I'd like to add a dimension from a feature in a detail view to a feature outside the view, exactly like the dimension circled in red below. I cannot find any information on how to do this, but I suspect it is pretty easy!
View 4 RepliesIn my assembly drawing I have been able to add random dimensions anywhere I needed them.
Except for the detail view. How come I can select the two end points for my dimension, but it wont let me place it?
(Colossians 3:23-25)
I would like to generate a rectangular pattern of extruded tubes which have an internal radius that is proportional to the distance to the centre point of the pattern. Or in other words tubes which are narrower in the centre, and wider at the exterior. Is there a way to do this without resorting to creating each tube individually?
More generally, is there a way to parameterise a feature dimension/parameter so that it is a function of spatial position?
If certain modelling / sketch features should be avoided under the machining feature group.
I have an assembly file containing three part files, plus a weldment feature and machining features. In the real world this sub-assembly represents two metal components welded together, of which the third (plastic) component is then inserted, and this is followed by the final machining process - adding the staggered slot (see jpeg 1).
My problem is I get an error message as soon as I try to activate editing the weldment feature group (see jpeg 2). Clicking ‘Accept’ I can then edit the current weld, but I can not add any new welds. Inventor will let me choose to place a new fillet or groove weld, and even show a preview (see jpeg 3). But on clicking ‘Ok’ or ‘Apply’ I get another error message from which it won’t let me proceed (see jpeg 4 (in my second post)).
The error messages relate to the constraints placed on the work planes used to achieve the model features (extrusions, revolutions, chamfers, etc) under the machining features group.
A couple of points; the weld(s) have to proceed the machining features so each manufacturing stage can be clearly illustrated on the drawing of the sub-assembly. And yes in this case I could remodel the assembly, but it is time consuming and regularly our customers will want the design tweaked, so having to remodel every time would be unacceptable. Thirdly, I believe the work planes are needed to constrain the sketches (see jpeg 5 (in my second post) - the work plane is constrained to the ‘red highlighted dot’ and tangent to the cylindrical face).
I have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I am making a multiview drawing with isometric of a certain sheet metal part. Due to manufacturing reasons, they have to make the part longer than necessary to get a bend in it then I will have them shear off the extra. Is there a way I can show the multiview and flat pattern WITH the extra material and show the isometric WITHOUT that extra? In the model I remove the excess with a cut but I don't know how to suppress a feature for one view and not another.
View 2 Replies View RelatedI am trying to hide an extruded cut in one view of my .idw. I have tried supressing in one view but this does not work. I need to show a before and after of this cut in the same model. I can not make two models because this is a controlled document.
View 5 Replies View RelatedWhen I create a section view in the idw, hidden lines are visible in the cutting part ! How disable these hidden lines and show only the hidden features ?
View 3 Replies View RelatedCan the API be used to select feature edges in a drawing view and assign them to a layer? I am using IV10.
View 6 Replies View RelatedWhen you have a part with a thread feature, the default setting should show the thread feature in the drawing view...rather than making the user right click the view and select "Display Thread Feature". I don't understand why this doesn't show up in the drawing automatically...it is, after all, a feature on the part.
View 3 Replies View RelatedI have had to revise a part that someone else created at some earlier date.They used the ordinate dimensions, which works perfectly and looks good.
I have had to add some holes to this part, but can not figure out how to add more dimensions to the existing ones, outside of deleting the dimensions and dimensioning them all over again.
How do I add more ordinate dimensions to the existing?
I am new to inventor and from a Solidworks background so parts are similar to me.
I am also new to my workplace and part of my job is to clean up and produce some of our CAD files. We are missing drawings from design documentation and I have decided to start there.
How do am I able to add Dimensions into .idw files other than the Retrieve dimensions function?
In other words how can I add dimensions at will?
I am finally getting time to do some organizational cleanup and management with our templates and vault settings. Many of the things are items that I am altering for each drawing/model I make and I would like to make them "stick" for the company standards. Things like altering font size in the styles library, adding part dimensions to the parameters for the parts list, and creating a new content central library where our part numbers are already populated for the parts list and the structural shapes have datum planes in the middle rather than just at beginning and end.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
I need to find out the view a retrieved dimension belongs to - is there a API call available?
View 2 Replies View RelatedIs there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedI have dimensioned hundreds of drawings with the Ordinate Dimension command in Inventor 5.1. I'm now using Inventor 2011 and I'm having lots of issues using this command. When I first set up the dimensions, I can't get the dimensions to default close to the view. They almost always want to be on the very edge of the title block. I don't think this is a sttings problem, because occasionally they will lock to where I want them. What am I doing wrong?
The first attachment is how they go on their own. In the second attachment, I have manually moved them, but at 1 dimension per move, it's slow, and also hard to keep the all aligned.
Autodesk Inventor 2011
AutoCAD Mechanical 2011
Recently when I have placed a view of an assembly into an idw drawing, then try to dimension distances between parts it gives me strange looking dimensions, or no dimensions at all. It looks as though the dimensions are going from the edges of each part at different angles, when I want them to be parallel to the view. I just want the dimension from a line to a line in that view as though it is 2d, but it is acting like it is still in 3d. I do not know if their is a setting that will change this or not.
I attached a screen shot of what the dimensions look like.
I found that I can right click a dimension in a drawing and select "Move Dimension" which then prompts me to select an alternative view in which I want the dimension placed. Is it possible to control-click multiple dimensions once to do this all in one fell swoop (e.g. I decided my view is too busy and want to move dimensions to a newly created detail view of that area)?
I'm using Inventor 2010
I have a program that create a bunch of new custom Iprop in each part of an assembly.
How can I show all those new properties when I open the BOM in the assembly file. Manually I can add a custom column but that is time consuming. Is there a way I can create a macro that will add those custom column in the BOM view?
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
Im making a window that is 300” I divide it up into 9 equal parts autocad lt 2012 divides it up @ 31 1/8” that is 280 1/8”.
The mullions are two inches wide and there is 10 of them that equals 20” the caulk joints are 3/8” there are two of them that equals 3/4".
So 280 1/8” + 20” = 300 1/8” + 3/4 “ = 300 7/8”
I'm trying to add dimensions to my 3d drawing and can get it to work sometimes and sometimes I can't.
I attempt to do a dimension from the base of a pole to a ground anchor 32' away.
I receive the following message: Oblique, non-uniformly scaled objects were ignored. Specify dimension lin locaiton or
{Mtext/Text/Angle}
I belive it has something to do with getting the UCS set up correctly, I've re-oriented my UCS several time and get no dimensions.
I am using it for producing 2D drawings for some simple prototyping.
I am having trouble with two things - Adding dimensions for when I print the image. At the moment I can add dimensions using the constraint tool but I cant seem to find a way to add concise dimensions specifically for printing.
Also is there a feature or a format that I can make 2d images specifically for printing? Perhaps there is a file format?
I am having a problem when adding dimensions to my drawings.
The problem is when adding either radius dimension or diameter dimension. When adding dimensions to circles the dimension line goes right through the middle of the circle rather than just touching the edge.
This is a questions about workflow:
I have a rendering image in PNG format that I want to have dimension. These dimensions will be in all 3 planes.
I want them allinged to object sort of like what you get when you view dimensons in perspective (first arrow is bigger than second arrow text is getting smaller as it goes further away etc.).
Currently I import my image and draw each arrow, each line, slant the text and it looks so-so... not the greatest and it is A LOT OF WORK. Then i print the dimensions to and image and combine the rendering and image in GIMP.
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
I have a question about Radial dimensions... I am trying to add a piece of text (TYP.) to a Radial Dimension... When I add the text; it makes the text and dim line move further from the arrowhead (see image)
I want to be able to move the text on the dimension closer to the arrowhead without actually exploding it... my current solution is to separate the text (TYP.) from the dimension (see image)
Is there a variable or setting to shorten the length of the dim line on the dimension?
I have programs that at some point or another create dimensions for what was drawn. When you have a vertical dimension that doesn't fit between the extension lines, it will either go up and to the right or down and to the left.
I can change it manually by selecting the dimension and then right click and pick Dim Text position > Move with leader.
What I want to know is, is there a way to set the vertical dimension where you want it programatically? I would like to put the vertical dimension down and to the right of the arrows if possible.
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
The problem: I add a dimension in Model Space, but it is not visible in Layout. No problem with drawing items, only dimensions. After some "floundering" (not an official AutoDesk term), I see the dimension in Layout. Don't know what I'm doing wrong, or how I manage to get the dimensions to show again.
LT 2011
Windows XP
How can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies View Related