and the stamp is also way to big. It's being scaled by approximately by 12.28 times.
Here's what I can share:
- both drawings are in inches in both files
- all that 'insunits' stuff is set to zero in both files
- 'measurement' and 'measureinit' is set to zero in both files
- using AutoCAD 2012
- xyz scale is all at 1.00
- the titleblock itself almost imports correctly, only some of my att text doesn't come out properly as well.
As far as i can tell it's the command 'from template' issue. Because when i cut and paste the templates layout contents, it comes out fine.
When I manually add a new layout from a template, I do NOT get any extra layers, but when I use VB to do the same thing, I get extra layers.
In the original drawing, I have layers called "SHEET", "TEXT", and "VIEWPORT" (among other layers).
In the template where I get my new layout, I also have the same layer names ("SHEET", "TEXT", and "VIEWPORT").
After the new layout gets read in, I now have extra layers called "$0$SHEET", "$0$TEXT", and "$0$VIEWPORT". Why does this happen using VB, but not when I do it manually? Is there anything I can do to the code to change this? I understand the layer names are the same, but they're the same whether I do it manually or by code.
Public Function importLayout(ByVal templateFileName As String, ByVal templateLayoutName As String) As ObjectId Dim idLayout As ObjectId = ObjectId.Null Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim ed As Editor = doc.Editor Dim oLock As DocumentLock = doc.LockDocument() Dim
I have a small project that I'm working on that inserts a new layout based on a user selected template size (A, B, C or D sizes). I need the program to insert the layout along with the titleblock geometry from the existing A, B, C, or D dwt files.
I know how to add a new blank layout. However, I'm having some trouble determing how to insert the titleblock geomtry. I've read a number of posts on here related to layouts, and while they were informative, none of them covered exactly what I need to do.
I have an old drawing where I am inserting layout from the template. The problem is that the template is off from the white sheet of paper. My templates are .dwt files and usually work fine.
I am using Autocad 2012, I made a drawing frame template up in model space, then saved it into the DWT template folder, when I go into Layout and into insert to insert the template it will not show up.
I reloaded the DWT template back into model space and saved it as a DXF and I am able to insert the dxf template in Layout using the insert Block.
I can get the job done by using the dxf template but I would like to be able to insert the DWT template.
When I import a layout from template it takes about 5-10 min of ACA not responding before it will actually import the layout from my template file. It will do this on any new file the first time and then it will work just fine after that. This was happening with ACA 2013 and now with 2014.
I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
i am having a BOM template for the parametric modelling i have created using the excel sheet input link.
when i create the drawing from the model the default Bom part list is coming, instead of that i need to get the Excel Bom Template i have created based on the input excel link.
Needed to purge items in a drawing to recover a drawing in order to repair corruption within it it. I purged and audited the drawing in question and then created a block or the drawing elements which I imported to a new drawing sheet. That's great, all is well but.....obviously (now) the only layers, dimscale,etc. items I normally use in my template sheet are gone and only the items remaining after the purge are the ones that were in my original drawing.
How can I, or can I replace my normal full layer list, dim settings, blocks, etc?
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
I use illustrator for several things.So i really need to use shortcut's.But there is one big problem : I have the english version of illustrator and i have a German keyboard layout.An example :
To blank a shape u use '/' ( English Version ) To blank a shape u use '#' (German Version )
I can't use '/' cause i have to press shift+/ ... I dont know its not working.Can i change the "Shortcut-Layout" and use the German layout ?
I have a client with AutoCAD Map 3D 2011 with an OLE DB Provider for SQL Server Data Source and a dbConnect link template connecting to the database.
Normally, when an object that is linked to the database via the link template is selected, the data from the linked table appears in the properties palette. Recently a change what made to the table (view) that the link template and the Link template no longer appears. The view was restored to its original state, but the link table still is not visible.
If the data source is disconnected via the task pane, the link template reappears (with only the key showing, of course). The data can still be seen via the link template "View Linked Table" context-sensitive menu in the task pane so the link still remains.
I have disconnected, deleted, and rebuilt the data source, but it has not worked and I cannot delete the link template as there are several thousand objects linked via the template.
I want to do what should be quite a simple thing. I want to set up a new A3 template, with a border and title block. Then I want to print a drawing onto that A3 sheet to a scale suitable to fit nicely on the page. Try as I might, I cannot find any tutorials to tell me how to do this.
I started a drawing a week ago but am not sure I used the right template. Is there a way to find out which template I used? I tried using DWGPROPS and STATUS but neither of these mention which template I used to start the drawing.
I have created several dwt's that are used fairly extensively in my organization. They are just the standard setups; 8.5 x 11 or 11 x 17 or 24 x 36 sheets with title blocks. What I was wondering is how to set up standard templates for things like multileader and dimension styles. If I create the styles in the dwt, and then save the it, would any person to use the dwt afterword have those styles available? Or is this something a bit more complicated like having everyone point to the same "acad.lin" file so that we all have the same linetypes?
