I have selected architectural as my units display. While I am drawing it shows feet, inches, fractions. When I enter a dimension it will only display in inches and decimals. What am I doing wrong?
View 2 Replies
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedEven though my dimensions are accurate and visible within the drawings I cannot get them to print? AutoCAD LT 2012.
View 1 Replies View RelatedI have currently moved company, and my dims aren't working in the same way (also updated to 2012LT from 2010LT)
I want the dimension to display in integers, but I want the measurement in the quick properties to have a precision of 2 decimal places.
Now it was done at my last place, but I cannot find how to do it at my new place!!
Any way to show dual dimensions as shown on the right rather than the one which we get on the left
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
I'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
Is there a way that I can make the length of the dropdown menu (shown below) for the Dimension Styles longer? It is difficult to select the correct dimstyle.
View 5 Replies View RelatedHow do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
In AutoCAD, or some 3rd party software perhaps.
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
I mean to change the value with text or other value but not real
View 4 Replies View RelatedI am having problems with dimension after changing the dimscale. The user wants to change the dimscale. The program prompts for the selection of a dimension entity and also for the new dimscale. The dimscale property of the dimension entity is set to the new dimscale. The problem is that the entity is not updated on the screen, even after calling the entity draw method. In VBA there was an Update method, but I can find anything like that in the .NET dimension entity.
View 9 Replies View RelatedI have recently upgraded from LT06 to LT09.Why am I having trouble changing the text height on my dimension? I used to be able to double click on a specific dimension and change the text height to anything I wanted and than using the "match properties" icon change all the others.
View 9 Replies View RelatedI am in inventor and I need to draft up some diagrams for a lab report for school. They all have to be to scale so my dimensions will work properly, the only problem is, when I want to take a screenshot of the image to put into my document, the dimensions are way too **** small. I have tried everything to change them and nothing has worked. I don't know where my command line window is so I can't go directly to dimstyles.
View 3 Replies View Relatedare there any possibilitys that i can change my dimension style in a way that dimensions with less than a meter are shown as centimeter, for example 0,50 (m) are shown as 50 (cm).
View 6 Replies View RelatedI have the same problem and want to scale only in one direction. Through the search I find out that the solution is block/insert and I use it.But what is my problem?, Dimension lines.
My drawing has dimension line and I want AutoCad to change the dimension value after inserting according to scale factor. How can I do this? At present after scaling in one direction, dimension value remains same as before scaling.
I have a complete gearbox drawing from a previous work and I would like to use it again but with different dimensions.
If I edit the dimensions and enter different values its not enough because when I hit the inquiry tab and dimension, obviously it will be the old measure value.
My question would be how to change the whole drawing to a new dimension values? I think there is no need to redone the whole gearbox again with new dimensions. My drawing is in metric (millimeters).
Whenever I try to dimension a drawing in model space the text of the dimension comes out unreadably small.
I go into dimension style manager, I click on modify and I click on the text tab but the text height and fraction height scale is greyed out!
If I click on "new" dimension style the only option I get is to base it off my current dimension style with the text size greyed out again.
How to change the text size of dimensions if at the option is greyed out?
I'm having an issue with dimensions changing from when I save the drawing to when I reopen it.
I'm using AutoCAD Mechanical 2009, exclusively in 2D. I save drawings in AutoCAD 2000/LT 2000 Drawing format to maintain backwards compatibility with our legacy documents which are still in regular use.
The exact process is:
1. Create dimension in existing drawing.
2. Set units of dimension. Typically this is fractional.
3. Save and close drawing.
4. Reopen drawing, and all of the dimensions units are set to decimal to the fourth decimal point.
If I interact with the dimension in any way, it will return to its set unit. For example, if I double click on it to bring up the Power Dimensioning window and just click Okay without altering anything, it will change back to its set unit. Likewise, if I move the dimension itself it will return to its set unit as well.
So far my solution has been to simply select the entire drawing at once, then move it X units one way, then X units back. The move back and forth will return all the dimensions to their set units.
Obviously this is not ideal, especially when sending drawings to co-workers who are unaware of the issue or even using different versions of AutoCAD.
See the attached image. I'd like to rotate the text of the dimension shown to be horizontal relative to the page.
The best I've found in searching for a solution is here (on the bottom):
[URL].....
however, following those instructions actually changes the dimension value to the distance projected in the plane of the sheet.
I have 2 dimension styles, but for one, I can't change the arrowhead
In the attachment, there are 2 dimensions, one of each style. The left one works good, the right one doesn't reflect any changes to arrows (type, size).
We need re-location the diameter dimension after we change the drawing view's scale. but we didn't know how to change the Startpoint of the dimension (mark with Red word "1"), just find the text location.
Who knows how to set the new point to for the startpoint?
I like to change the dimension of the length from 388mm to 400mm to represent another similar part with another part number. Yet I still need the old part.
What is the easiest way to do so? When I use 'save as" and then change the dimension, I need to recreate the dimensions in the dwg files. Is there a way to avoid creating the dimensions?
I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
I have a series of existing dimensions from others which I want to put on a screened layer so they aren't prominent. They are dimension objects, and going into the dimension style manager, I can change the color of the dimension and extension lines and the text to "Bylayer," but I can't find a place to change the color of the arrowhead, which, in this case, is not an arrowhead but is an oblique slash.
I exploded one of these dimensions, and with "List" I found that the slash was a block called "Oblique." When I exploded this, it became a line, which was on Layer 0, and its color was set to a specific color, not on "Bylayer".
Is there a way in which I can change the attribute of this dimension style to override this specifically set color of the oblique line to reset to the color I want it to print in (in this case, "Bylayer").
I am trying to dimension a drawing and have tried everything under the sun to change the text size but despite everything it keeps producing the text at a tiny size .
View 3 Replies View RelatedI try create simple block where I change dimensions of polylines. Everything work with stretch partameter until I try use search parameter for change dimension.
View 4 Replies View RelatedI seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
I just started using Inventor and I have this issue, that whenever I set a dimension in a sketch, the sketch doesn't update to the new dimension until I move my mouse/cursor. Is this normal? Is there any way to change it so it updates as soon as I hit the enter button (after entering a dimension)
View 3 Replies View RelatedI need the dimension of .5 to become .25.It won't work, probably because it is the same dimension of Sheet metal Tickness.
View 3 Replies View RelatedHow do I change the dimension size in sketch mode?
View 4 Replies View Related
