I drew a part that has a 1/4" male npt on it. How do i replicate the npt in inventor. Its not a hole so i have tried that, is there an external thread generator other then "thread" ?
View 3 RepliesIs there a way to use iLogic to replicate the old-school method of replacing drawing references? (ie, where you'd temporarily rename the originally referenced file, open the drawing, and then point it to the new file after Inventor says it can't find the original)
Longer version:
I have an iLogic configurator that manipulates skeletal models, copies them out as new files, and swaps them into template drawings. The original skeletal model can be configured in several different ways (different features, surfaces, etc), so I have several template drawings set up for each model depending on the configuration.
The problem that I'm encountering involves the order in which the drawing is loaded and then has its references replaced. When first opened, the drawing loads the original skeletal model which doesn't have all the geometry of the "new" model for which the particular template drawing was intended. This makes most of my section and detail view constraints go belly-up. After subsequently replacing the model references with the "new" model with the correct geometry, the section and detail view constraints fail to resolve themselves, and my once-perfect detail drawing is ruined.
If I instead force the drawing to open with the new model from the git-go (via the workaround discussed above), everything loads perfectly. However, I haven't yet found a way to handle this automatically with iLogic.
FWIW, I am currently using the following code in a subroutine:
DESTINATIONDOC=ThisApplication.DOCUMENTS.Open(TemplateDrawing, False)
DESTINATIONDOC.SAVEAS(filePath&Left(PN,6)&".idw", False)
DimSTRNEWREFNAMEAsString
DimOREFFILEAsFILEDESCRIPTOR
[Code]....
Is there a way to have a dynamic arc block? I want to replicate the edit ability of a simple 3-point arc, where I can change the endpoint positions, arc length, and the midpoint which will change the radius/direction.
View 2 Replies View RelatedI scanned a photo I have of an Elvis impersonator and made this image, but I need to have the image at 300 dpi instead of the 72 dpi that I originally saved. So, I rescanned the image at the desired resolution and size, but I can't seem to remember how I got it to look like this.
View 4 Replies View RelatedI been trying to get the outline as in the above image, but i just cant get it right. I tried adding a Stroke, but every time i get smooth edges, instead of getting them like the above image. Is there a way how to get the outline around the numbers to look exactly the same?
View 4 Replies View RelatedWhen I select text in photoshop cs4, it seems to invert just the luminance (forgive me if my terminology is incorrect). That is to say, it doesn't change the color of stuff in the background, but it does invert whether it's light or dark. I've added an example to this post, the top text is selected and the bottom is not. I like the way the top selection looks and frequently would like to be able to do exactly this, and apply it to whole images. What's happening when you select text, is there a specific name for this effect, and how can I replicate it?
View 1 Replies View RelatedI've been trying to get this effect for this image but not such luck used high contrast and messed with the hue but nothing.
View 1 Replies View RelatedI have been trying to figure out the best way to replicate lane striping in 3ds Max. I am using survey data, so I would like the striping to match exactly.
Can this be done using viewport canvas? I've tried some tests, but the texture seems to "shift", and is also lower in quality/resolution than I care for.
I am looking to use this on stretches of roadway that are between 500ft-1500ft in length...
How to replicate the background of this picture. The concrete/wall texture is easy but the multicolor vignette is a little harder . Also the text is just 3dified in Photoshop right?
thesoullounge. se/wp-content/uploads/2011/10/justblaze_2nov_sthlm_webb.jpg
How the effects in these pictures can be replicated and possibly tell me or provide me with a PSD? These are some blood work for walls using in a game, due to the color burn and dark blend these look very realistic in this game :
Replicate.zip - ZIP for all the images
Hud_Splat_3.bmp - The best effect of them all is in this image.
Hud_Splat_4.bmp
Hud_Splat_5.bmp
Hud_Splat_6.bmp
I'm trying my best to replicate the font w/ the outline in Photoshop but I really can't seem to get it right at all.
View 3 Replies View Related replicate the filters and effects used on this photo? Obviously I know the subject matter has been cut and pasted as a new layer but I want to recreate the vintage style feel about it.what process has been done to background.
With autumn looming Id like to get some nice outdoor shots in the woods of my friends and family and then duplicate this filter style.
i've been driving myself to the edge of crazy over the past few hours trying to replicate this effect. i'm by no means a photoshop expert (obviously), but have used it for the past few years. still, i'm stuck at this and maybe it's really easy to solve. the effect i'm talking about is the following:
note how on the left side of the graphic, the item seems perfectly even with the background, yet on the right side it's "standing out" as if it was a sticker i have no problems achieving the background effect, but i'm stuck at how to get this effect done. i've tried rotating the graphic, twisting it, distorting it, but i can't seem to be able to replicate the effect correctly.
I'd like to look up how to replicate the effect in the image, but I'm too new to know what the effect is called.
I see two rectangles, and there's a "shadow" of some sort "under" the top rectangle.
What would you call that effect, and what tool would produce it?
I'm trying to replicate the type effect (upper arc and lower arc combined) that's shown in the example below in Illustrator. So far, my attempts haven't been fruitful. The example might be hand-drawn and there might not be a way to do it in illustrator.
View 1 Replies View RelatedI made this image a while ago and I can't remember quite how I did it. What I can remember is that I used rendering clouds and adding noise, channels, and changing the color at some point. I did most of it from this video: [URL]....
Â
But I didn't do everything from it, I tweaked something, it may have been the lighting rendering.
Â
The reason I want to recreate this is because I need a version of it in higher quality. It's supposed to have a rock texture look to it, and I made it look golden.
Â
how to replicate this.
I'm currently working on to pics and would like to cut the shaking hands on pic A and replicate this on pic B - How is this done - im on Photoshop 5.
View 1 Replies View RelatedI am trying to replicate the "football" text in this free template i got online. i want to use the school's team name instead of the word football... How to get the arc on the bottom of the text.
View 1 Replies View RelatedI work for a small non-profit and we don't have the resources to use the sort of freelance designers I would love to use, so I have to do a lot in-house. Recently I saw an effect that I would like to replicate.
It's a small image but you can see that it's a picture that's been blended with a cool blue effect. I would like to do this, but am not sure how to get there.
I'd like to replicate the text effect in the image posted here. Colors are not a factor because it will be toned when complete. The effect appears to have the text washed out in parts as well as not horizontally aligned. The alignment part isn't that critical however . the washed out look is what I'm looking for.
View 10 Replies View RelatedI would like to be able to replicate the shimmery fading in and out of the curtain so that I can make a wallpaper of it for my widescreen. I have tried making a random shape, fading out parts of it, and than doing a guassian over it, among other techniques to no avail... anyone have an idea how to replicate this effect?
View 6 Replies View RelatedI'd like to replicate a text style in GIMP that I've seen on this web button:
Rather than flat white color text there seems to be elements of grey of differing shades giving some depth to the text and also what I presume is a drop shadow beneath.
This is probably easy as pie to do, but I'm new to GIMP and don't know the term for this technique.
I previously used Gimp 2.6. When using the clone tool, I would press CTRL to set the source. When I would being painting with the clone, the source would move relative the mouse pointer location and I was able to make sure the gradients were correct.
With 2.8 it looks like the source stays put and I cannot clone see to get the gradients I am working with to clone right because I have to stay in line with the source. How to replicate the functionality of 2.6 with it?
Found paint.net and it seems pretty easy for me to do basics so I like it! I'm now trying to edit an image.
[URL]...
The background is a gradient, a highlight is applied and then the text and image.
I'd like to replicate the background highlight in my image but do not know how!? How to create this effect?
Any way to replicate an path object programmatically in a script? I'm searching for something like JavaScript's .toSource equivalent...
View 4 Replies View RelatedSomething has changed dramatically between X4 & X6 when printing color.
Using X4 right out of the box with no "tweaking" all pantone colors print perfect on Xerox 700 Digital Color Press.
Trying to print same pantone colors in X6 with no "tweaking" Â on Xerox 700 Digital Color Press, color is not even close.
Is there a way to setup X6 to replicate color management of X4.
I took a screenshot of an image I'm trying to replicate in Photoshop.
It's a simple right facing, filled arrow, encampassed in a circle. There's a perfect drop shadow/gradient effect going on to add a 3d effect. I'd like that on a transparent background if possible.
I can't seem to find how the original creator made this effect and he isn't around anymore. As you can see, the horizontal lines make the image appear as a ribbon and I just can't get the same effect.
View 1 Replies View RelatedI have been receiving advertisements for Pixio Photo Maximizer Professional 3 which claim that photographs can be enlarged without loss of detail and that it is easy to remove people/objects from photographs.
Â
Are these functions available in CS5 and, if so, how do I access them?
I like this effect to give a page more dynamics. Yet, i understand how they do it but i can't replicate it. [URL]...how to do this clean and solid?
View 9 Replies View RelatedI cannot think of a reasonable way to replicate the white fades (ignore the red stuff and type). Perhaps there is a simple procedure that I simply do no know about?
View 6 Replies View Related