AutoCAD Inventor :: Revit / Can't See Model Faces
Aug 1, 2013
I have a problem with getting an Inventor model into Revit. It's not the import of the model that's the problem, but the way the model displays in Revit. (It displays fine in AutoCAD, 3ds max etc - just not Revit.)
Here's the part file - it's just a simple box with a couple of split-face features on it to generate a pattern.
If I take the model into Revit, I can only see the pattern if I select the object.
Deselect the object and the pattern vanishes. Here's an unselected/selected screenshot from Revit:
Models attached - Inventor 2014 IPT and a SAT version of the same.
View 9 Replies
ADVERTISEMENT
Jan 11, 2013
i got Inventor recently, and i've been working on a model of a longboard just to teach myself how to use the tools in Inventor. right now i'm trying to color areas for the griptape pattern so i drew the 2D pattern and projected it onto the 3D model of the longboard. but when i tried to split the faces of the model along the projected pattern only a few of the projected lines split the faces. for other faces i kept getting these errors:
Create parting line failed Crane.ipt: Errors occurred during update Split11: Could not build this Split The attempted operation did not produce a meaningful result. Try with different inputs.
View 1 Replies
View Related
Sep 17, 2013
I have a model of a boat from some database. It's build from 3D faces but I would like to make it a 3D solid with a thickness of 3mm.
I can convert the faces into a surface, but i can't seem to get any of the two models into a 3D solid. I have tried thicken, convtosolid and a lot of other options without luck.
I was wondering if I could make two surfaces, one smaller than the other, place them ontop of eachother and create solid between them?
View 6 Replies
View Related
Aug 28, 2013
A customer is trying to export a model for use in Revit. When he goes to the Environments tab -> BIM Exchange and the dialog opens... He has no option for RFA files... Only ADSK. Not sure what is going on.
View 3 Replies
View Related
Jan 13, 2012
I am fairly new to 3ds Max and I would like to know if there is a way to fix my model to get rid of the triangles within the faces. And how I may prevent these errors in the future.
View 2 Replies
View Related
Aug 6, 2013
I would like to edit the faces of a model I imported into Maya, but I cannot find the face option when I right click. When I create a polygon however, it works just fine on it. Is there any way I can convert the model into a polygon?
Fully sized image in attachment.
View 1 Replies
View Related
Dec 2, 2013
how to have different colors for different wall faces? Like all have a plaster finish on the external side, but the colors are different, but when I try to change the color of the external finish, it changes it for all the walls.
View 5 Replies
View Related
Apr 19, 2012
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies
View Related
May 2, 2011
Patterns in my color scheme now extend into the middle of all walls. Is there a switch to stop the patterns at wall faces?
View 9 Replies
View Related
Sep 12, 2011
Certain exterior walls ghost out / disappear in plan when hosting a split face. This doesn't happen on all walls, and it suddenly appears on walls that were performing fine.
View 5 Replies
View Related
Sep 23, 2013
Is it possible to design a wall where the core boundary lines fall in the middle of a wall layer?
Case in point is a complex wall with an 8" foundation wall that follows a building line along its exterior face. Above that is 3'-6" of stone veneer/airspace/sheathing/6" stud/drywall. Above that is EIFS/sheathing/6" stud/drywall.
The design calls for an insulation gap between the slab and the foundation and for the top of the wall to be 6" above the first floor level. The 6" metal stud thus overhangs the top of the foundation wall by 1" on the interior side.
Ideally the floor would be flush and core would simply follow the studs but the building lines (controlled by the grid) control the placement of the foundation wall and no part of the upper wall lines up with the foundation wall. Even worse the exterior finish falls 1/2" inside the exterior of the wall below and there should be no line drawn there.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Oct 4, 2011
Am trying to convert this pump into solid ?
View 6 Replies
View Related
Jan 4, 2013
I would like to compare two faces to see if they are the same face. I have three faces and a hole feature on one of the three faces. I am trying to determine what face the hole is on(top, right, left). I can get the face the hole feature was created on as:
Set oHoleFace = oHoleFeature.PlacementDefinition.Parent.Sketch.PlanarEntity
I can get the three face objects I need to check for the hole on.
Set oTopFace = oExtrudeFeatures.Item(1).Faces.Item(13)
Set oRightFace = oExtrudeFeatures.Item(1).Faces.Item(3)
Set oLeftFace = oExtrudeFeatures.Item(1).Faces.Item(12)
Can I compare faces or do I need to use vectors? I tried comparing the InternalName of the faces but this seems to fail when there is more than 1 hole center within a hole feature.
____________________________
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
View 2 Replies
View Related
Jan 15, 2013
My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
View 1 Replies
View Related
Apr 1, 2008
Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies
View Related
Feb 14, 2012
I am trying to put a deck layout decal onto a surface. When selecting the decal command, inventor will only allow me to select the bottom surface and not the top one where I want the decal. is this achievable.
I can do it by flipping the normal and putting on a mirrored image for my decal but that seems like a lot of work
if you create a new part with a cube, sketch onto one of the surfaces and add an image, the decal will only attach to one of the availiable 2 surfaces
View 1 Replies
View Related
Feb 3, 2012
how to cut or split more than one face of a surface model in one go. The only way (it seems) is to use the Trim command for every face you need to trim, whereas I want to choose the cutting tool (a plane or face) and then choose a whole lot of faces (by holding CTRL and clicking the faces) and trim them all in one go. Is this possible? I can do this in Fusion, but Fusion is way too slow on my PC compared to Inventor.
I also tried extruding a sketch through the surfaces to cut them, but it doesn't work (Inventor complains that there aren't any solids to cut).
View 2 Replies
View Related
Oct 19, 2011
I have seen selection filter and apply selction of faces and edges.
I want to leverage this further. In a part, is it possible to simply drag a window and have inventor select all faces?
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Sep 27, 2013
I once knew how to make a plane in the middle between two parrallel faces, 2013
View 6 Replies
View Related
Apr 12, 2012
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies
View Related
Nov 20, 2013
I've attached the file (Inventor 2013). The sketch shown is a raised lip I'd like to have around a future opening. I actually want that sketch to wrap all the way around the body, but taper down to 0 in the rear as there are to be hinge plates. This is going to be a grill/smoker and there needs to be a 3/8" raised lip at the future seam of the top and bottom. Shown in the model is just the top portion.
View 8 Replies
View Related
Feb 8, 2012
How can I thicken/offset an entire part without having to select all the faces individually? The 'chain select' option is not good enough for selecting all faces/surfaces that meet and form an edge with no fillet.
Is there still no way of doing this in 2012?
View 4 Replies
View Related
Mar 26, 2012
In the initial part of the simulation promotional video [URL]....
the internal space of the valve is selected by first selecting faces, then selecting Part Priority and then Isolation, producing the combined total flow volume space. Despite repeating this procedure many times I find I am unable to create and isolate the required volume space. The inner surfaces of the valve are selected but when selecting Part Priority, part of the valve solid part highlights and the selected inner valve surfaces disappear.
I have managed to derived the volume space by subtracting a new derived part, however the example provided in the video suggests the process of defining the air space can be achieved a lot quicker.
View 2 Replies
View Related
May 19, 2011
I would love for the day that ADSK allows users to assign materials to faces and surfaces at the assembly level. I know this can be done at the part level but this practice has it's flaws when trying to have an accurate BOM and Parts List as well as other "issues" when using that method.
Take a plated part for example. At my company our structure of a plated part would look something like this:
raw material - machined part - plated part. I'm sure it;s the same at many other manufacturing companies.
Typically we will have a material spec sheet for the raw material. We will have an IPT and INV dwg of the machined part file. We then place the machine part (IPT) into an IAM to become the plated part. We do this workflow because if we chance any geometry to the child (machined part) it will update and reflect a tthe parent IAM level (plated part). This also keeps out parts list and BOM structure in-line with our MRP system. So this workflow works great for us.
However there is an issue doing it that way. Inventor doesn't allow to assign materials to faces at the assembly level which seems just wrong to me. I kind of understand why they did that but it sure would be nice to be able to assign materials to faces in IAM files. Yes I know I could acheive this by using Derived Component but then my parts list and BOM structure does not reflect the base part. It only reflects the Derived part in my Parts List. Is there a way I'm missing to alter or change the Parts List to pull info of title, part number, etc of the base part rather than the Derived?
Ideally I'd just love for one day INV to allow material assignment to faces and surfaces in the assembly level. It looks rather strange on our drawings where we do a section view of the top l;evel assembly and see parts that are technically made of brass but look to be made of chrome or zinc plating instead because of how we had to assign material to the entire body of the component at the assembly level.
View 9 Replies
View Related
Dec 27, 2013
I've currently written an application for SolidWorks that reads file that geometry in the form of faces (ie. 3 or 4 double values that represent triangular and quadirilateral faces). I am trying to create the same application to work for Autodesk Inventor, but I am having some issues.
First, I am basing my code off from the examples given in the help files. There's a lot of pointers to objects being to get to the Face creation portion, this seems to be slowing my appliation down considerable compared to the SolidWorks counterpart. SolidWorks API has a modelling method called CreatePlanarSurfaceDLL that allows me to provide an array of doubles representing the vertex points in order (x, y, Z) for each point, so the array looks like this for a triangle (P1.X, P1.Y, P1.Z, P2.X, P2.Y, P2.Z, P3.X, P3.Y, P3.Z). Is there anything similar in the Inventor API to simply the process?
Secondly, when using the example, they all have a known "shape" and therefor there are a definied number of vertices, edges, faces, etc. And when adding the faces, the known points / vertices are used. In my case, each face contains information for it's 3 or 4 vertices. I created these using the prescribed methods, but when the final surface body feature is created, and a repair is performed on it, it shows a lot of duplicate edges and vertices. Do I need to take the time and filter out all of the duplicate vertices, and point to a single vertex that may represent a vertext used by up to 3 or 4 faces?
View 1 Replies
View Related
Nov 7, 2013
I have an STL (mesh file) file that I converted into DXF file, and then imported into Inventor.
The file contains a surface (meshed) I would like to create a thickness for each face. Since, the number of faces is very large, I cannot do it manually, is there an option/ trick to select them all, or perhaps a different way to create a thickness to the meshed surface.
View 9 Replies
View Related
Sep 26, 2013
I'm trying to sweep six circles along 6 3d sketches however I receive the 'The attempted operation had problems trimming and discarding faces. Try again with different outputs.
I have been suffering with the above error message and i am at my wits end. I've tried tracing the the geometry, played dot to dot joining up the points but to no avail. Some sweeps work and others don't.
View 3 Replies
View Related
Jul 24, 2013
So it isn't a major issue but I know how measure used to show a blue line when measuring between two faces or points that it measured (by default the closest distance) but ever since installing 2014 I no longer see those lines. Any setting somewhere or if that was just removed completely?
View 9 Replies
View Related
Jul 12, 2013
I have created some curved straightening vanes to go inside a large square duct 90 degree elbow. Each vane starts with a 6" long straight section the its follows a fixed radius through 90 degrees. When I "unfold" the part the resulting face becomes two separate faces. When i right click to export as dxf i can only export one face or the other. How can I combine this into a single face to export?
View 4 Replies
View Related
Nov 18, 2012
After reading the documentation for IV 2013, I'm not sure if it's possible to create a midplane between parallel faces of two different parts or not. I've tried using the workplane buttons in both the 3D Model and the Assembly tabs with no joy.
Product Design Suite 2013 Ultimate
Windows 7 64-bit
Intel Core 2 Quad Q9300 2.5GHz
8 GB RAM
Nvidia GeForce 8800 GT
View 9 Replies
View Related
Jan 10, 2014
I have two faces of different size and am trying to sweep out a curve section between the two. But since the two faces are of different size it only follows the path with the original face selected.
View 4 Replies
View Related
