Is there a way to put a message box in an ilogic rule that gives information to the user but does not require interation to turn it off. Say on for a few seconds then dissappears?
View 1 Replieswhen I hover the cursor over my own custom toolbar buttons, I get the message "Press F1 for more help" you can then go to F1 but that only for Autocad commands not my own programs. My question is how can I get rid of the message "Press F1 for more help" when the cursor is over my custom program buttons?
View 6 Replies View RelatedI am growing increasinly frustrated. I just installed AutoCAD LT 2013 on my laptop. I managed to get everything customized the way I want, except the button icons on my (classic) toolbar are much too small. If I go into the menu and select 'use large icons', they are too huge. My screen resolution DOES NOT need to be changed or adjusted. I went to the help menu to see what I can do, and found that I can go into CUI and adjust the size of the button icons that way, via the button image editor, however there is no 'button image editor' dialog box when I select any given toolbar command.
View 1 Replies View RelatedI've created several (4) ilogic rules and want to run them by pressing a button. So I need a form with 4 start buttons. Can I create this with Ilogic in Inventor 2011 or do I need to be VBA expert?
View 3 Replies View RelatedHow to disable F1 button in Autodesk Inventor 2014?
I use ESC many times and it happens too often when i press F1 instead of ESC and then the whole help opens (either from hard drive or it opens my internet browser and loads up a page), its really annoying.
I tried in. "Tools" > "Customize" > "Keyboard" and sorted it with "key" but there is no F1 there.Also i changed category to "help" and to my suprise there is not a single key assigned to any of help command.
Then why still F1 opens help and makes my life harder than its already?
How to get more than one line of text into a Message Box if this is possible.
View 3 Replies View RelatedI don't use content center parts very often but on one particular file I have some screws that are coming up unresolved each time I open the file. How would I resolve this?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I get this every time i try to close an .ipt.
The current operation requires data from docuemt {location on my network{ but it cannot be found.
With the iAssembly I created I now have a message when I open the drawing informing me that i need to regenerate the factory. This terminology is new to me and I have not been able to accomplish this task. I have opened the assembly, selected manage, and updated the assembly with each of the iAssemblies active.
View 3 Replies View RelatedIn inventor it's possible to hide "for ever" a message box by a clic on "never show this message again ".
How is it possible to show this message again?
I am new to the ribbon and am having trouble putting more than one button on the same ribbon. I have two addins that both have buttons that need to go on the drawing>Place View tab but I can only see one button. If I put them on different tabs they both appear, what is my problem?
View 1 Replies View RelatedI have came across a couple that require you to use the design tab but I do not have a design tab. I then try and use the add ins button to intall it but when i click on it, nothing happens.
View 9 Replies View RelatedComing from a solidworks background, i frequently use weldments, or Inventor's equivalent - frame generator.
Wondering if there was a solidworks 'end cap' equivalent.
[URL] essentially a weldment driven and generated part which doesn't need much thinking about.
How to create a ribbon with a button. I am creating an add-in for Inventor. I am trying to put this code in the Activate Sub but it's not adding the ribbon once I open a drawing. Just trying to use this example to get me started.
public void AddParallelEnvironment(){ Application oApp = ThisApplication; // Get the Environments collection Environments oEnvironments = oApp.UserInterfaceManager.Environments; // Create a new environment Inventor.Environment oNewEnv = oEnvironments.Add("Some Analysis", "SomeAnalysis", null, null, null); // Get the ribbon associated with the assembly environment
[Code] ..........
how could I add a button to the zerodoc / Get started Tab?
View 2 Replies View RelatedI made a significant change to an assembly that messed up several constraints. I fixed all the constraints using the red cross button but the local update button is still lit up and won't do anything when I click it.
View 2 Replies View RelatedIs it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies View RelatedHow could I run an add-in from an external application (VB.NET)? How could I get the id of the installed apps?
How to simulate a PerformClick on a button of an add-in or run the main-form?
How to set to ProgressiveToolTip.Image Property for my new Inventor add-in ?
Dim mbp10 As ProgressiveToolTip
mbp10 = m_featureCountButtonDef10.ProgressiveToolTip
mbp10.Title = "main title"
mbp10.Description = "description for main title"
mbp10.ExpandedDescription = "extended description for main title"
mbp10.Image= ??? (as object)
i have 2 questions re: nailboard drawings.
When i try to use the edit button on the nailboard tab in order to add dimensions to the harness sketch. the environment changes and the harness sketch disappears. This makes it hard to dimension using the harness dimension button.
Secondly, i have modified the harness in the model and then saved the assembly. Why does my nailboard drawing not update after the save. (it recognizes that changes have been made) Deferred update is set to off. The nailboard drawing is useless if the updates are not automatic.
......alright i have 3 questions......i want to show the wire id near the stubs. i displayed properties but only one of 2 wire id's showed up. Has this got something to do with pick order? How can i get INV to display each wire (id) number?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
I've created a button that I've implemented into inventor. However I am at a loss as to how to create an icon for the button. I've read all the articles i can find (such as)
[URL]..
[URL]....
I've restarted the program and the computer multiple times but to no avail.
Error Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
View 1 Replies View RelatedWhy isn't there a way to disable these messages? Or is there a way?
I cannot be bothered to fix the trivialities of my assembly, and each time I update anything, that's one more click. I don't care about the cross part associations, as the parts exist as they need to.
Messages such as:
Cross Part Association has failed
This is the reason why my departments at work are considering Solidworks - Inventor is simply clunky - and it doesn't matter if the assembly has errors because of the modeling "mistakes" I make in this regard - I just need to supress these messages and get the work done.
afterthought - I know how to break links and clear associativity - but I just need a way to supress the error message. This would be very ideal, as it takes a while to go and break links and clear adaptivity. Often times, these errors crop up as engineering makes change orders to the part and it just crops up after revisions.
Just wondering whether there is a way to integrate iLogic error message into VB.NET code.
For example, if use following sentence to read the data from spread sheet.
LengthFloat=GoExcel.CellValue("tank_data.xls", "Gauges", "llg_arm_lgth")
if there is no such cell of "llg_arm_lgth", the error message appears as in attached file.
Right now I want to use "try...catch... end try" in the iLogic code. I can duplicate the first line of the warning message using VB.NET code, but I can not reach the second line. Does the iLogic expose this error message through some function? or which VB.NET code does this job?
My goal is to have a message box open as soon as an assembly file is opened so that other users will be warned/ notified of linked parameters. My assumption is that an iLogic rule would be the best way to handle this.
I can create the message box, but when I looked through the iLogic snippets I didn't find any way to trigger the box at opening the file.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I make a change to the effected parts/assemblies. Save them. Close them. Then open the .idw drawing, it begins updating the views. Then I get this message:
"The attempted operation did not produce a meaningful result. Try with different inputs."
It doesn't effect all the views, only one view. The other five views get updated without issue. The one view that doesn't is the parent view to two of the other views that update just fine.
I've tried rebooting my machine. Checked in all the files and opened them fresh after a reboot.
I'm getting this message after creating a new tube run: "H6705-51.ipt can only be saved in the context of H6705.Tube and Pipe Runs.iam"
I've never had this error come up. I added a tube run to an assembly and just couldn't save the new run. I tried opening the main tube run file and also the individual tube run but I get the same kind of error message.
One of our users, lets call him USER1, has recently received the following message when attempting to save an assembly:
"A later version of this file has been saved by USER1. Saving the file would overwrite changes which is not allowed. If you wish to preserve your changes, use the Save Copy As command."
To get to this error message, our user opens an IDW, then the IAM linked to that drawing. Changes made in the IAM are changing bolt lengths, adding fasteners from content center, things like that. After saving inside the IAM this message appears. There are multiple users on our network; but only this user is working the assembly in question when the message appears?
what makes this message appear, and how it can be avoided?
I used this command all the time in previous releases (when it was in the SDK tools). In 2011 Win 7 64bit, the dialog always says "cannot place at origin" or something similar yet it does place the component there but does not apply the constraints. (Also my "make components" command puts a slight offset to my parts which could be a related bug of some sort.) The only non-autodesk addins I have loaded are the trial kwikinsertnfix addin loaded and Brian Ekin's Sheetmetalextents addin loaded.
View 1 Replies View Related