Noticed the images in the reflection from polished copper? Â In my current model, polished copper is reflecting the image of what looks to be a parking lot, as I see the back end of 3 different cars, ones white and the other two are grey I think. Â No real issue, just noticed this reflection, looks like the developers were having a little bit of fun on this one, or is there a place this reflection can be changed?
View 4 RepliesI have a sheet metal part I need to show as polished aluminum diamond plate on one side of the material only, just as it would appear on the actual part.
Inventor 2013
I'd like to make an animation of a thin copper wire being wound onto a pulley. Is this possible in Inventor? I'm not sure Inventor will allow the thin wire to be bent. I can imagine other ways to make the animation, but I'd much rather have the wire bend around the pulley as the pulley rotates.
View 1 Replies View Relatedhow to achieve a polished, reflective finish on these machined parts (see attachment)? Â I've tried all the default materials and even some of my own but can't get the results I want. Â One factor I can't solve is the location for "advanced" materials in the Create Material pulldown in Materials Browser, this selection is not listed.
View 1 Replies View RelatedI need output of png with alpha format, so I have to render in Studio.
I unchecked True Reflections but the items in the image reflect on each other.
Is there a way to stop this? see example.
1. I have a centrifugal pump assembly in which the color is Blue.How can i save the same Pump which can be available with 5 different colors.other then the Blue.This would save me changing the color of the parts in the assembly everytime i want the Pump to display a different color
2. Part-0 attached. Can the chrome color be displayed without the reflections?
ver.2012
You would like to have an option to disable reflections in the shaded views that you create.
We introduced from Inventor 2010 support for disabling reflections in drawings. In order to do this, users need to add DWORD registry key named "Suppress Specular Color" with value greater than zero under the following registry key.
Note:
Prior to creating this registry key, you need to have the following hotfix installed for Inventor 2010:
[URL]
For Inventor 2011, you need to have SP1 installed.
Â
Open the system registry and locate the following registry keys listed below (Start > Run > RegEdit):
1. Inventor 2010
[HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion14.0AppletsDrawingLayoutPreferences]
Create a key with this value:
"Suppress Specular Color"=dword:00000001
2. Inventor 2011
[HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion15.0AppletsDrawingLayoutPreferences]
Create a key with this value:
"Suppress Specular Color"=dword:00000001
If the key is not present or its value is zero or less, then reflections are enabled under drawings (Default behavior).
Note: The key is read only once per Inventor session - after adding the key or changing its value, users need to restart the Inventor session.
I want to create a background for a website wich has a worn out copper plated look (oil stains, scratches, dirt ect..) as shown on the picture below (also attached)
This is a building in Toledo, Ohio (University of Toledo Art Building)
So u guys have an idea of what i´m trying to re-create, now obviously my question is.. how in hells name do I create something like that using photoshop? I guess alot of filters.. or?
i´m using photoshop 7.0
Size will be 820x620/800x600 (72 dpi/webbased/png)
Below is an image I am trying to create using illustrator cs3, the wires are all a shiny copper gradient. I have tried so many different ways to do the transition from the circle to the straight wire and I cannot find any that really work.
View 25 Replies View RelatedI'm building a robot, and I have taken all these picture of metal objects in my city, but now I want all of my metal pics to be copper. What is the easiest & fastest way to take a image that is metal and make it copper and still retain it's texture?
View 8 Replies View RelatedI did some battery wraps for a company and they are being printed in China. The background is the default cmyk gradient "copper" and one is "silver" in AI. They are asking me to provide the Pantone or CMYK color code for these colors. Since they are a gradient I am not sure what to tell them.Â
View 4 Replies View RelatedI put in a grid of spotlights. But every time I render, the room looks incredibly dark but there are TONS of reflections. What is a good strategy for decreasing the reflections while brightening up the room?
View 6 Replies View RelatedI have a 3D drawing of a phone, and there seems to be a reflection or glare covering it and it is really annoying.
The screen portion is supposed to be white, as well as the buttons. The border of the black section is gray, as is the edge of the phone.
I Have this nice photo of the eye close up and I am attempting to show a reflection in it.
how to on this with some examples of the results.
I really like the look of graphic reflections I just don't know how to make them look good. I usually make a copy of the graphic to be relected and flip it upside down and position it correctly. At this point I don't know ho to proceed. It seems that the reflection should go from mostly opaque to fully transparent. How do you do that in Photoshop?
View 1 Replies View Relatedway to make reflections of things. Like text and brushes. Like for example..
I'll write "Chrissie" and then I want it the same underneath but like reflected.. If you get me. The same as brushes like I put a diamond and want the diamond to look like its sitting on something and theres a reflection..?
Has anyone had to do a reflection in an eye? Or does anyone know where I can get a tutorial to learn how to do this?
I basically want to take 2 images, one a close-up of an eye the other a logo. Then I want to make it look as if the logo is reflected in the eye.
I wanted to create some object where i could demonstrate he blur, array and other functions inside 3ds Max and i choose for that a simple box/sphere array. The problem iam facing are the reflections on the box model, they are looking too flat comparing to the sphere. Iam using arch&design materials and a hdr map inside environment (spherical) for reflections and the materials are the same on the box and sphere model, still the reflections are nice on the sphere, flat and ugly on the box
[URL]
I can't make 3d reflections to show in Photoshop. Here are the steps:
Create a 3d scene with white text standing vertically on a black rectangle (two meshes on one 3d layer).In the text mesh properties, set Reflections to 50 (tried 100, too). Set render settings to custom and ensure Reflections are checked.Set render quality to either Raytraced draft or final - both look the same. The renderer is working because I see a blue rectangle running across the screen. But when it stops, there are no reflections.
how to do a photo reflection fairly quickly and easily?
View 2 Replies View Relatedhow to do this type of relection.
I want to create a realistic reflection on a photo just like the one attached.
I have a picture that was taken on a very cloudy day through the window of a single engine aircraft. There is a considerable amont of glass reflection throughout the photograph which I would like to remove. Most of the reflection is seen in the clouds but there is also a condiderable amount in the water. Since the backround is mostly gray due to the weather the reflection shows up as a light grey to white against the grey. Could you tell me the best way to remove it? Is there a plug-in that will accomplish this quickly or must it be done through some other means?
Mac OSX 10.3.9
Powerbook G4/400
Photoshop CS
I wanted to do a water effect.
how to make this effect?
I want to remove all the reflections from this image.
I have encircled some of them.
How can I do this?
I am working on a cockpit interior for a spaceship and I am getting an odd render glitch both in my work viewport and in the renderer.
This mesh was created in Rhino 4 and imported via .obj. When it was initially imported it displayed perfectly but after, UVW unwrapping each quad is rendered as if it was made up of two triangles, and each triangle appears rounded.
Even stranger, if I turn on edged faces in my viewport it displays correctly again.
I am completely new to 3ds max for anything other than lighting so I'm sure that there is a simple (or complicated) explanation.
I'm trying to get the A&D material to render glossy reflection. The scene is reasonably big in dimensions. I used a photometric stadium light to light my scene and a skylight.
For the A&D material i didn't use the preset, thought i tried with about the same effect. The material has 1.0 reflectivity, 1.0 glossiness, 1.0 transparency and 1.0 glossiness.
For rendering i use MR with GI, nog FG (also tried that and has the same effect).
Im getting reflections on my walls when rendering. I want my walls to be clear white.
View 4 Replies View RelatedThis picture has reflective areas near the eyes and I do not like it. (particularly at the left side of the right eye). What is the best way to get rid of these reflections or specular highlights?
View 9 Replies View Relatedwant to make like a blue glowing object and I want it to be dark in the room and I want to have a person looking at the blue glowing object and I want them to have blue light all over their face and such. I was just wondering if anyone can point me in the right direction to finding out a tutorial or a step by step way to accomplish a real good realistic colored glow on a person?
View 1 Replies View RelatedI have to start off by apologizing for asking a question on my very first visit here... Sadly, I don't have a choice and if I don't find an answer to this question/figure out how to do this, my brain is going to explode and it's going to be messy.
(Working with Photoshop 7.0) Here's my problem: I have a picture of a woman coming out of a river. The river is banked with snake-like, winding ground with good sized grasses and a small layer of dirt layering to the water level.
I am trying to remove the reflections that are in the windows of my picture.
How can I go about doing it?