Can I create more than one pattern from the same base component? For example, pattern a bolt in the center of a plate into one quadrant using pattern 1 and then into another quadrant using pattern 2.
View 6 RepliesTo be able to folderize component patterns seems to have been surpassed once again in release 2012. However, I am wondering if this is a setting issue yet I cannot find settings for what can and cannot be placed in folders, if they exist. And I wonder if it is a setting issue because during a training class I visibly watched the trainer place component patterns into a folder and once I still cannot do so.
View 9 Replies View RelatedI can easily move component patterns into a folder as long as all patterns are sequential in the browser. However if I create another pattern that belongs to the folder but is created after the original patterns I cannot add it to the folder. If I delete the folder and select the patterns I get an error message if I try to add them to a new folder (remember the patterns are not sequential). I cannot move a pattern in the browser once created and if I move the part into the folder and then create the pattern it moves it back to the bottom of browser. The net result is I end up with a lot of 'orphaned' patterns.
View 2 Replies View RelatedI want to be able to use the same dimension parameter as a previous component pattern to create a new component pattern. Is there a way to be able to do this? On features, you can use the Show Dimension and then select the dimension you want. With rectangular patterns I don't see a way to do this and there is no way to even note which parameter it gave it as it is being created. I guess I could name the parameter on the fly and then use that same name, but was wondering if there was a different way.
View 2 Replies View RelatedI have an i assembly with some lengthy and unique ilogic to control what parts are included / excluded based on user inputs in a form. To begin, the program includes all components, and then excludes the ones that aren't needed. This is basically, briefly what the first part of that looks like:
For Each oCompOcc In oCompDef.Occurrences
i=i+1
'Include all currently excluded components
If oCompOcc.Excluded=True Then
oAssObj=oCompDef.Occurrences.Item(i)
oDoc.SelectSet.Select(oAssObj)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()InventorVb.DocumentUpdate()
Else
End If
Next
InventorVb.DocumentUpdate()
So this works just fine, mostly. I run into an issue with the component occurrences that are within patterns (I have 2 patterns - 1 circular and 1 rectangular). This code will "Include" all occurrences inside an "Excluded" pattern, but the pattern itself remains "Excluded". In other words, in the browser, the pattern name appears greyed out and crossed out, but all the elements and the components within them appear "alive", so to speak. But the BOM indicates a Qty. of ZERO for these components since the pattern that.
I can toggle include / exclude of patterns using the same method:
oDoc.SelectSet.Select(oPattern)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()
But it seems I can't identify which patterns are excluded to start with, like:
If oPattern.Excluded=True Then...
I get an error when I try this. Is there a way around it? How can I find and select excluded component patterns in order to toggle them to "Include"?
Is there and easy way to change the base component of a derived part?
The way I use to do it, is to rename the base component. Then open the derived part, and point to the new base component after the "error message".
In the idw environment there is a "Replace Model Reference"" which does it for 2D drawings.
btw. I use Inventor 2013.
Is there a way to select more then one component when patterning in an assembly?
View 5 Replies View RelatedI have created an assembly with multiple views to show the multiple configurations of our products. However, half way down the line I realized I had forgotten to place a component. When I placed the component, I found that it had been placed in all the views automatically. Is there a way to select the views to place the components in or to prevent the component from being placed in any of the custom views except the default view?
View 2 Replies View RelatedI use a "dump assembly" of assemblies to create cut lists. I throw in multiple copies of each assembly for the job. Sometimes it can be 100 or so of each.These are not placed in any way and could be all placed at the origin. This is only for the parts list and servers no other function.
Any way to place multiple instances of an assembly at once?
You are using an assembly with many LODs. Each time you place a component in your assembly , that one will be active in all level of Details.For some configurations, you would like one component to be active in only one LOD. Inc.
View 9 Replies View RelatedSo I have been going round and round in circles on this one iam trying to use replace component within ilogic which is fine with switching one part for another but I want a drop down of parts so it replaces which ever one is active the problem I am having is establishing which one is active. So below is what I have so far but the problem is you cant seem to reference a part that is not in the assembly so I keep getting the error
The component named "Flange 1" was not found for example. I just need a way of establishing which one is currently in the assembly but with out referencing components that are not there.
If Component.IsActive("Flange 1")=True Then current = 1
If Component.IsActive("Flange 2")=True Then current = 2
If Component.IsActive("Flange 3")=True Then current = 3
If part = 1 And current = 2 Then Component.Replace("flange 2", "Flange 1.ipt", True) End If
If part = 1 And current = 3 Then Component.Replace("flange 3", "Flange 1.ipt", True) End If
If part = 2 And current = 1 Then Component.Replace("flange 1", "Flange 2.ipt", True) End If
If part = 2 And current = 3 Then Component.Replace("flange 3", "Flange 2.ipt", True) End If
If part = 3 And current = 1 Then Component.Replace("flange 1", "Flange 3.ipt", True) End If
If part = 3 And current = 2 Then Component.Replace("flange 2", "Flange 3.ipt", True) End If
I've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf.
[code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
I have this problem with my drawing. before I decided to post here, I first ask mr. google about the problem but to no avail. anyway, here's my problem:
I have this drawing. 3d object. with multiple items. and would like to create a 2d detailed view of the items.
what i did was isolate the first item and did the base view command. after the command, I then hid the first item and isolate again the second item. but then I always get this pop-up menu that says "A model has changed" and my item is missing. I ignored the warning and poceeded with my second model and so, on. after the process I unisolated all my items and most of the drawings are there and some are lost. Is there a proper way of doing this base view for multiple objects without disrupting the previous drawing that I objects?
How can I set the multiple dimensions "ordinates" to scale correctly in base views. The old vanilla ordinate dims work fine, but power dims ordinate give me improper scaling.
View 2 Replies View RelatedI have several different views xreffed into a single view, should'nt they all share the base construct? i.e. If I want to overlay the lighting plan, HVAC plan and my reflected ceiling plan- they should share the first floor construct. Instead each one brings in the same base construct and then when you overlay them, the walls interfere and you get wall errors.
View 9 Replies View RelatedI am operating with CS5 and Windows 8.
I am unsuccessful with clicking and draging .PAT files from my presets folder in Windows Explorer into and/or around the Preset Manager window in CS5. When I click and drag, my cursor symbol makes it look like it will work but nothing happens- no .pat files are loaded in.
So, far all I can do is load one pattern at a time.
Is it possible to move/load multiple .pat files at one time?
I have over 300 patterns I need to have available on PS. How can I do them all at once?
I dropped them in the two patterns folders I've found, but the icons don't appear in the preset manager.
Is it possible to add a base depth to the transition lane assembly? I need to do volumes for my road, (pavement, base) but there is a section with a transition (which only has one depth), so that section is off.
View 5 Replies View RelatedI work in Ai to build patterns from multiple shapes and colors. At some point in the process, I use the clipping mask to crop away the parts of the build-out I don't want to see/use. Then I copy that cell/tile I want to use, and build repeated pattersn. When I bring all of these tiles together - even at 6400% - no matter how close I get the tiles to each other's edges - flush or even slightly overlapping - there is almost always a white line demarking the edges. Sometimes 3 of 4 edges appear in a centered-x/y axis, but there doesn't seem to be any rhyme or reason to it and I can not reverse engineer the cause.
I have hidden my edges. There is no stroke on a box. Even the clipping path has been checked and does not have stroke. What's going on here? This is a huge stumbling block for my business.
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
1. original
2. doubled horizontal size of the line
I'm using scatter brush to draw multiple lines with random size and angle(image 1.), and trying to increase only the horizontal size(image 2.), keeping the interval the same. But when I do, the interval is also increased since 'Spacing' option follows the size of the base object. I could adjust and decrease the spacing value, but the problem is, spacing option cannot go below 1%. So if want to increase the line size and maintain the interval, there's no way to do it. expending then scaling could work, but that's not what I want.
I want to make some points in 3D sketch base on the Coordinate System that I defined (UCS).Is there any solution to make these points in 3D sketch just by inputing their coordinates in my UCS?
Example: the new UCS origin has (x,y,z) coordinates from the origin.and one of the points has the coordinates of (x',y',z') from the UCS.
So from the origin it has the coordinates of (x+x',y+y',z+z').Is it possible to just use (x',y',z') from UCS directly to get my point?
I was wondering if there was a way to change the model my base views were linked to.
If I wanted to link the base view to a different model, would this be possible.
When I double click on the base view it shows the file path for the model that is currently chosen; however, it is all grey and I am unable to edit it or choose another file path.
How to change this? Is this even possible? Is it because I have annotated the drawing view that I am unable to change the model path?
what could have happened in an assembly when I've changed the cube front view (3D)? The projection has changed automatically (the view) in 2D. In other assemblies didn't happened the thing I've mentioned before even if I did the same thing meaning that I've modified the front view but 2D stayed in the same projection.
View 1 Replies View RelatedWhen starting a new idw, my first action is placing the base view. I would very much like to start a new 2D and have the "Drawing View" window automatically pop up. I'm not sure how to do this. Would it be part of the idw template, or is there a setting I'm oblivious to?
View 6 Replies View RelatedWe've got a new dwg template and we found that when we bring in a base view on a new drawing, the drawing changed to an idw format.
View 5 Replies View RelatedI'm trying to develop a program where I can use a base view based on the current view of a single part. The idea is basically export the contour of the part to the DXL format and save it to be used on cutting machines.
I've found something similar here, but in the context, it was necessary to use the path of the part to work, and I need it to recognize the part that is already opened.