We had a lab we have a CAD class in. One student suddenly has an issue where AutoCad LT 2014 freezes when he opens up his project and changes the scale. He has tried several computers and the same issue occurs. It seems like it may be something with the project file. Is there any way to retore the file where this does not happen and so he can continue working on his project?
View 1 RepliesI am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
I exported a DWG from sketchup, for version AutoCAD 2010.
When i open it in my office with 2014 the scale is correct. But when i send it to a colleague with verion 2010 the scale is different.
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
how the scales and printing works.
first i am working in meters .meters is choosen under the drawing settings tab .i am trying to test print at 1:1 a rectangle with 0.2 meters side that normaly will fit in a A4 sheet since the A4 is 0.21x0.297 METERS .
in the print dialogue i set the 1"mm" = 0.001 "units". the result is an image multiplied by 1000...arent the " units " METERS? METERS is what i use in the drawing so why i get a biger image?
if i set 1"mm"= 1 "unit" and NOT 0.001 i get correct 1:1 print .
what i am missing? c3d wants me to give 1mm=1meter?
I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
I have a short lisp program that returns either a T or nil, what I want is to shell an *. Exe file if nil is returned whilst T is engorged and AutoCAD continues?
to give some better example im trying to get autocad to launch an exe i have created if the ctb is missing the lisp snippet i have for detecting a ctb is (and tested) as follows;
(findfile (strcat (vla-get-PrinterStyleSheetPath (vla-get-Files (vla-get-Preferences (vlax-get-acad-object) ) ) ) "\" (vla-get-StyleSheet (vla-get-ActiveLayout (vla-get-ActiveDocument (vlax-get-acad-object) ) ) ) ))
now i want to capture if it says nil so that it activates the EXE file i have created to do additional stuff...
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
Noticed a change in the trim command between 2013 & 2014?
In 2013 (with out selecting trim all) the trim line didn't have to intersect the line you wanted to trim. We just upgraded to 2014 and I noticed that if I want to trim a line that the lines have to intersect. A line that doesn't intersect with the selected trim line will not trim.
I am using Lightroom 4.3 64 bit. My PRINT module is responding slowly or not at all. I had been using Lightroom 4 upgraded from Lightroom 3 with no issues for some time. I did upgrade to Windows 8 and noticed no issues with Lightroom. Recently however, my PRINT module started responding slowly to print settings and commands...with "Lightroom - PRINT is not responding". This issue started gradually and has increased over time. Making it almost impossible to print now.
View 1 Replies View Relatedheres the problem we had created a slope style in 2012 15% - 25% and 25% - 100%. done this many times with no problems. so we upgrade and open the file in 2014 now there is a large white area that c3d is filling in.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
New CC is locked up after trying to install Topaz filters. CC responds to no mouse clicks at all. Was able to install NIK filters OK.
View 7 Replies View RelatedLooking for any solutions for a problem that has been going on for some time and have systimatically changed configuations, reloaded drivers, etc. Here is the paticulars. PC with dual core processor, 4gb ram, os XP sp3, PS cs3, Lightroom 3.6. When I launch PS or LR the Wacom tablet get realy jerky responding and lags in responding to input.
View 6 Replies View RelatedIf I had some custom lisp routes that I used with ACAD 2009, then 2012...do you think I would need to upgrade, modify or change any of the lisp to work correctly in 2014?
Could a custom lisp that I used in 2012, corrupt, effect performance, screw with other key commands (although with worked in the 2012 software) in 2014 if I didn't upgrade the 2012 lisp?
SurfaceBody.GetExistingFacets( ToleranceIndex As Double, VertexCount As Long, FacetCount As Long, VertexCoordinates() As Double, NormalVectors() As Double, VertexIndices() As Long )
This works fine in VBA (Inventor 2014). But when I start using the same in VB.NET (VS 2012) all declaration as long shows as integer and fails on compiling. If I change to integer compile passes but fail on executing in Inventor 2014.
I have a user who crashed and all the layers were renamed with the prefix to:
9669-pbase|
He needs to strip out all the "9669-pbase|" prefixes in 1,000 layers. Is there a way to do this?
I got the VBA code to access the dwg scale. I would now like to know how to change the dwg scale with VBA. How do I do that?
View 1 Replies View RelatedI've completed my drawing in modelspace, scale 1:1. I'm about to set up for plotting in 1:00 scale. I go to layout, pan the image, set scale to 1:100 and lock the viewport. Everything is peachy so far. I also need to have some dims on my drawing, so I go back to paperspace, change the scale from 1:1 to 1:100 and all hell breaks loose and my drawing is left as a mess.
View 9 Replies View RelatedI want to be able to have All Work Planes set as 'Invisible' but create a Message.box or Icon that allows me to change the Visibility of any individual workplane(s) physically selected in the browser.
A rule written by another member should do the trick if the following line could be altered so as not to read 'For Each' oWorkPlane but instead for 'Each Selected' oWorkplane.
'For Each oWorkPlane In docFile.ComponentDefinition.WorkPlanes'
'get user input
oInput = InputRadioBox("Select workplane visibility:", _
"Turn ON workplanes for all components", "Turn OFF workplanes for all components", "False", "iLogic")
'Define the open document (top level assembly)
Dim openDoc As Document
openDoc = ThisDoc.Document
[code]....
Maya 2012 is slow on win 7 64,moving vertex, extruding polys,sculpting,the viewport responds slowly if maya dosen't crash at all!
View 9 Replies View RelatedWhen i go to use a new hatch and try to change the scale it automatically goes back to 1.0. When i go into Hatch edit after i have clicked out of it, i can get it to go to the scale i need. It just wastes so much time to have to do two steps instead of one. How can i get the scale to change right away?
View 6 Replies View Relatedusing Autocad 2007.
If I have drawing that was drawn in scale 1:1250 in model space but I want to show this in paper space as scale 1:500 the dwg will obviously be tiny. How do I change the scale in model space so that it can be presented in paper space fitting the page at scale 1:500 on size A1? Is there a calculation I need to change the model space dwg?
How do i change my scale to arch?
View 5 Replies View RelatedI want to change my ground conductor from solid green to a dashed line (green is OK) on a set of drawings, but all the dashed linetypes I can find don't show up well at the scale that I've drawn the circuits. I can make them look OK by changing the linetype scale in the properties manager window, but there are a boatload of these lines in eight viewports; finding them all would be a major pain. They are all on a single layer, though, but in the layer properties manager I do not see a way to change the linetype scale for the layer. I could use the properties manager to make the change if I could select everything on the layer. Is there a way to do that?
View 4 Replies View Relatedi already know how to change the viewport scaling from 1:1, to 1:10, to 1:20, and so on but my real issue is someone before me change the view scale from 1:1 to 1:.808XXXXX. when i print my figures from the layout everything that is not in the viewport ( like my scale bar) come out shorter that it is on the the screen in paper space. Ive tried to change it back to 1:1 but it wont accept it and keeps the .808XXX value.
View 2 Replies View RelatedI can't seem to change the DIMSCALE. I want to change this is our template. It is 8'-0" and I can't get it to change to anything else. I get a response of "Cannot set DIMSCALE to the value". I have entered 1....1'=0"....0'=.8333....4'-0" etc., etc. Units are in Architecture Inches. I've unchecked "Automatically Create Dimscale Override"; saved as Default; went to Options...AEC Dimension and unchecked everything in "Automatic Scale of AutoCAD Dimstyles" (don't know if that has anything to do with it).
How do I change the DIMSCALE?
I am using Autocad Architecure 2011. I chnage the scale of a material (CMU) but it does not update the rendering with new scale. Is there a variable or something that is off?
View 5 Replies View RelatedIs there a way to scale from D size to E size when creating a pdf?
View 4 Replies View Relatedhow can I change the scale of a dwg from AutoCAD 2013 version on 1'=1/4" into 1'=1/8" AutoCAD 2006?
View 4 Replies View RelatedI have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
I am currently working on the drawing which I initially didnt have a template for (ie the border for the A1 page this drawing will be printed on) so off I went and started drawing using a scale of 1 drawing units = 1mm.
Now I have been given the border and the drawing I have comes no where near fitting on the sheet so I want to select all of the drawing and change the scale but I obviously don't want the dimensions to change. How can I achieve this?
I also need to know as there are certain parts of the drawings that need zoomed in views so all I want to do is copy the parts I have drawn and increase the scale but again keep the dimensions the same.