If I have multiple windows open and close the current one, the screen continues to show the contents of the closed window although the model tree changes to show the active model tree. If I have multiple windows open then the tabs at the bottom of the screen correctly show the active window.
View 2 RepliesInfo:
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
When I section a view and edit the hatches, the 'Edit Hatch Pattern' window always opens off-screen. I have changed the settings in the GPU control panel to have everything open on the last window, but this window will not abide. I move the window to the Inventor window (monitor 2), but it will re-open back to monitor 1 in the exact same position every time.
The 'Edit Hatch Pattern' window seems to be the only window that does this in Inventor. Attached is a screen cap of the issue. The window opens in the same place each time.
OS: Windows 7 Pro
CPU: AMD FX-8350 @4.2ghz
GPU: Nvidia Quadro K4000
Monitors: Dual Asus 24" 1920x1080
Memory: 16gb
GPU Control Panel: Nvidia Version 331.65 for Quadro K4000
Autodesk Platform: Product Design Suite 2014
How to get my window back with all my color palettes. I accidentally closed it and for the life of me can't get it back.
View 1 Replies View RelatedI'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I have used PEDIT to join multiple polylines, which now appear as polylines. But when I use QSELECT to show all open (non-closed) section, one polyline still shows up as open.
I've attached the file I'm working on. The polyline in question is the green outline on the object on the right.
I had the properties window docked on the right side of my screen before I reinstalled ACAD LT 2009. Now I can't figure out how to get it back.
View 9 Replies View RelatedThe “window selection” selects only what appears on the screen! I wanted to select a page number located on the lower left corner of each title block of each drawing but found out that the “window selection” doesn’t keep selecting what doesn’t appear on the screen (if zoom in is applied)! For example, if I select a number of drawings and “zoom in” is applied then the window selection will only keep selecting what appears only on the screen!
Then how to let the “window selection” keep selecting all the objects regarding whether they appear on the screen or not?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I want to show one entity middle of the screen and highlight it? Maybe use zoom?
View 2 Replies View RelatedIs there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
through the groups here I have found the redefine screenmenu command, but I cannot find how to get the screen menu up on the screen as it is not an option in the display options any longer.
View 4 Replies View RelatedIve booted my computer up and started Photoshop. i use a second screen, its installed automatically on Mac OSX 1.8. Now, when i drag the file to th second screen, it appears to become black. if i drag it back to my Home-Screen, the content appears. Resizing don't change anything as well as disable the graphic processor on Photoshop.
A second restart solves the issue. but i don't want to restart my machine every time when i work on Photoshop.
I have a netbook Acer AspireOne D255e, which max resolution is 1024x600. When I try to run GIMP, it's impossible to use it, because all the tools disappear on the window.
Is there the possibility to resize the GIMP window to fit on my screen?
Is there anyway of plotting a cad drawing from the model view screen so that certain linescales show? At the moment when I plot it will show hatched items without the outlines.
View 9 Replies View Relatedi want to have multiple offsetoutlines on a closed or non-closed path. with "offset path" i can make only one additional outline but i need multiple?
i searched all over the net for answers with no success.
How can I create closed profile in VBA Suppose this profile includes Line and Spline See attached code in vb
Later I cannot create Extrude feature because previously created profile is open (consists of two separate curves)
How can I join together points in profile which belongs to separate curves to get one curve.
Dim t As Inventor.TransientGeometry
Set t = ThisApplication.TransientGeometry
Dim c As Inventor.ComponentDefinition
Set c = ThisApplication.ActiveDocument.ComponentDefinition
[Code].....
i want show thumbnail psd file in windown 7 64 bit.
View 3 Replies View RelatedWhen I open a picture in photoshop, the window is not big enough to show it all. When I drag it to my retina monitor on my laptop, it scales down. Why can't adobe figure this stuff out? It used to be that your image would open as large as possible on your monitor, and would show the entire image.
If it was larger than your monitor could display, it would scale it to 66.7% or 25% etc so it would fit. I liked that better than this way - now you just see the top corner of your image and have to drag the window larger to see it.
How to show dimensions for window in plan , instead of default hexagon (number)
For example 60" x 48"
The window type showed up in the window schedule. But the window dimension didn't.
What's the reason of it? I know you can enter the dimension directly into the schedule. But it would be nice if it comes it automatically. See attached file.
How do you set the view range to show a window with a sill height of 5'-0" and a dog door with a head height of 2' in the same wall on a floor plan view?
View 3 Replies View RelatedI tried to use shortcut Ctrl+L to access Level... But, my Photoshop Elements 9 did not respond and the Level window did not show up.
View 5 Replies View RelatedMy copy of PS CS6 has problems sizing the document window. In Standard Screen mode it does not enlarge the window to fit the screen.
In Full Screen Mode (with and without Menu Bar) it will not size the image to fit the screen. The gray area extends way below the bottom of the display and does not have the bar containing size percentage and other information at the bottom.
I have the impression Photoshop does not read the display's size information and therefore doesn't know what to do. It's an Apple Cinamea 23" display. ATI Radeon HD 4870 video card. OS X 10.6.8.
"fit on screen" and command+0 resize window despite "zoom resizes window" being disabled in PS preferences.
- How do i disable the resizing of the window for this scenario?
- Why? I work on two levels frequently - manipulating details, command-0 for checking the whole, and then zooming back into details. Command+0 resizes and repositions my window disregarding my specific window layout. Fullscreen is sadly no option, i usually work on multiple windows side by side specificly arranged.
I recently installed / upgraded to CS5.1, set up all my preferences, keyboard shortcuts, presets, plugins. All worked fine, day in - day out, for the last three weeks. About three days ago this anomaly appeared...
When I zoom in (cmd +/), the window will resize, but only part way. The window will move over flush right on the monitor, but leave about one inch of space between the window and the left side of the monitor, and increase in size until it fits aprox 2/3rds of the monitor / screen. It stops enlarging and leaves about 3 inches of space between the window and the bottom of the screen. At that point I get scroll bars. So I end up with a much smaller window to work in.
I can grab the bottom right corner of the window, pull it open to fill the screen, but as soon as I go to zoom in or out, the window jumps back to the smaller size with the gap on the left side and bottom.
Option bar is "Standard Screen Mode"
All my pallets are on a separate monitor, so nothing else is on my main monitor that would limit the size of my window as I zoom in.
My preferences are set to:
• Zoom Resizes Windows
• Enable Flick Panning (works fine)
• Animated Zoom
OS 10.5x
10GB ram
I don't know if I inadvertently changed something to cause this.
I am not sure how this happened, but using PSPX3, when i need a new layer, the dialogue window is way to the top. The values and all are accessible but when i am doing live presentations or recording tutorials, this is an annoyance. It is so high that i cannot grab the top of the window and pull it down. It is only for that one dialogue window and only for that one PSP version.
I tried resetting the workspace to default, i tried reloading an old workspace, but that one stubborn dialogue window is still there on top.
I tried changing the screen resolution temporarily to see if i could "grab it" to move it back down, but it still is "ungrabbable".
When I open illustrator CS6 or InDesign I always want to be able to view my desktop so I can access files. Why has CS4, 5 and 6 gone full screen when you open files. Is there a way to prevent full screen mode? I am getting so tired of dragging the bottom right corner to make the window smaller. I'm using a mac, 10.7.5
View 3 Replies View RelatedMy Elements 10 window is to big for my monitor screen and there seems to be no way that I can make it smaller. I cannot see the green x and I cannot click and drag the window. I am using a MAC computer.
View 8 Replies View RelatedI am trying to import a complex curve from autocad lt (in my case an airfoil), to create parts. I have drawn the curve in autocad lt as a polyline. Autocad lt treats the curve as a single object, and seems to understand it as a closed loop.
When I import the curve into Inventor lt, Inventor treats the curve as a series of unconnected line segments. What can I do in either Autocad lt or Inventor lt to get Inventor to treat the curve as a single object, so that I can then extrude it?
I am making some fairly free form sketches using lots of 3-point arcs that ultimately need to be closed loops so that I can extrude them. Although I have always been letting one arc snap to another at the end of the process I seem to have trouble closing the loop. It does not seem very apparent how to find the points that are not properly closed and I wind up struggling with the Close Loop function. Is there an easy way to tell where the problems are in a profile? I have tried showing all constraints, but that doesn't necessarily give me the clues I need.
View 5 Replies View RelatedWhy won't my welcome window show initially even when I select it to do so?
View 3 Replies View RelatedWhen I am editing a picture in Photoshop, I use a lot of keyboard shortcuts for curves, hue/saturation, etc. but I get frustrated that the box shows up right in the middle of the screen, over the picture I am trying to edit. This makes me have to move it out of the way with the mouse to see what the changes will look like. Is there a way to have it default it popping up to a corner of the screen or even a way to move it without having to grab the mouse?. It is my #1 Photoshop frustration and I figure there is a way that I just can't seem to find it.
View 2 Replies View Related