I am currently drawing my plans and realised the template: "Tutorial-mArch.dwt" is an A1 Paper Size.
I can only print A4 pages so when I compressed it to a A4, the layout of title box simply goes out of scale.
How do I scale those? If you do not mind me asking more, how do I make my title box (name scale on my own?
I have a small project that I'm working on that inserts a new layout based on a user selected template size (A, B, C or D sizes). I need the program to insert the layout along with the titleblock geometry from the existing A, B, C, or D dwt files.
I know how to add a new blank layout. However, I'm having some trouble determing how to insert the titleblock geomtry. I've read a number of posts on here related to layouts, and while they were informative, none of them covered exactly what I need to do.
I'm having difficulties every now and then importing a template 'Layout' 'first image'..Most of the time it's fine, and imports no worries as in the 'second image'
Why they are different, I have check Page Setup Manager, and I can't identify any differences.I'm using the Design Manager to Import the Layout (in both instances).
IMAGE 1 - PROBLEM IMPORTING TEPMLATE LAYOUT...The actual 'page' you can see in the bottom left corner, the 'block' has been scaled like 20-fold, Wierd!?!
IMAGE 2 - LAYOUT HAS BEEN IMPORTED CORRECTLY.
I have an old drawing where I am inserting layout from the template. The problem is that the template is off from the white sheet of paper. My templates are .dwt files and usually work fine.
View 9 Replies View RelatedI am using Autocad 2012, I made a drawing frame template up in model space, then saved it into the DWT template folder, when I go into Layout and into insert to insert the template it will not show up.
I reloaded the DWT template back into model space and saved it as a DXF and I am able to insert the dxf template in Layout using the insert Block.
I can get the job done by using the dxf template but I would like to be able to insert the DWT template.
When I import a layout from template it takes about 5-10 min of ACA not responding before it will actually import the layout from my template file. It will do this on any new file the first time and then it will work just fine after that. This was happening with ACA 2013 and now with 2014.
View 4 Replies View RelatedSo everytime I import a layout from my template, the scale comes out wrong. The border is way too big, viewport, and the stamp is also way to big. It's being scaled by approximately by 12.28 times.
Here's what I can share:
- both drawings are in inches in both files
- all that 'insunits' stuff is set to zero in both files
- 'measurement' and 'measureinit' is set to zero in both files
- using AutoCAD 2012
- xyz scale is all at 1.00
- the titleblock itself almost imports correctly, only some of my att text doesn't come out properly as well.
As far as i can tell it's the command 'from template' issue. Because when i cut and paste the templates layout contents, it comes out fine.
I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
When I manually add a new layout from a template, I do NOT get any extra layers, but when I use VB to do the same thing, I get extra layers.
In the original drawing, I have layers called "SHEET", "TEXT", and "VIEWPORT" (among other layers).
In the template where I get my new layout, I also have the same layer names ("SHEET", "TEXT", and "VIEWPORT").
After the new layout gets read in, I now have extra layers called "$0$SHEET", "$0$TEXT", and "$0$VIEWPORT". Why does this happen using VB, but not when I do it manually? Is there anything I can do to the code to change this? I understand the layer names are the same, but they're the same whether I do it manually or by code.
Public Function importLayout(ByVal templateFileName As String, ByVal templateLayoutName As String) As ObjectId Dim idLayout As ObjectId = ObjectId.Null Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim ed As Editor = doc.Editor Dim oLock As DocumentLock = doc.LockDocument() Dim
[Code]....
I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
I have just downloaded the 3 year trial of AutoCAD for students. I have managed to create a floor plan but struggling to amend the layout. First of all, I would like the page setup to be A3 but that is not an option on my Page Setup Manager as it will only connect to my printer size.
I am also trying to add a Title Block but again do not know what I am doing, or where to download template ones for free?
I had inserted a block on my model page. I then wanted to insert it on my layout page where I wanted to have a legend. The block never showed up on the layout page and now it is not on my model page. When I attempt to insert it anywhere else now, the block does not show up in the preview window of the insert popup, nor on the drawing.
View 9 Replies View RelatedI have change the orientation of my layout,the whole drawing is out of page ,How to set it?
View 9 Replies View RelatedWe have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.
I've got a very long narrow site where more of it would be better shown and printed on a vertical page. However all the default and custom viewports are designed specifically for horizontal pages. How can a page be rotated to be plotted vertically?
View 4 Replies View RelatedI am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
We are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies View RelatedWhy the dashed line (view area) changes on a page layout between plotting to pdf and plotting dwg to pdf? I have a title block that measures 16.25 x 10.25 that will print fine to pdf (for 17x 11). This same block will not print completely when using dwg to pdf.
In creating the page layout for pdf (only)the offset is .125 x .125. Once created, if I use this layout and then choose dwg to pdf as my plotter I do not have the ability to "fit to paper"
In creating the page layout for dwg to pdf the offset is .228 x .70. When bringing in the title block at 0,0 there is no way for this block to fit inside the dashed viewing line. The amount that this block extends beyond the top dashed line is way beyond what is available at the bottom.
I created a template using ANZ as the base template. Now I have a requirement to change the country kit to UK. What all the things I need to change in the template to use the UK country kit.
Also when users using my template on a machine which don't have ANZ country kit installed, they getting error messages such as missing SHP files, Payload item not found.
How to fix these issue also what is the correct procedure when giving using Civil3D template who are using different country kit.
I recently update the template for my drawing files, change the title block, revision, note....and I can't find a clean way to import this template to the existing files. I tried the Drawing resource transfer wizard tool, but it doesn't seem to be doing anything that I want.
View 1 Replies View RelatedI am trying to plot a drawing on a tabloid sheet. I don't remember how to do so.Heres is what I have tried:
I went to "Page Setup Manager" in the options from right clicking on the Layout tab and then went to modify. From there I chose my Paper Size as "ANSI B (17x11 Inches). Then from the "What to plot" tab I chose extents and when I preview the print it doesn't incorporate the whole drawing, but only a portion of it. It does the same thing if I choose the other options (window, layout, etc...).
I get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies View RelatedI am having a problem with AutoCAd LT 2014 incorrectly locating mouse clicks with respect to the change page layout arrows. In order to reproduce this error you must have enough page layouts in a drawing to highlight the arrows (bottom left) which change the layout tab. Clicking on the right (or left) arrow several times consecutively will be incorrectly identified by AutoCad as a double click on the 1st page layout visible and will execute the rename feature. However the mouse pointer is not over that layout tab, it is clearly over the right arrow.
Why does AutoCAD read a clicks in this area incorrectly and register them instead nearly 30 pixels to the right.
Any work around as I commonly use the arrows to cycle through pagelayouts in drawings which have 50+ page layouts.
I have also noticed that AutoCAD will preview page layouts when hovering the mouse over the page layout change arrows, this reinforces the belief that AutoCAd is not correctly identifying the mouse position in that area.
Is it possible to import my existing webpages I have saved on my PC. I want to re-design them and make a few changes etc. I only seem to be able to import the images from a page. Am I being dim or is this simply done? I am using Designer Pro 6
View 4 Replies View RelatedI’m trying to create a view port, which covers my entire layout (white/ page area) using the following command
(command “mview” ‘(0 0 0) ‘(297.5 210 0))
However as you will note 0,0,0 is not the very edge corner of my layout (white area) and my white area is smaller then 297.5x 210mm (standard A4 landscape size)
How to obtain the exact measurements and starting coordinates to fully fill my entire layout page (white area)?
how to change the color for the layout of all area to gray
View 1 Replies View RelatedWe just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
When I first open Gimp I get a blank page, there's no template I have to create or anything, but when I try to open a new page to adjust other images it make me create a template, even deleting the background layer it starts with gets me an alpha channel.
Is there a way to open a new Gimp window without having to create a template? Like for pasting images into?
We have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
View 2 Replies View RelatedIs there a way to change the layout tab name to match an attribute in the drawing? For example, I have a block in my title block named REV and an attribute in that black named RevNum, I want my users to be able to edit that block and the layout tab automatically change to match, i.e. if they modify the RevNum attribute to be A i want the layout tab name to change to A. I want this to be transparent to my users normal workflow.
View 2 Replies View Related