I have currently moved company, and my dims aren't working in the same way (also updated to 2012LT from 2010LT)
I want the dimension to display in integers, but I want the measurement in the quick properties to have a precision of 2 decimal places.
Now it was done at my last place, but I cannot find how to do it at my new place!!
Even though my dimensions are accurate and visible within the drawings I cannot get them to print? AutoCAD LT 2012.
View 1 Replies View RelatedI have selected architectural as my units display. While I am drawing it shows feet, inches, fractions. When I enter a dimension it will only display in inches and decimals. What am I doing wrong?
View 2 Replies View RelatedAny way to show dual dimensions as shown on the right rather than the one which we get on the left
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
I'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
Is there a way that I can make the length of the dropdown menu (shown below) for the Dimension Styles longer? It is difficult to select the correct dimstyle.
View 5 Replies View RelatedIn AutoCAD, or some 3rd party software perhaps.
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
I am trying to reference my room number to another table in my project. This is to satisfy a project requirements and output to a GIS attribute table.
Originally my room number is "001" and when I reference this field to another table I get "1" and drops the first two digits.
I'm trying to import a .SAT file into ACAD 2000. I'm using the ACISIN command. Usually I don't have any problems with this. When I find a .SAT file that is too recent, I use HOOPS 3D Part Viewer v13.15 for ACIS to save down the file.
Lately I've been trying to import some Colson caster CAD files from 3dcontent central and I have a problem when I get to the ACISIN portion of my procedure. I get this message
"Modeling Operation Error:
Missing integer in restore file.
Unable to read the ACIS file"
The file looks fine in HOOPS. I'm not sure why it's not coming into ACAD. I used to not have this problem but I'm having it a lot lately.
Just reviewing the discussion board, I find that there is an indication that this error has been around since longer than AutoCad 2000.
We are currently using AutoCad 2010 in combination with Cadworx 2010 and still encounter the "Missing Integer in Restore File" error randomly. Once this error is encountered, the drawing file is rendered virtually useless.
why I get a this when I click on a tab in the Options dialog box?
View 2 Replies View RelatedI would like to eliminate a mouse click in my program. I use getstring to allow the user to either enter in an integer or a distance used for labeling in a drawing, but I could eliminate the need for the user to then click an option that completes the label if I only knew how to determine if the entry is an integer (such as 5 or 15) or a distance (such as 24" or 36").
View 9 Replies View RelatedSurfaceBody.GetExistingFacets( ToleranceIndex As Double, VertexCount As Long, FacetCount As Long, VertexCoordinates() As Double, NormalVectors() As Double, VertexIndices() As Long )
This works fine in VBA (Inventor 2014). But when I start using the same in VB.NET (VS 2012) all declaration as long shows as integer and fails on compiling. If I change to integer compile passes but fail on executing in Inventor 2014.
I work with OpenEXRs 3D renders alot. While they are usually lossless at 32bpc, there are options to save at lossy 24-bit float and lossy 16-bit float with drastically reduced file sizes.(Photoshop still opens them up as 32bpc)
How do these compare to Photoshop's 16bit color? (Which I'm assuming is 16-bit integer?)At 16-bit float, I'm throwing out half the color information, but I'd still have vastly more color information than 16-bit integer? When do I really need 32bpc float? And when is 16bpc float "good enough"?
I'd like to use a grid to snap a lot(!) of small images into a larger(!) one. That works alright.
Problem: the large image has places the small images need to be snapped into, but they are not spaced an integer number of pixels apart. So the grid slowly wanders off the places as I move over the sheet. The places are 127.5 pixels apart (alternately 127 and 128, I guess). I cannot scale the image up, because the image is already 2.7 GB in size and my computer cannot handle the quadrupled size.
Is there a way to make GIMP accept a non-integer width for grid spacing?
It is absolutely ok if GIMP alternately places the grid lines a pixel shorter and a pixel longer.
Edit: I'm using GIMP 2.6.11, could install another version.
I'm working on some art on Adobe Photoshop CS6 Extended Trial and suddenly out of the blue, whenever I use the Brush Mixer tool, a message appears on screen saying that I can't use it because there isn't enough memory on the RAM. So I tried to enter Preferences on Photoshop to try and increase my memory usage however every time I do that, a message appears on screen saying "An Integer between 96 and 67 is required. Closest value inserted". Sometimes when I click "OK" on this box, it doesn't disappear and I'm forced to close Photoshop via Task Manager. Or sometimes the Preferences box box will open but when I try and click on the "Performances" tab within the Preferences box, the same Integer error message appears again and again and I can't click on the "performance" tab whatsoever.
View 9 Replies View RelatedI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View RelatedAfter closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedHow do you add a display component to a display?
For example, Stairs have a stringer componet in plan display configuration but does not have a stringer componet in the Low Detail configuration. I need the stringer to show when I go to low detail how can I add a stringer componet in low detail.