I have modeled up a nut and bolt.
1. Have i matched the thread size correctly.I made the bolt thread the same size as the nut thread size
2. I see these in the Content centre but if i want to make my own nuts & bolts with various sizes.I can then just select the required sizes
3. How do you name your nuts & bolts.
We just upgraded from Inventor 2012 to 2014. When placing nuts and bolts in an assembly in 2012, you were able to select a hole and it would automatically size the bolt to the correct diameter. You could also select if you wanted it to fill in all holes of that size, on a face, with the bolt or you could just place one component.
I do not remember if it is just a setting that allows it that i can't find or if it is a bug and the drop function is not working properly, is there anything special that i need to do?
In the image below, I need the C channel that the bolts are going through to section but not the nuts and bolts. In application options I have "Section standard parts" set to "Obey browser settings". In the part "document settings" I have the "participate in assembly and drawing sections" option checked, but the C channel will not section and when I right click on it in the drawing browser, the "Section participation" options are greyed out.
View 3 Replies View RelatedI have Inventor 2012. When I open a file of a part or assembly that had been modeled the piece is displayed not centered nor fully visible. I have changed the document settings for modeled part to make the displayed area larger that the default 3.937" wide x 1.969" high which sort of works sometimes.
The model Origin seems to be centered while the modeled part is displayed off the screen. Is there a setting to have the model file open with the geometry extents displayed and centered? The thumbnail for the file looks correct. It seems like the template files would control this feature.
When I turn on shadow I just get a square under the part that I modeled. If I turn on ray tracing I get a detailed shadow but then I have to wait a minute or two every time i move the model. In the video tutorial it seems that the guy has a good shadow with no raytracing.
View 2 Replies View RelatedHow to make the nut in this assembly turn with the thread, all I can figure out how to do is put it all the way in then turn it 360 degrees.
i5 3570k@4.4ghz gtx 670, 8gb ddr3 1600mhz
When i convert idw (drawing) to dwg (AutoCAD) with Save as -> Save Copy as . I have problem with nuts
Inventor Professional 2013 update 1
see picture
I Am trying to make a flat of this attached part. The dimensions are correct for the part but I am trying to make it such a way that I can form it using a die with a press break. I tried many different ways but inventor doesn't seem to allow me to create a lofted flance using a 3-D profile sketch. How to get this part modeled as a sheet metal and have a right flat pattern?
View 4 Replies View RelatedI created an assembly with screws and nuts which are not from content center. When creating a section view on Drawing, screws and nuts are also sectioned, but I don't want to.
Is it possible to see entire screws and nuts in a section view?
How or where can I get in ipt - files of DIN 7504-K screws?
View 1 Replies View RelatedI`m going to make some different size bolts,nuts and washers and instead of creating each from scratch or from content center can i use either parameters,excel spreadsheet or ilogic to save me some time.Now i have never used any of the above features so am asking for some assistance and guidance in which would be the best way to do these tasks.
I make a sample bolt with Inventor 2012 version.Would this be easy to use any of the above mentioned to simply just change sizes and update the part and features to the new size?
What's the best way to populate the studs and nuts on a flanged connection in tube/pipe? Can studs be added to the bolted connection content?
2010 Routed SystemsInventor Professional 2014 Build 222
Dell Precision T3500, Intel Xeon W3550 3.07 GHz, 12GB RAM, Win7 SP1
Bolted connection, clevis pin and bearing are all not working for me. I can go through the steps of selecting the start plane and then the circular reference and the termination point. That is all successful but the bolt doesn't appear, whether I use a clevis pin or a bearing, I get the same result.
Working with sheet metal or FrameMaker all work fine. My content center shows all the bolts, clevis pins and bearings. The content center seems to be working fine. I'm using inventor 2011.
Myself and my coworkers have noticed that some times bolted connections will be missing a bolt. The bolt in question will appear again if you edit the bolted connection and hit ok and let it rebuild. But then another bolt in a different bolted connection will disappear. I just went back and forth between updating two sets of bolted connections and each time I updated one a bolt in the other disappeared. It's almost like there is a limit to how many bolts the assembly will show at once. The assemblies in question don't always have large numbers of bolts and other hardware though.
I'm running Inventor 2013 SP2 running Nvidia Driver Release 276.42 [8.17.12.7642], which is the last recommended driver. I've also run newer/older drives with no difference.
I have noticed that when I place a group of bolts in to a group of existing holes the pattern of bolts seem to be free to rotate about the hole selected when creating the bolt pattern.
I am using Inventor studio 2011 with windows 7
I am trying to generate bolted connections using the heavy hex bolts - this family does not appear when trying to select - I only get Cap Screws and standard Hex Bolts (amont the slotted varieties) - why no heavy hex hd. structural bolts?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
(Inv Pro 2012, XP64, Vaulted Project and Content Center)When I'm placing hardware, the Autodrop function is really convenient. Even better when the "multiple" pickbox is active, which from what I understand is when Inventor finds similar features on the same plane that the selected autodrop component could potentially mate to.
This is a huge time-saver, since I often have lots of bolted joints that all terminate on the same plane. Sometimes however, even when the parts lie in the same "plane", the plane isn't contiguous in that a feature breaks it across. No biggie, it just means I have to do two or three "multi-autodrops".
Once I put washers at the back side of the connections (which multiple works like a charm on), all of a sudden when I go to place nuts, each washer surface is now it's own plane, and multi-drop no longer recognizes all the other parts. This can be a real pain manually placing 30 or 40 nuts at a time.
I think the "Bolted Connection" option might work, but I really don't have a need to store all those subassemblies, name them, keep them vaulted properly, etc. That would be almost as much of a headache.
Also, most of the features that I'm connecting through are created as Hole features and as "nominal" oversized bolt holes as Inventor suggests when the "clearance hole" option is used for hole creation (not randomly extruded islands), but they aren't patterned as they don't follow a prescribed circular or rectangular pattern.
Am I missing something that I can do (like something stupid simple such as holding down the "alt" key or some crazy thing like that) that will allow inventor not just to suggest CONTIGUOUS planar features, but also CO-planar features so I can place all these nuts at once?
Short of creating a custom Content center part that consists of a nut / washer assembly I can't think of anything. And creating and publishing the nut washer assemblies will eat up some time too, since I have about 50 different combinations (some SAE washers with normal hex nuts, some SAE washers with ESNA hex, some USS washers with jam nuts, some USS Type B washers with all-steel locknuts, etc...)
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
What is the best way to assign different colors to different objects types (e.g. columns, and beams) or different colors to the same object type (e.g. columns) in a model?
View 1 Replies View RelatedIs it possible to add a standard wall opening in a wall that i have modelled in place?
I know i can add a void extrusion to the model just wondering if there's a setting i can change to allow me to use the standard wall opening comand.
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedCan't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies View RelatedUpgrading to a new computer.
1. What is the best CPU to use for Inventor between the i7 and the a Dual Xeon System
2. Would 32GB of memory easily cover all modelling such as assemblies?
3. Any advantage of having 2 x SSD instaed of 1 x SSD
4. Looking at the Nvidia GTX690 graphics card....this should be a good card
Is there a program that can make stp files from our inventor models? Our purchasing department wants to do this task for our vendors and they don't want in have a full version of Inventor to do it.
View 6 Replies View RelatedSo I installed TD Inventor Professional 30-Day free trial and I downloaded the installer and went through the download of the installer process and it made an autodesk inventor folder on my desktop. I click on it and it takes me into the C drive under the autodesk file Inventor 2012 TestDrive and has an Application called TDSetup. Once I click on it it does a load wheel then nothing happens.
I can't seem to find a solution and I just installed DirectX.
Inventor on a touch screen style PC, and if so... does it work? This hardware looks like it would be fun to work with, but I don't know if it's quite there yet for CAD work.
View 7 Replies View RelatedHow to set off the trim inventor does when one dimensions cross another one?
View 4 Replies View Relatedwe modeled prototypes of trains (locomotives) in 3dsMax, these models will be used to produce molds and thumbnails of these, you must give the producer STP files, max does not export these files, and we have exported in various formats supported by some programs if exported STP, eg Inventor, we have exported files are STL, oBJ and DWG, so far so good, all save the parts or layers without problem.
The problem comes when exporting from Inventor to STP, nothing happens, the STP file is as if you were empty, there is nothing ..
I have attached the DWG file, if possible, have 17 CAD models for export to STP.