I'm trying to get Inventor 2012 (64 bit) to show the complementary angle to the bend angle in the bend annotation on a flat pattern within a drawing. I.e. the bend annotation shows: "10 UP" for a ten degree bend. I want it to show: "10 (170) up, where 170 degrees would be the complement to that angle, automatically. I know I could type it in, but then it will not update itself if I change that angle.
View 9 Replies
Does inventor allow you to place the flat pattern of 2 different parts on the same drawing? We have instances where we have items 01 and 02 detailed on the same drawings(carry over from board days, and other CAD system) and need to show a flat pattern of them both but Inventor will not allow us to choose the flat pattern view for the second part.
Inventor Pro 2010
I am having nearly 30 to 20 flatpatterns in .dxf format I just want to confirm whether the scale is 1:1 or not that just a cross verification. What is the best practice to check?
View 4 Replies View RelatedI am trying to join two parts in their flat pattern state - either in the drawing or physically.
these two curved parts are adjacent but have different unfolding strategies so Inventor makes me seperate them. I would like to cut these parts out on my cnc as one piece - but I am having difficulty accurately joining these parts.
(one is a curved part & one is a twist - both can generate a flat pattern)
I can make drawing views of both parts in their flat pattern state but I don't know how to (or even if it is possible) to connect these two parts and export them like one piece. I have tried to export to .dxf & then import into a new part file - but that was a big mess.
I can import the .dxf into ACAD & then join them but I would like to keep as much in Inventor as possible.
I have an iLogic rule that automatically adds center lines to cylindrical elements and holes. It runs on save. Is there a way to
A) Make that rule loop through each sheet in the drawing file? Right now it loops through each view on the active sheet and I'm not sure how to get the total sheet count to make another loop for that.
B) Is there a way I can conditionally check if the view is a flat pattern or not? I'd like to use an IF statement to exclude applying the center marks to the flat.
I'm currently working on a Spa design and using new tools which is all new to me. I've used Draft Angles before but on a spa where you sit normally the sit reclines back.
Now I'm not sure how to do / show this in a 3D drawing. I've read and serached for different things but have yet to find something similar I'm looking for.
I've attached a PDF along with the circled area as to what I'm trying to accoomplish. Wanna be able to show the dip etc via Inventor.
I want to be able to use the same dimension parameter as a previous component pattern to create a new component pattern. Is there a way to be able to do this? On features, you can use the Show Dimension and then select the dimension you want. With rectangular patterns I don't see a way to do this and there is no way to even note which parameter it gave it as it is being created. I guess I could name the parameter on the fly and then use that same name, but was wondering if there was a different way.
View 2 Replies View RelatedIt's my first time using sheet metal in a drawing and I can't figure out how to show flat pattern in the drawing. When I insert the base view into my drawing, the bottom to "Sheet Metal View" to "Flat Pattern" is shown, but it's ghosted out so I can't select it. Is there something I have to do in the part drawing in order to activate this feature?
View 2 Replies View RelatedIf AutoCAD 08 has the ability to create wire frame arrows without building them from scratch? I'm trying to show circulation patterns on a landscape plan. I'd like to be able to click and drag like a polyline etc.
View 9 Replies View RelatedI can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Why won't a pattern fill I used in an Illustrator CS5 file show up when I save as a pdf?
View 32 Replies View RelatedI am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
In a part file is it possible to find the adaptive workplanes used to create extrusion1. And then find if the two workplanes are at an angle with respect to the origin planes.
Have been looking for a while but it seems hard to find information on workplanes
In the course of working up a tooling proposal, I attempted to replicate a 3D part from a customer print. While doing so, I noticed that 3D Sketch will not, under any circumstances that I can find, allow an angular dimension between a line and a plane. The customer print has two pipes projecting at odd angles from a base flange, one of which has an elbow. The print lists datum dimensions for the open pipe ends and the elbow, and gives vertical and horizontal angular dimensions to define the directions in which the pipes emerge from the flange. I have defined these three datum points in 3D space without any trouble, but Inventor 2013 will not allow me to define an angle between these sketchlines and the XZ and YZ origin planes, or between these sketchlines and the faces of the flange base I've constructed.
I am currently waiting on a proper 3D CAD model from the customer, and I'm considering longhand trigonometric calculations to place these lines properly, but I find it very hard to believe that Inventor is incapable of constraining a line to lie along what is effectively the surface of a cone.
Using:
Inventor 2013
AutoCAD 2013
I am using inventor 2012. Is there a way to ordinate dimension angles? For example dimensioning an irregular bolt pattern in a flange.
View 3 Replies View RelatedThe issue I have with Inventor 2010 is when i dimension a rectangle to be 44 in wide and 79 in height it becomes a slated rectangle. This event occurs on the work version of Inventor 2010. I have an educational version of Inventor 2010 at home and when I tried this same dimension rectangle at home it didn't have this issue. Is there a setting I need to turn off to fix this.
View 1 Replies View RelatedI often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
I'm having problems getting Inventor to dimension using the current view option on an assembly. I ungrounded the assembly and constrained it to the angled work planes that I needed so I have to use the current view option, but when I try to dimension to the intersection of the angles, it won't give me a dimension.I'm using Inventor 2011.
View 1 Replies View RelatedI need to create an axonometric view of a model with specific angles (see attached). What is the best and quickest way to do this?
View 4 Replies View RelatedI have just created a cylindrical object with an extrusion length of 300 mm and then created an assy(.iam). On to this cylinder i have placed a plate at right angles to the axis of the cylinder
What i wish to do now is mirror this plate.
It would appear the best way would be to create a work plane(mirror plane) thro the centre
Of the cylinder,however, how can this be done if when requested to create the plane 3 points are required,am i missing something here.
I am trying to create flanges on the inside of a cut angle from a contour flange based drawing see attached file. I am not able to get the flanges to attach since the material thickness varies due to the cut.
View 8 Replies View RelatedI am trying to create a rectangle panel wood with sides with different angles (700x1000mm and thick of 15mm) 2 sides need to be 45degres and the 2 other 25degres.
I have tried withh the Extrude and taper function ...but this doesn t let me create different angles(taper) on each sides.
What would be the best way to do this? What other function could i use?
To be able to folderize component patterns seems to have been surpassed once again in release 2012. However, I am wondering if this is a setting issue yet I cannot find settings for what can and cannot be placed in folders, if they exist. And I wonder if it is a setting issue because during a training class I visibly watched the trainer place component patterns into a folder and once I still cannot do so.
View 9 Replies View Relatedcreated any custom hatch patterns for Inventor , If so, how?
View 3 Replies View RelatedWe have multiple parts where we need a large amount of holes being patterned with the rectangular feature. why is this process and everything afterwards so ridiculously slow.? it is really driving me nuts! In solidworks this is no problem at all.
Win 7 64bit
Intel i5 560 4x3,2GHz
8 GB RAM
Nvidia quadro 4000
I have big assembly and I want to get quick selection by cube or sphere or simple window. But if some elements (parts or assemblies) are in the pattern, they also selects. I don't need these other elements in the pattern.
View 9 Replies View RelatedI can easily move component patterns into a folder as long as all patterns are sequential in the browser. However if I create another pattern that belongs to the folder but is created after the original patterns I cannot add it to the folder. If I delete the folder and select the patterns I get an error message if I try to add them to a new folder (remember the patterns are not sequential). I cannot move a pattern in the browser once created and if I move the part into the folder and then create the pattern it moves it back to the bottom of browser. The net result is I end up with a lot of 'orphaned' patterns.
View 2 Replies View RelatedI need to select various shading patterns in a section view drawing and assign all the same settings using VBasic but can not find the way to go. For example, all a 45 degree angle and scale to 0.25.
View 3 Replies View RelatedInventor 2010 Style and Standard Editor includes 35 CUST## hatches. My guess is, it stands for custom. Is there a way to import hatch patterns from AutoCAD PAT file? This functionality is available for line types through importing AutoCAD LIN file.
Xeon CPU 3.6GHz
Nvidia Quadro FX 3400
Driver version 6.14.11.8246
Win XP Pro (32) SP3
4GB RAM w/o 3GB switch
AIS 2010 SP1
Can I create more than one pattern from the same base component? For example, pattern a bolt in the center of a plate into one quadrant using pattern 1 and then into another quadrant using pattern 2.
View 6 Replies View RelatedI'm stuck on a few different emboss cases. The following examples are just dumbed-down models to learn from. If it matters - I'm actually embossing patterns on more complicated parts - not text on primitive shapes.
Case 1: Emboss across several surfaces. Please see attached file "Wrap Emboss 1". I can wrap to a face - but not all three faces on the solid that I want my "TEST TEST TEST" message to span across. My embossed text goes off into space - it doesn't wrap around the edge of the solid as desired.
Case 2: Emboss text (or some other arbitrary shape) onto a single (but compound) surface. Please see file "Compound Emboss 2". If the curvature of the part isn't significant - there are a few ways to fake/trick out the model to get a passable result. BUT - when the curvature of the surface is significant relative to size of the text/pattern to be embossed - I haven't yet found a solution that doesn't wildly distort the embossed feature. As the surface of the part is compound - I can't use the "Wrap to Face" option without an error. The resulting embossed feature is unacceptable.
