AutoCAD Inventor :: View Of Retrieved Dimensions
Mar 12, 2012I need to find out the view a retrieved dimension belongs to - is there a API call available?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Decimal Precision For Retrieved Dimensions
Sep 21, 2011I have had a problem with retrieved dimensions decimal precision. I set the precision to 1 decimal place in the ipt but when I retrive the dimension it set the precision to 3 decimal places. I then go to the precision control in the drawing and change it to 1 decimal place.
If I then go back to the ipt and edit the dim, the drawing precision then jumps back to 3 decimal places. (This is particular to the decimal precision for the tolerance of a dimension). How to sort this out?
AutoCAD Inventor :: How To Rotate Text On Retrieved Dimensions In Drawings
Jan 30, 2012I frequently use tolerance and fits when modelling and retreive them to use them in drawings. The text on these dimensions is always horizontal . Any time I have vertical dimension on drawings (e.g. several diameters in a stepped bore) the horizontal text takes up way too much real estate. e.g. 18.0000 g6 (17.999 17.998)
I would like to align the text to the dimension lines (i.e. text vertical in this case) In Properties Rotate is greyed out. Is there a way to keep my retrieved dims and have them aligned with the dim lines in the drawing?
AutoCAD Inventor :: Adding Dimensions To Features Outside Of View?
Mar 13, 2013I'd like to add a dimension from a feature in a detail view to a feature outside the view, exactly like the dimension circled in red below. I cannot find any information on how to do this, but I suspect it is pretty easy!
View 4 Replies View RelatedAutoCAD Inventor :: Adding Dimensions To Detail View
Feb 24, 2012In my assembly drawing I have been able to add random dimensions anywhere I needed them.
Except for the detail view. How come I can select the two end points for my dimension, but it wont let me place it?
(Colossians 3:23-25)
AutoCAD Inventor :: Can't Get Dimensions To Default Close To The View
Mar 8, 2012I have dimensioned hundreds of drawings with the Ordinate Dimension command in Inventor 5.1. I'm now using Inventor 2011 and I'm having lots of issues using this command. When I first set up the dimensions, I can't get the dimensions to default close to the view. They almost always want to be on the very edge of the title block. I don't think this is a sttings problem, because occasionally they will lock to where I want them. What am I doing wrong?
The first attachment is how they go on their own. In the second attachment, I have manually moved them, but at 1 dimension per move, it's slow, and also hard to keep the all aligned.
Autodesk Inventor 2011
AutoCAD Mechanical 2011
AutoCAD Inventor :: Placed View Of Assembly In IDW Drawing - No Dimensions
Sep 21, 2012Recently when I have placed a view of an assembly into an idw drawing, then try to dimension distances between parts it gives me strange looking dimensions, or no dimensions at all. It looks as though the dimensions are going from the edges of each part at different angles, when I want them to be parallel to the view. I just want the dimension from a line to a line in that view as though it is 2d, but it is acting like it is still in 3d. I do not know if their is a setting that will change this or not.
I attached a screen shot of what the dimensions look like.
AutoCAD Inventor :: Move Multiple Dimensions From One View To Another In Drawing
Jun 5, 2012I found that I can right click a dimension in a drawing and select "Move Dimension" which then prompts me to select an alternative view in which I want the dimension placed. Is it possible to control-click multiple dimensions once to do this all in one fell swoop (e.g. I decided my view is too busy and want to move dimensions to a newly created detail view of that area)?
I'm using Inventor 2010
AutoCAD Architecture :: Dimensions And Stair Well In View To Show In Sheet View
Aug 11, 2012How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
AutoCAD Inventor :: Inserted Hole Dimensions Not Matching Feature Dimensions
Mar 16, 2012I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
AutoCAD Inventor :: Lock The Dimensions To Aligned Dimensions?
Aug 22, 2012is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
Photoshop :: Can Erased Files Be Retrieved?
Aug 21, 2008I saved a .psd as a flattened image. Is it possible to retrieve the former version that has all of my layers?
View 1 Replies View RelatedAutoCAD LT :: Dimensions Not Visible In Layout View
Jul 26, 2011The problem: I add a dimension in Model Space, but it is not visible in Layout. No problem with drawing items, only dimensions. After some "floundering" (not an official AutoDesk term), I see the dimension in Layout. Don't know what I'm doing wrong, or how I manage to get the dimensions to show again.
LT 2011
Windows XP
AutoCAD LT :: Get Annotative Dimensions In View Port
Dec 8, 2011How can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies View RelatedAutoCad :: Dimensions Not Visible In Front View
Aug 9, 2012i have a problem of net being able to view dimensions in the model space in the current view. i was not paying attention to what view i started the 2d drawing in, but right now it is in the front view. the dimensions lines gets put on a plane that the program has decided and wheather i try to dimension above or below it, it goes to that line. i have also noticed that for some unknown reason the 2d drawing gave itself depth. it is a very large drawing and i have tried to clip parts of it to put on a new drawing it defalts to the front view and i still cannot dimension on it.
I am using arch 2009, and the program did get corrupt during my work and had to reinstall. i have reinstalled several time with the same result. i have tried arch 2011 also with the same result. i think there is a setting that somehow changed and i can't figure out what it is, or should i chalk this up to a program malfunction and start from scratch in a top view (which works fine).
AutoCad :: How To Get Orthographic / Isometric View (with Some Dimensions) From Object
Apr 25, 2011i'm wondering how to get orthographic views isometric view (with some dimentions) from an object ive already assembled with proengineer (student).
View 1 Replies View RelatedAutoCad :: Draw Dimensions In Architecture 2013 3D View?
Dec 12, 2012How do i draw dimensions in a certain 3d view so that it shows up according to that view? For example, I'm in isometric view but when i draw a dimension it shows up in 2d at wrong angle.
View 7 Replies View RelatedAutoCad :: When To Add Dimensions To 3D Object In Isometric (or Similar) View
May 26, 2011When I add dimensions to an 3d object in an isometric (or similar) view, the dimension lines get placed way off screen, and the leader lines are projected onto the x-y plane.
Additionally, when I try to add lines to an object that is far from the x-y plane, the mouse position responds to the line's location as if it were drawing on the x-y plane.
Do I have to continually make custom UCS coordinates just to draw in 3d without hassle? There are other times when this does not happen (perhaps only when my 3d object is very near the x-y plane...
AutoCAD 2013 :: Dimensions Randomly Takes Scale Of View Port
Jun 21, 2013At times when I am dimensioning a dwg in paperspace one of the dimensions will assume the viewport scale when the dwg does a regen. Its as if the DIMLFAC will be set to something other than 1but its only for one or two dimensions. I check the DIMLFAC var for thje dwg and its set properly to (1). Since I am dimensioning in paperspace i have the DIMASSOC set to (2).
As you can imagine this is a huge problem when I send the dwg out for fabrication. What is the problem and how can I stop this from happening on random dwgs to random dimensions?
3ds Max :: Is It Possible To Have 2D View With Dimensions
Dec 18, 2012I'm a new user of 3DS Max and i'm looking for an option or a plugin which would allow me to have a 2D view whith dimension of the room I've designed in 3D. Attached are 2 pictures of what I'm talking about that are coming from another software.
View 3 Replies View RelatedAutoCAD Inventor :: Get Sheet Number Of Base View For Selected Child View
Jun 21, 2013Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedAutoCAD Inventor :: How To Pass Break From Sectioned View To Separate Isometric View
Jun 27, 2012I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Unable To Remove Hidden Line From View To Get Shaded View
Sep 23, 2013I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another
May 6, 2013Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Detail View Arrows And View Annotation Are Not Showing
Apr 26, 2012I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Make Exploded View Trail Lines Exempt From View Break Out?
Oct 31, 2013I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update
Sep 27, 2013After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
AutoCAD Inventor :: Create Detail View Of Isometric View In IDW?
Oct 3, 2013Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedAutoCAD Inventor :: Showing Section View In Base View
Dec 13, 2012how to show section view in base view with out projection the component.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Section View As Isometric View
Oct 29, 2013I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
AutoCAD Inventor :: Way To Save A Section View In Assembly As View Rep
Mar 13, 2013Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View Related
